Hybrid force and position control of a conducting tri-layer electro-active polymer actuator


COŞKUN M. Y., SANCAK C., Itik M., ALICI G.

TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, cilt.39, sa.3, ss.288-296, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 39 Sayı: 3
  • Basım Tarihi: 2017
  • Doi Numarası: 10.1177/0142331216659537
  • Dergi Adı: TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.288-296
  • Anahtar Kelimeler: Hybrid control systems, vision-based control, electro-active polymer actuators, conducting electro-active polymers, CPA
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

In this study, the displacement and blocking force of the tip point of a cantilevered electro-active polymer (EAP) actuator has been controlled for a cell injection process which consists of approaching, interacting and leaving steps. A vision-based system is used to acquire the tip displacement data for identifying a transfer function model of the actuator and its position control. Discrete time Proportional-Integral controllers are used to control the position and blocking force. A Smith Predictor is utilized in the vision-based position control system to compensate for the time delay due to image processing. Experimental position and blocking force results prove that the proposed control strategies are effective enough to guide the actuator to undertake the cell injection process. This study contributes to the previously published work from the point of view of simultaneously controlling the position and blocking force of the electroactive polymer actuators and widening their application areas.