Assessment of strength properties of cemented paste backfill by ultrasonic pulse velocity test


YILMAZ T., ERÇIKDI B., KARAMAN K., Kulekci G.

ULTRASONICS, cilt.54, sa.5, ss.1386-1394, 2014 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 54 Sayı: 5
  • Basım Tarihi: 2014
  • Doi Numarası: 10.1016/j.ultras.2014.02.012
  • Dergi Adı: ULTRASONICS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1386-1394
  • Anahtar Kelimeler: Ultrasonic pulse velocity, Unconfined compressive strength, Cemented paste backfill, Mixture properties, P-WAVE VELOCITY, COMPRESSIVE STRENGTH, TAILINGS, SULFATE, QUALITY, DENSITY, RATIO, ROCK
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

Ultrasonic pulse velocity (UPV) test is one of the most popular non-destructive techniques used in the assessment of the mechanical properties of concrete or rock materials. In this study, the effects of binder type/dosage, water to cement ratio (w/c) and fines content (<20 mu m) of the tailings on ultrasonic pulse velocity (UPV) of cemented paste backfill (CPB) samples were investigated and correlated with the corresponding unconfined compressive strength (UCS) data. A total of 96 CPB samples prepared at different mixture properties were subjected to the UPV and UCS tests at 7, 14, 28 and 56-days of curing periods. UPV and UCS of CPB samples of ordinary Portland cement (CEM I 42.5 R) and sulphate resistant cement (SRC 32.5) initially increased rapidly, but, slowed down after 14 days. However, UPV and UCS of CPB samples of the blast furnace slag cement (CEM III/A 42.5 N) steadily increased between 7 and 56 days. Increasing binder dosage or reducing w/c ratio and fines content (<20 mu m) increased the UCS and UPV of CPB samples. UPV was found to be particularly sensitive to fines content. UCS data were correlated with the corresponding UPV data. A linear relation appeared to exist between the UCS and UPV of CPB samples. These findings have demonstrated that the UPV test can be reliably used for the estimation of the strength of CPB samples. (C) 2014 Elsevier B. V. All rights reserved.

Ultrasonic pulse velocity (UPV) test is one of the most popular non-destructive techniques used in the

assessment of the mechanical properties of concrete or rock materials. In this study, the effects of binder

type/dosage, water to cement ratio (w/c) and fines content (<20

 

lm) of the tailings on ultrasonic pulse

velocity (UPV) of cemented paste backfill (CPB) samples were investigated and correlated with the corresponding

unconfined compressive strength (UCS) data. A total of 96 CPB samples prepared at different

mixture properties were subjected to the UPV and UCS tests at 7, 14, 28 and 56-days of curing periods.

UPV and UCS of CPB samples of ordinary Portland cement (CEM I 42.5 R) and sulphate resistant cement

(SRC 32.5) initially increased rapidly, but, slowed down after 14 days. However, UPV and UCS of CPB samples

of the blast furnace slag cement (CEM III/A 42.5 N) steadily increased between 7 and 56 days.

Increasing binder dosage or reducing w/c ratio and fines content (<20

 

lm) increased the UCS and UPV

of CPB samples. UPV was found to be particularly sensitive to fines content. UCS data were correlated

with the corresponding UPV data. A linear relation appeared to exist between the UCS and UPV of CPB

samples. These findings have demonstrated that the UPV test can be reliably used for the estimation

of the strength of CPB samples.