Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.845, 2020 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 845
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1016/j.jallcom.2020.156236
  • Dergi Adı: JOURNAL OF ALLOYS AND COMPOUNDS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Chimica, Communication Abstracts, Compendex, INSPEC, Metadex, Public Affairs Index, Civil Engineering Abstracts
  • Anahtar Kelimeler: Fe-Al intermetallics, Metal/metal composites, Stainless steel, AA 2024 alloy, MECHANICAL-PROPERTIES, MATRIX COMPOSITE, MICROSTRUCTURE, BEHAVIOR, RESISTANCE, ALLOY
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

In the present study, AA2024/316L stainless steel (SS) metal/metal composites (MMCs) with different 316L SS contents (1-25 wt%) were fabricated by mechanical milling and hot pressing. The effects of 316L SS and intermetallic phase contents on the corrosion and wear performances of the as-prepared MMCs were investigated. It was found that the hardness of the AA2024/25 wt% 316L SS composite increased to 180 HBN, whereas the value was 111 HBN for the AA2024 alloy. The wear rate of the AA2024/25 wt% 316L SS composite (0.03 mm(3)/m) was lower than that of the AA2024 alloy (0.29 mm(3)/m) under 20 N load. The corrosion performance of the samples was investigated by potentiodynamic polarization scanning in 3.5 wt% NaCl solution. Corrosion test results revealed that the corrosion resistance of the AA2024/1 wt% 316L SS composite (3.58 mpy) was better than that of the base alloy (9.27 mpy). Therefore, it can be inferred that Fe-Al intermetallic compounds played an important role in the corrosion and wear properties of the composites. (C) 2020 Elsevier B.V. All rights reserved.