ANALYSIS OF HEAT AND FLUID FLOW IN CONCENTRIC ANNULAR SQUARE DUCTS


KUCUK H., Avci M., AYDIN O., ASAN H.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, cilt.29, sa.1, ss.7-13, 2009 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 29 Sayı: 1
  • Basım Tarihi: 2009
  • Dergi Adı: ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.7-13
  • Anahtar Kelimeler: Laminar flow, heat transfer, annular duct flow, concentric, square ducts, constant wall temperature, 2/1 RECTANGULAR DUCTS, BOUNDARY-CONDITIONS, NUSSELT NUMBERS, LAMINAR-FLOW, MINERAL-OIL, VISCOSITY, MECHANISM
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

A numerical study is conducted on the heat and fluid flow characteristics in an annulus between two concentric square ducts. Inner and outer walls are assumed to be isothermal, but at different temperatures. The (flow through the annular duct is assumed to be laminar. steady, and both hydrodynamically and thermally fully developed with constant physical properties. For the Cartesian coordinate system, the governing equations are discretized by using the control volume method and are solved by the ADI method. The upwind scheme and the central difference scheme were employed to represent the convection and diffusion terms, respectively. The Stone's method was employed to solve the pressure-correction equation based oil the SIMPLE Algorithm. Solutions were obtained for air (Pr = 0.7). The velocity and temperature fields, the friction coefficients and Nusselt numbers are presented depending on the dimension ratio, a/b. With the increasing dimension ratio, it has been shown that the convective heat transfer is remarkably enhanced at the inner wall, while it becoming worse at the outer wall. The present results are compared with those for an annulus between two concentric cylinders and, finally, it is disclosed that the present or former geometry Suggest lower heat transfer rates and friction factors