Activation of Spruce Wood Surfaces by Plasma Treatment After Long Terms of Natural Surface Inactivation


AYDIN İ., DEMİRKIR C.

PLASMA CHEMISTRY AND PLASMA PROCESSING, cilt.30, sa.5, ss.697-706, 2010 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 30 Sayı: 5
  • Basım Tarihi: 2010
  • Doi Numarası: 10.1007/s11090-010-9244-5
  • Dergi Adı: PLASMA CHEMISTRY AND PLASMA PROCESSING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.697-706
  • Anahtar Kelimeler: Wood, Plasma treatment, Natural surface inactivation, Wettability, Bonding strength, WETTABILITY, FORMALDEHYDE, ADHESION, POLYPROPYLENE, EXTRACTION, OXYGEN, TIME
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

Surface inactivation is a phenomenon that causes poor adhesion. A wood surface exposed to contaminants such as dust or atmospheric grime can experience surface inactivation. Inactivation mechanisms can reduce the attractive forces on the wood surface and lead to a decrease in wettability. Plasma treatment has been applied to recover inactivated wood surfaces for better adhesion and bonding. Plasma treatment technology is very simple and the cost is rather low. In addition, this treatment produces no environmental pollution. In this study, low pressure plasma treatment was applied to reactivate the surfaces of spruce wood for glue bonding and to increase wettability after a 9-year period of natural surface inactivation. Changes in contact angles, surface energy, surface colour and bonding strength of inactivated and oxygen plasma treated wood surfaces were studied. Wettability, bonding and other mechanical strength properties of plywood panels increased with the oxygen plasma treatment.