Testing the Frame-Angle-Based Direct Torque Control for 3 phi Induction Motor Drives


Saleh S. A. , Özkop E. , Rubaai A.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, vol.57, no.3, pp.2918-2930, 2021 (Journal Indexed in SCI) identifier identifier

  • Publication Type: Article / Article
  • Volume: 57 Issue: 3
  • Publication Date: 2021
  • Doi Number: 10.1109/tia.2021.3057351
  • Title of Journal : IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
  • Page Numbers: pp.2918-2930

Abstract

This article presents the performance evaluation of the frame-angle-based (FAB) direct torque controller (DTC) for 3 phi induction motor drives (IMDs), which are fed by 3 phi six-pulse wavelet-modulated (WM) dc-ac power electronic converters (PECs). The tested DTC is designed to adjust the d(e)- and q(e)-axis components of the voltages (v(ds)(e) and v(qs)(e)) applied to a 3 phi IMD. The adjustments in v(ds)(e) and v(qs)(e) are created in response to changes in the load torque, command torque, drive speed, and/or system parameters. Desired adjustments in v(ds)(e) and v(qs)(e) are set by regulating the angle. of the frame created by v(ds)(e) and v(qs)(e). This frame produces reference modulating signals that are required to generate WM switching pulses for operating the 3 phi dc-ac PEC in the IMD. The complete IMD system, incorporating the FAB-DTC, is implemented for a 10-hp IMD system for performance evaluation. Tests of the FAB-DTC for the 10-hp IMD are conducted for various changes in the load torque, command torque, drive speed, and system parameters. Simulation and experimental test results demonstrate fast, accurate, reliable, and dynamic responses with minor sensitivity to variations in system parameters.