Decrease trends of ultimate loads of eccentrically loaded model strip footings close to a slope


CÜRE E., ŞADOĞLU E., TÜRKER E., Uzuner B. A.

GEOMECHANICS AND ENGINEERING, cilt.6, sa.5, ss.469-485, 2014 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 6 Sayı: 5
  • Basım Tarihi: 2014
  • Doi Numarası: 10.12989/gae.2014.6.5.469
  • Dergi Adı: GEOMECHANICS AND ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.469-485
  • Anahtar Kelimeler: bearing capacity, eccentrically loaded footings, footings resting close to slope, strip footings, plane-strain conditions, BEARING CAPACITY, BEHAVIOR
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

A series of bearing capacity tests was conducted with eccentrically loaded model surface and shallow strip footings resting close to a slope to investigate behavior of such footings (ultimate loads, failure surfaces, load-displacement curves, rotation of footing, etc.). Ultimate loads of footing close to slope decreased with increasing eccentricity for both surface and shallow footings. Failure surfaces were not symmetrical, primary failure surfaces occurred on the eccentricity side (the slope side) and secondary failure surfaces occurred on the other side. Lengths of failure surfaces decreased with increasing eccentricity. Footings always rotated towards eccentricity side a few degrees. For eccentrically loaded footing, decrease in ultimate load with increasing eccentricity is roughly in agreement with Customary Analysis.