The effects of nozzle aspect ratio and nozzle number on the performance of the Ranque-Hilsch vortex tube


Avci M.

APPLIED THERMAL ENGINEERING, cilt.50, sa.1, ss.302-308, 2013 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 50 Sayı: 1
  • Basım Tarihi: 2013
  • Doi Numarası: 10.1016/j.applthermaleng.2012.06.048
  • Dergi Adı: APPLIED THERMAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.302-308
  • Karadeniz Teknik Üniversitesi Adresli: Hayır

Özet

An experimental study is carried out to investigate the effects of nozzle aspect ratio and nozzle number on the performance of a vortex tube. Two sets of vortex generator (a single nozzle set with aspect ratio of AR = 0.25, 0.44 and 0.69 and a multiple nozzle set with 2 and 3 nozzle number having the same total flow area) are tested under different inlet pressures. Dry air is used as the working fluid. The experimental results reveal that the nozzle aspect ratio has a great effect on the energy/temperature separation mechanism. The increase in the nozzle aspect ratio leads to the larger mixing zones, which, in turn, decreases the temperature difference between the cold and hot stream, the heating and the cooling performance. The results also showed that the vortex tube with a single nozzle yields better performance than the vortex tube with 2 and 3 nozzles. (C) 2012 Elsevier Ltd. All rights reserved.