An experimental optimization study on a tube-in-shell latent heat storage


Aydin O., AKGUN M., Kaygusuz K.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, vol.31, no.3, pp.274-287, 2007 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 31 Issue: 3
  • Publication Date: 2007
  • Doi Number: 10.1002/er.1249
  • Journal Name: INTERNATIONAL JOURNAL OF ENERGY RESEARCH
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.274-287
  • Keywords: PCM, paraffin, thermal energy storage, melting, charging, tube-in-shell geometry, THERMAL-ENERGY STORAGE, PHASE-CHANGE MATERIAL, TRANSFER ENHANCEMENT, PARAFFIN WAXES, SYSTEMS
  • Karadeniz Technical University Affiliated: Yes

Abstract

Thermal energy storage (TES) using phase change materials (PCMs) has recently received considerable attention in the literature, due to its high storage capacity and isothermal behaviour during the storage (melting or charging) and removal (discharging or solidification). In this study, a novel modification on a tube-in-shell-type storage geometry is suggested. In the proposed geometry. the outer surface of the shell is inclined and it is the objective of this study to determine the optimum range for the inclination angle of the shell surface. Paraffin with a melting temperature of 58.06 degrees C, which is supplied by the Merck Company, is used as the PCM. The PCM is stored in the vertical annular space between an inner tube through which the heat transfer fluid (HTF), hot water, is flowing and a concentrically placed outer shell. At first, the thermophysical properties of this paraffin are determined through the differential scanning calorimeter (DSC) analysis. Temporal behaviour of the PCM undergoing a non-isothermal solid-liquid phase change during its melting or charging by the HTF are determined for different values of the inlet temperature and the mass flow rate of the HTF. The new geometry is shown to respond well with the melting characteristics of the PCM and to enhance heat transfer inside the PCM for a specific range of the shell inclination angle. Copyright (c) 2006 John Wiley & Sons, Ltd.