The potential for using the needle litter of Scotch pine (Pinus sylvestris L.) as a raw material for particleboard manufacturing


Nemli G., YILDIZ S., Gezer E. D.

BIORESOURCE TECHNOLOGY, cilt.99, sa.14, ss.6054-6058, 2008 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 99 Sayı: 14
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1016/j.biortech.2007.12.044
  • Dergi Adı: BIORESOURCE TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.6054-6058
  • Anahtar Kelimeler: particleboard, needle litter, mechanical properties, physical properties, decay resistance, MECHANICAL-PROPERTIES, BARK, PRUNINGS, BOARDS
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

Particleboard panels were made from various wood particle/needle litter of Scotch pine (Pinus sylvestris L.) mixtures bonded with urea formaldehyde resin. Litter was characterized by having higher solubility's in alcohol-benzene, with diluting alkali and hot water, and resulted in lower pH values than those of wood particles. The mechanical properties (modulus of rupture, modulus of elasticity, and internal bond strength) of boards containing up to 6.25% litter were lower than those of panels made from wood particles. However, needle litter usage improved the physical property (thickness swelling) and decay resistance of the panels, significantly. Panels consist of 6.25% and 12.50% needle litter met the minimum EN standard requirements of mechanical properties for general-purposes. Particle-boards contain more than 50% needle litter had the required level of thickness swelling for 24 h immersion. (C) 2007 Elsevier Ltd. All rights reserved.