Learning Knowledge


Doctorate
2015 - 2021
Karadeniz Technical University, Metalurji Ve Malzeme A.B.D., Turkey

Postgraduate
2012 - 2015
Karadeniz Technical University, Fen Bilimler Enstitüsü, Metalurji Ve Malzeme A.B.D., Turkey

Undergraduate
2008 - 2012
Karadeniz Technical University, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği, Turkey

Foreign Languages

English, C2 Mastery

Dissertations

Doctorate, Hidroksiapatit Matrisli Gümüş ve Karbon Nanotüp Takviyeli BiyokompozitlerinÜretimi ve Karakterizasyonu, Karadeniz Technical University, Fen Bilimleri Enstitüsü, 2021
Postgraduate, ALUMİNYUM- B4C PARÇACIK TAKVİYELİ METAL MATRİSLİ NANOKOMPOZİTLERİN ÜRETİMİ, İÇ YAPI, FİZİKSEL, MEKANİK VE TRİBOLOJİK ÖZELLİKLERİNİN İNCELENMESİ, Karadeniz Technical University, Mühendislik Fakültesi, Metalurji Ve Malzeme A.B.D., 2014

Academic Titles / Tasks


Assistant Professor
2023 - Continues
Karadeniz Technical University, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği

Lecturer
2022 - 2023
Karadeniz Technical University, Arsin Meslek Yüksekokulu, Elektrik Ve Enerji

Research Assistant
2012 - 2021
Karadeniz Technical University, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği

Research Assistant
2017 - 2017
Technische Universitaet Wien, Institute Of Materials Science And Technology, Materials Science And Engineering

Supported Projects

  1. VAROL T., ÇUVALCI H., BAYKAL S., DURAN C., ÇANAKÇI A., SARI A., ALTINTAŞ S. H., PÜRÇEK G., GEDİKLİ H., ÇUVALCI O., et al., Project Supported by Higher Education Institutions, Biyomedikal ve İleri Mühendislik Malzemelerinin Seçici Lazer Ergitme Yöntemi İle Üretimi, 2020 - Continues
  2. VAROL T., ÇUVALCI H., ALVER Ü., ÇANAKÇI A., ÖZKAYA S., GÜLER O., ÇELEBİ M., KARABACAK A. H., Project Supported by Higher Education Institutions, Bakır-Gümüş Alaşımlarının Akımsız Kaplama ve Sıcak Presleme Yöntemi ile Üretimi ve Karakterizasyonu, 2021 - 2023
  3. ÇANAKÇI A., ÖZŞAHİN Ş., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., KARABACAK A. H., ÇELEBİ M., Project Supported by Higher Education Institutions, AA2024 esaslı Nanopartikül Takviyeli Hibrit kompozit Yatak Malzemelerinin Üretimi ve Tribolojik Özelliklerinin İncelenmesi, 2019 - 2023
  4. VAROL T., ÇUVALCI H., ÇANAKÇI A., GEDİKLİ H., ERDEMİR F., ÖZKAYA S., ÇELEBİ M., KARABACAK A. H., ÖZŞAHİN Ş., Project Supported by Higher Education Institutions, Yapay Sinir Ağı Yöntemi ile Metalik Köpük Esaslı ve Fonksiyonel Kompozit Personel Zırhlama Plakalarının Geliştirilmesi, 2020 - 2022
  5. ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H., ÇANAKÇI S., Project Supported by Higher Education Institutions, Hidroksiapatit Matrisli Gümüş ve Karbon Nanotüp Takviyeli Biyokompozitlerin Üretimi ve Karakterizasyonu, 2018 - 2022
  6. ÇANAKÇI A., ÇUVALCI H., VAROL T., KARABACAK A. H., ÖZKAYA S., Project Supported by Higher Education Institutions, Simetrik olarak Fonksiyonel Derecelendirilmiş HidroksiapatitZirkonyaGrafen Hibrit İmplant Malzemesinin Toz metalurjisi Yöntemi ile Üretimi, 2018 - 2020
  7. ÇANAKÇI A., ÇELEBİ M., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., Project Supported by Higher Education Institutions, Zn40Al2Cu/B4C/Grafen Hibrit Kompozit Yatak Malzemelerinin Üretimi ve Tribolojik Özelliklerinin İncelenmesi, 2018 - 2020
  8. ÇANAKÇI A., ÖZTÜRK M., TUBITAK Project, Nano Ölçekli Bor Mineralleriyle Zenginleştirilmiş Ilık Karışım Asfaltın Reolojik Performansının Araştırılması Ve Dijital Görüntüleme Yöntemi İle Analizi, 2016 - 2018
  9. ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., VAROL T., Project Supported by Higher Education Institutions, Fonksiyonel derecelendirilmiş Al2024/B4C kompozitlerin üretimi, mekanik ve korozyon davranışının incelenmesi, 2015 - 2016

Scholarships

Erasmus, Special Institutions and Organizations, 2017 - 2017
Erasmus Öğrenci Değişim Programı Bursu, European Commission, 2010 - 2010

Published journal articles indexed by SCI, SSCI, and AHCI

  1. A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites
    ÇELEBİ M., ÇANAKÇI A., GÜLER O., Karabacak H., Akgül B., ÖZKAYA S.
    Journal of Alloys and Compounds, vol.966, 2023 (SCI-Expanded)
  2. The effects of different types and ratios of reinforcement, and machining processes on the machinability of Al2024 alloy nanocomposites
    KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., TUNÇ S. A., Çevik Z. A., YALÇIN E. D.
    Journal of Composite Materials, vol.57, no.18, pp.2811-2827, 2023 (SCI-Expanded)
  3. Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing
    ÇELEBİ M., ÇANAKÇI A., GÜLER O., ÖZKAYA S., KARABACAK A. H., Arpaci K. A.
    JOM, vol.74, no.11, pp.4449-4461, 2022 (SCI-Expanded)
  4. Mechanical properties of quenched and tempered steel welds
    UZUNALİ U. Y., ÇUVALCI H., ATMACA B., DEMİR S., ÖZKAYA S.
    MATERIALS TESTING, vol.64, no.11, pp.1662-1674, 2022 (SCI-Expanded)
  5. Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles
    KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.
    SILICON, vol.14, no.14, pp.8567-8579, 2022 (SCI-Expanded)
  6. Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites
    ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.
    JOURNAL OF ALLOYS AND COMPOUNDS, vol.845, 2020 (SCI-Expanded)
  7. Effect of the usage of Er,Cr:YSGG laser with and without different remineralization agents on the enamel erosion of primary teeth
    Yilmaz N., Baltaci E., Baygin O., Tüzüner T., Ozkaya S., Canakci A.
    LASERS IN MEDICAL SCIENCE, vol.35, no.7, pp.1607-1620, 2020 (SCI-Expanded)
  8. Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites
    KARABACAK A. H., Çanakçı A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, vol.111, no.5, pp.416-423, 2020 (SCI-Expanded)
  9. Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling
    VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.
    PARTICULATE SCIENCE AND TECHNOLOGY, vol.36, no.6, pp.742-750, 2018 (SCI-Expanded)
  10. Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites
    VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.
    PARTICULATE SCIENCE AND TECHNOLOGY, vol.36, no.3, pp.312-323, 2018 (SCI-Expanded)
  11. Effect of the B4C content and the milling time on the synthesis, consolidation and mechanical properties of AlCuMg-B4C nanocomposites synthesized by mechanical milling
    Ozkaya S., Canakci A.
    POWDER TECHNOLOGY, vol.297, pp.8-16, 2016 (SCI-Expanded)
  12. Corrosion and wear behavior of functionally graded Al2024/SiC composites produced by hot pressing and consolidation
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.
    JOURNAL OF ALLOYS AND COMPOUNDS, vol.644, pp.589-596, 2015 (SCI-Expanded)
  13. Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy
    ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.22, no.4, pp.425-432, 2015 (SCI-Expanded)
  14. New Coating Technique for Al-B4C Composite Coatings by Mechanical Milling and Composite Coating
    ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.
    POWDER METALLURGY AND METAL CERAMICS, vol.53, no.11-12, pp.672-679, 2015 (SCI-Expanded)
  15. SYNTHESIS AND CHARACTERIZATION OF HYBRID NANOCOMPOSITE POWDERS VIA MECHANICAL ALLOYING
    ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, vol.45, no.1, pp.67-72, 2015 (SCI-Expanded)
  16. Effects of a new pre-milling coating process on the formation and properties of an Fe-Al intermetallic coating
    ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmis R., ÖZKAYA S.
    POWDER TECHNOLOGY, vol.268, pp.110-117, 2014 (SCI-Expanded)
  17. Effect of process parameters on the formation of Fe-Al intermetallic coating fabricated by mechanical alloying
    ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, vol.21, no.6, pp.595-600, 2014 (SCI-Expanded)
  18. Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy
    ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.
    POWDER METALLURGY AND METAL CERAMICS, vol.53, pp.275-287, 2014 (SCI-Expanded)
  19. Microstructure and properties of Fe-Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying
    ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.73, pp.849-858, 2014 (SCI-Expanded)
  20. Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying
    ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.
    MICRO & NANO LETTERS, vol.9, no.2, pp.109-112, 2014 (SCI-Expanded)
  21. Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique
    ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.
    POWDER TECHNOLOGY, vol.247, pp.24-29, 2013 (SCI-Expanded)

Articles Published in Other Journals

  1. Comparison of the abrasive effects of children's toothpaste on glass ionomer cement
    YILMAZ N., AVCI G., ÖZKAYA S., TÜZÜNER T., BAYGIN Ö.
    PEDIATRIC DENTAL JOURNAL, vol.31, no.2, pp.145-151, 2021 (ESCI)
  2. The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites
    ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.
    UNIVERSAL JOURNAL OF MATERIALS SCIENCE, vol.6, no.5, pp.163-169, 2018 (Peer-Reviewed Journal)
  3. PRODUCTION AND PROPERTIES OF AL2024-2 WT. (SiC-B4C) HYBRID NANOCOMPOSITE
    KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.
    Technological Applied Sciences, vol.13, no.1, pp.29-33, 2018 (Peer-Reviewed Journal)
  4. Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology
    Nazik C., Tarakçıoğlu N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.
    International Journal of Materials, Mechanics and Manufacturing, vol.4, no.4, pp.251-254, 2015 (Peer-Reviewed Journal)
  5. Artificial Neural Network Approach to Predict the Abrasive Wear of AA2024-B4C Composites
    ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.
    Universal Journal of Materials Science, no.6, pp.111-118, 2014 (Peer-Reviewed Journal)
  6. Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method
    ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.
    Universal Journal of Materials Science, vol.2, pp.90-95, 2014 (Peer-Reviewed Journal)
  7. Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying
    Nazik C., Tarakçıoğlu N., ÇANAKÇI A., VAROL T., ÖZKAYA S.
    Usak University Journal of Material Sciences, no.1, pp.47-53, 2014 (Peer-Reviewed Journal)
  8. Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method
    ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S., Dalmış R.
    Usak University Journal of Material Sciences, no.1, pp.15-22, 2014 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

  1. Machining of Metal Matrix Hybrid Nanocomposites with WEDM Method
    Karabacak A. H., Çanakçı A., Tunç S. A., Özkaya S.
    1st International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 1 - 03 November 2021, pp.502-506
  2. Investigation of the Effect of Temperature and Foaming Time on AA2024 Based Metal Foam Production
    Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.
    1st International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 1 November - 03 December 2021, pp.494-497
  3. Production of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposites by Powder Metallurgy Method and Investigation of Mechanical Properties
    Özkaya S., Çanakçı A., Karabacak A. H., Çanakçı S., Ceylan E.
    IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Turkey, 10 - 13 December 2020, pp.1-2
  4. Corrosion performance of AA2024-316L SS Metal-Metal composites
    Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F.
    IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Turkey, 10 - 13 December 2020, pp.1-2
  5. Wear Behavior of AA2024-316L SS Metal Metal Composites
    Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.
    IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Turkey, 10 - 13 December 2020, pp.1-2
  6. Synthesis and Investigation of Antibacterial Activity of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposite
    Özkaya S., Çanakçı A., Çanakçı S., Ceylan E.
    IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Turkey, 10 - 13 December 2020, pp.1-2
  7. Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy
    KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.
    3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 - 21 September 2019, pp.710-715
  8. Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics
    ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.
    3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 September - 21 November 2019, pp.645-650
  9. Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites
    KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.
    3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 - 21 September 2019, pp.716-720
  10. The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites
    ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.
    3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 - 21 September 2019, pp.1157-1161
  11. The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites
    ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.
    3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 September - 21 November 2019, pp.1162-1165
  12. Consodilation and Investigation of Properties of Hydroxyapatite-316L Stainless Steel Composites
    Karabacak A. H., Özkaya S., Çanakçı A., Varol T., Çelebi M., Erdemir F.
    1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Turkey, 27 - 29 June 2018, pp.828-834
  13. PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE
    VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.
    19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Turkey, 25 - 27 October 2018, pp.5-7
  14. The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials
    ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.
    8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Turkey, 19 - 22 October 2017, pp.1752-1756
  15. The Investigation of Wear Performance of Fe/B4C/Graphene Hybrid Nanocomposites
    ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., ERDEMİR F.
    8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazığ, Turkey, 19 - 22 October 2017, pp.23
  16. Effect of powder morphology on properties of Metal Matrix Composite Materials
    Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A.
    International Advanced Researches & Engineering Congress, Osmaniye, Turkey, 16 - 18 November 2017, pp.800
  17. Production and Properties of Al2024- 2 wt. (SiC-B4C) HybridNanocomposite
    KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.
    International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 21 - 23 September 2017, pp.1322-1327
  18. Metal Foams Produced by Powder Metallurgy Methods and Applications
    ÇANAKÇI A., KESKİN Ö. Y., ÖZKAYA S., ÇELEBİ M.
    8th International Advanced Technologies Symposium, Elazığ, Turkey, 18 - 22 October 2017, pp.27-30
  19. Production of Aluminum foam with TiH2
    ÇANAKÇI A., ÖZKAYA S., KESKİN Ö. Y.
    8th International Advanced Technologies Symposium, Elazığ, Turkey, 18 - 22 October 2017, pp.1900-19002
  20. Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying
    KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.
    8th International Advanced Technologies Symposium, Elazığ, Turkey, 18 - 22 October 2017, pp.1299-1304
  21. Production of Biomaterials by Powder Metallurgy Methods and Applications
    ÖZKAYA S., ÇANAKÇI A., ÇELEBİ M., KESKİN Ö. Y.
    8th International Advanced Technologies Symposium, Elazığ, Turkey, 18 - 22 October 2017, pp.26-29
  22. Microstructure and Mechanical Properties of Al2024-B4C Nanocomposite Produced by Mechanical Alloying and Hot Pressing Method
    KARABACAK A. H., ÖZKAYA S., ÇANAKÇI A., ÇALIGÜLÜ U.
    8th International Advanced Technologies Symposium, Elazığ, Turkey, 18 - 22 October 2017, pp.1285-1289
  23. A Review on The Powder Coating with Mechanical Milling
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.
    3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.228-232
  24. Application of Artificial Neural Network for Prediction of Coating Thickness in Fe-Al Coatings
    VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.
    3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 October 2017, pp.210-214
  25. A Review on the New Armour Ceramic Meterials
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.
    4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosnia And Herzegovina, 28 - 30 June 2017, pp.381-385
  26. Effect of Processing Parameters on AlCuMg Metallic Foams
    ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.
    Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 April 2017, pp.636-640
  27. Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials by Using Mechanical Alloying and Investigation of Their Properties
    OKUR O., ÖZKAYA S., ÇANAKÇI A., ÇALIN R.
    Fabrication of B4C Reinforced Al 5083 Matrix Composite Materials Using byMechanical Alloying and Investigation of Their Properties, 6 - 08 April 2017
  28. Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams
    ÇANAKÇI A., ÖZKAYA S., VAROL T., ÇELEBİ M., KESKİN Ö. Y., KARABACAK A. H.
    2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.636-640
  29. Metal Foams
    VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.
    2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.641-649
  30. Fonksiyonel Derecelendirilmiş Al2024/ B4C Nanokompozitlerinin Balistik Performansları
    ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.
    2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Turkey, 6 - 08 April 2017, vol.2, pp.16-20
  31. The ballistic performance of Functionally Graded Al2024/B4C Nanocomposites
    ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.
    2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.650-656
  32. Properties of Silicon Carbide Reinforced Nanocomposites Prepared by Flake Powder Metallurgy Processing
    VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.
    16th International Materials Symposium, 12 - 14 October 2016, pp.1346-1352
  33. Metallic Biomaterials Biocompability and Mechanical Properties
    VAROL T., ÇANAKÇI A., ÇUVALCI H., ÖZKAYA S.
    16th International Materials Symposium, 12 - 16 October 2016, pp.1102-1109
  34. Devolopment of surface response methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating
    ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.
    1st International Mediterranean Science and Engineering Congress, 26 - 28 October 2016, pp.2025-2030
  35. Development of response surface methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating
    ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.
    1st International Mediterranean Science and Engineering Congress, 26 - 28 October 2016, pp.2025-2030
  36. EFFECT OF MECHANICAL ALLOYING ON CORROSION BEHAVIOUR OF AlCuMg B 4 C NANOCOMPOSITES
    ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.
    14.ULUSLARASI KOROZYON SEMPOZYUMU, 5 - 07 October 2016, pp.526-530
  37. Corrosion properties of Al2024/SiC composites compared with Al2024/B4C composites.
    ERDEMİR F., ÇANAKÇI A., ÖZKAYA S., YALÇIN E. D.
    XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Turkey, 5 - 07 October 2016, no.55, pp.23-26
  38. Mekanik Alaşımlamanın AlCuMg/B4C Nanokompozitlerinin Korozyon Davranışı Üzerine Etkisi
    ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.
    XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Turkey, 5 - 07 October 2016, pp.526-530
  39. Study on Microstructure and Wear Properties of B4C Nanoparticles reinforced ZA27 nanocomposites
    YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.
    International Conference of Engineering and Natural Sciences, 24 - 28 May 2016, pp.2850-2853
  40. Corrosion Behavior of AlCuMg B4C Nanocomposites Produced by Powder Metallurgy
    ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.
    ICENS2016, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2846-2849
  41. Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites
    YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.
    International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2850-2853
  42. Functionally Graded Materials
    VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.
    International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.1643-1649
  43. Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique
    ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.
    International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.361
  44. Corrosion Behavior of AlCuMg/B4C Nanocomposites Produced by Powder Metallurgy Method
    ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.
    International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2846-2849
  45. Determination of Effect of B4C Content on Densityand Tensile Strength of AA7075 B4C Composite Produced via Powder Technology
    NAZİK C., TARAKÇIOĞLU N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.
    OPTIROB, ICAEM, ICREB 2015, 26 - 29 June 2015
  46. THE EFFECT OF MILLING TIME ON MECHANICAL PROPERTIES OF ALCUMG-B4C NANOCOMPOSITES PRODUCED BY HIGH ENERGY MILLING
    ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.
    International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 December 2015, pp.26-30
  47. EFFECT OF B4C CONTENT AND MILLING TIME ON WEAR BEHAVIOUR OF MECHANICALLY ALLOYED AlCuMg NANOCOMPOSITES
    ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.
    Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.173-179
  48. EFFECT OF MECHANICAL ALLOYING ON MECHANICAL PROPERTIES OF AlCuMg-B4C NANOCOMPOSITES
    ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.
    Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.186-192
  49. THE MICROSTRUCTURE OF NANO B4C PARTICLE REINFORCED Al-Cu-Mg ALLOY MATRIX NANOMPOSITES PRODUCED BY FLAKE POWDER METALLURGY METHOD
    ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.
    Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.585-590
  50. B4C ve Grafen Nano Parçacıkları ile Güçlendirilmiş ZA27 Alaşımının Mikro Yapısı ve Aşınma Davranışlarının İncelenmesi
    YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.
    MÜHENDİSLİKTE YENİ TEKNOLOJİLER SEMPOZYUMU MYT 2015, Bayburt, Turkey, 22 - 24 October 2015, pp.1-4
  51. WEAR BEHAVIOR OF AL2024/SIC COMPOSITES PRODUCED BY POWDER METALLURGY METHODS
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.
    TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.11-15
  52. EFFECT OF B4C ADDITION ON WEAR BEHAVIOUR OF AlCuMg NANOCOMPOSITES
    ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.
    TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.16-19
  53. PRODUCTION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/SiC-B4C HYBRID COMPOSITES BY HOT PRESSING PROCESS
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.
    International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.36-39
  54. THE EFFECT OF MILLING TIME AND PARTICLE SIZE ON THE FLAKE MORPHOLOGY AND FLAKE PARTICLE SIZE OF Al-Cu-Mg ALLOY POWDERS PREPARED VIA MECHANICAL MILLING
    ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.
    International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.21-25
  55. MICROSTRUCTURAL CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/Sic COMPOSITES PRODUCED BY HOT PRESSING AND CONSOLIDATION
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.
    International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.31-35
  56. Production by Gas Atomization and Characterization of AA7075 Metal Powders
    Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A.
    The International Conference On Science, Ecology And Technology I, Vienna, Austria, 25 - 28 August 2015, pp.446-452
  57. Effect of The Different Milling Process on The Formation of Fe-Al Intermetallic Coating on Low-Carbon Steel
    ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmış R., ÖZKAYA S.
    15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.88-96
  58. Fabrication of Functionally Graded Al 2024/B4C Composites By Powder Metallurgy
    ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.
    15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.97-103
  59. Wear and Corrosion Behavior of Fe-Al Intermetallic Coatings on the Low Carbon Steel Synthesized by Mechanical Alloying
    ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.
    15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.104-113
  60. Synthesis And Characterization Of B4c Particles Reinforced Al-Cu-Mg Alloy Matrix Nanocomposite Powders By High Energy Mechanical Milling
    ÖZKAYA S., ÇANAKÇI A., VAROL T.
    17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.459-463
  61. Artifical neural network approach for the prediction of coating thickness in Fe-Al caoatings fabricated by mechanical milling
    ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZŞAHİN Ş., ÖZKAYA S.
    17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.995-1003
  62. Production and characterization of Bronze-Cr-Ni composites produced by powder metallurgy
    ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.
    17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.207-213
  63. Biyomalzemeler
    ÇANAKÇI A., DALMIŞ R., VAROL T., ERDEMİR F., ÖZKAYA S.
    II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.649-660
  64. Mekanik Alaşımlama Yöntemi Ile Cusn10-B4c-Grafit Hibrit Nanokompozit Tozlarının Üretimi
    ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.
    II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.789-795
  65. B4c Particle Takviyeli Al2024 Metal Matrisli Kompozitlerin Özellikleri Üzerine Sıcak Presleme Parametrelerinin Etkisi
    ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.
    II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.642-650
  66. Mekanik Alaşımlama Yöntemi Ile Düşük Karbonlu Çelik Üzerine Al-B4c Kompozit Kaplamalarının Sentezi
    ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S., DALMIŞ R.
    II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.371-379
  67. AA7075 Metal Matrisli %10 B4c Parçacık Takviyeli Kompozitlerin Mekanik Alaşımlama Yöntemiyle Üretimi Ve Özelliklerinin Geliştirilmesi
    Nazik C., Tarakçıoğlu N., ÖZKAYA S., ÇANAKÇI A., VAROL T.
    II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.317-321
  68. Effects Of Different Process Control Agent On Characteristics Of Mechanically Milled Al2024 Powders
    ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., VAROL T.
    International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.804-808
  69. Abrasive Wear Behavior Of Powder Metallurgy Cusn10-Graphite Metal Matrix Composites Produced By Powder Metallurgy
    ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.
    International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.58-62
  70. Fabrication Of Fe-Al Intermetallic Coatings Using Mechanical Milling Technique
    ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.
    International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.809-813
  71. Abresive wear behavior of powder metalurgy CuSn10 Graphite metal matrix composites produced by powder metallurgy
    YALÇIN E. D., çanakçı a., varol t., özkaya s., erdemir f.
    International Porous Powder Materials Symposium and Exhibition PPM2013, İzmir, Turkey, 3 - 06 September 2013, pp.4
  72. Production Of Al-B4c Functionally Graded Material By Powder Metallurgy Method
    ÇANAKÇI A., VAROL T., Zerrin i., ÖZKAYA S.
    6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.49-56

Academic and Administrative Experience

2023 - Continues Deputy Head of Department Karadeniz Technical University, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği

Patent

Çanakçı A., Özkaya S., Karabacak A. H., Varol T., Çuvalcı H., Simetrik olarak fonksiyonel derecelendirilmiþ hidroksiapatitzirkonya- grafen hibrit implant malzemesinin toz metalurjisi yöntemi ile üretimi., Patent, CHAPTER C Chemistry; Metallurgy, The Invention Registration Number: TR 2018 17143 B , Standard Registration, 2023

Metrics