MECHANICAL PERFORMANCE OF FDM-FABRICATED PLA COMPOSITES REINFORCED WITH SILVER-COATED COPPER PARTICLES
16th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences , Baku, Azerbaycan, 20 - 22 Eylül 2026, ss.321-327, (Tam Metin Bildiri)
- Yayın Türü: Bildiri / Tam Metin Bildiri
- Basıldığı Şehir: Baku
- Basıldığı Ülke: Azerbaycan
- Sayfa Sayıları: ss.321-327
- Karadeniz Teknik Üniversitesi Adresli: Evet
Özet
The development of polymer matrix composites (PMCs) for additive manufacturing has attracted increasing scientific interest due to their potential to tailor the mechanical and surface characteristics of FDM-fabricated components. In the present study, polymer composite specimens were fabricated via FDM using a PLA-based composite filament containing 2 wt.% silver-coated copper (AgCu) particles. The composite filament was produced by melt mixing PLA granules with AgCu particles, followed by extrusion in a filament production system to obtain a final composite filament with a nominal diameter of 1.75 mm suitable for FDM processing. The mechanical performance of the FDM-fabricated specimens was evaluated in terms of tensile strength, elongation at break, and Shore D hardness. Tensile testing was performed to characterize the tensile response and load-bearing capability of the specimens, whereas Shore D hardness measurements were conducted to assess the surface hardness of the AgCureinforced PLA composites. The obtained tensile and hardness results provided insight into the influence of AgCu particle incorporation on the mechanical response of the PLA matrix and enabled the contribution of the composite structure to the resulting mechanical properties to be assessed. The tensile and Shore D hardness measurements demonstrated that the developed composite filament could be effectively processed using the FDM technique and that the mechanical performance of the fabricated specimens was strongly associated with the selected processing conditions and specimen geometry. The results indicate that PLA-based composite filaments containing 2 wt.% AgCu particles can be successfully manufactured and employed in FDM-based additive manufacturing, while the measured tensile and hardness characteristics demonstrate the potential of AgCu incorporation for tailoring the mechanical performance of PLA-based polymer matrix composites.