Particle sıze effect on the liquefactıon characteristcs of clean sand


ERTOSUN KARABULUT Z., ZEYBEK A., İKİZLER S. B.

Sadhana - Academy Proceedings in Engineering Sciences, vol.49, no.4, 2024 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 49 Issue: 4
  • Publication Date: 2024
  • Doi Number: 10.1007/s12046-024-02592-y
  • Journal Name: Sadhana - Academy Proceedings in Engineering Sciences
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Communication Abstracts, Compendex, INSPEC, Metadex, zbMATH, Civil Engineering Abstracts
  • Keywords: Excess pore water pressure, grain size, liquefaction
  • Karadeniz Technical University Affiliated: Yes

Abstract

The increase in pore water pressure, directly associated with the compressibility of loose sands under seismic loading, induces liquefaction, resulting in a decrease in effective stresses and, consequently, a loss of soil strength and stiffness in saturated sandy soils. For a long time, geotechnical engineers have found it difficult to understand the phenomenon of soil liquefaction. It is crucial to look into the factors influencing the liquefaction and/or softening of soil as well as the production and evolution of pore water pressure to have a deeper knowledge of the liquefaction phenomena. The size of the particles is one of the important factors. The purpose of this work is to examine how sand particle size, repetitive loading, and undrained circumstances affect the development of excessive pore water pressure. SEM and EDX imaging were conducted to determine the characteristics of three different sands. To ascertain the parameters of shear resistance, three sands with varying gradations were chosen and subjected to direct shear tests. For each of the three sands with varying particle sizes, cylindrical triaxial test specimens were made, and a set of dynamic triaxial tests under stress control were performed. The specimens were tested at various repeated stress ratios (CSR) using loading frequency of 0.1 Hz after being isotropically consolidated under an effective stress of 100 kPa. Experiments on three different sands with varying grain sizes and shapes revealed increased liquefaction potential with a reduction in grain diameter. It was observed that as the cyclic shear strain increased, the sand samples reached liquefaction at lower cycles. Additionally, it was noted that incorporating empirical coefficients that consider grain size and shape into the prediction of pore water pressure improved compatibility with models commonly used in the literature, leading to better results.