A comparative study on some physical and mechanical properties of Laminated Veneer Lumber (LVL) produced from Beech (Fagus orientalis Lipsky) and Eucalyptus (Eucalyptus camaldulensis Dehn.) veneers

Aydin, İSMAİL; Colak, SEMRA; Colakoglu, GÜRSEL; Salih, E

doi:10.1007/s00107-004-0464-3

A comparative study on some physical and mechanical properties of Laminated Veneer Lumber (LVL) produced from Beech (Fagus orientalis Lipsky) and Eucalyptus (Eucalyptus camaldulensis Dehn.) veneers

Atıf İçin Kopyala

Aydin I., Colak S., Colakoglu G., Salih E.

HOLZ ALS ROH-UND WERKSTOFF, cilt.62, sa.3, ss.218-220, 2004 (SCI-Expanded)

Yayın Türü: Makale / Tam Makale
Cilt numarası: 62 Sayı: 3
Basım Tarihi: 2004
Doi Numarası: 10.1007/s00107-004-0464-3
Dergi Adı: HOLZ ALS ROH-UND WERKSTOFF
Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
Sayfa Sayıları: ss.218-220
Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

Laminated Veneer Lumber (LVL) panels made from eucalyptus (Eucalyptus camaldulensis Dehn.) and beech (Fagus orientalis Lipsky.) veneers were tested for physical and mechanical strength properties in this study. Urea formaldehyde (UF) and Polyvinyl acetate (PVA) adhesives were used for eucalyptus LVL panels and UF adhesive for beech LVL panels. The effect of veneer wood species on some physical and mechanical properties was found statistically significant. Also, different glue species caused the differences in strength properties of LVL panels.