Effect of mechanical milling time on powder characteristic, microstructure, and mechanical properties of AA2024/B4C/GNPs hybrid nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

POWDER TECHNOLOGY, cilt.449, 2025 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 449
  • Basım Tarihi: 2025
  • Doi Numarası: 10.1016/j.powtec.2024.120439
  • Dergi Adı: POWDER TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Applied Science & Technology Source, Chemical Abstracts Core, Chimica, Communication Abstracts, Compendex, Computer & Applied Sciences, INSPEC, Metadex, Civil Engineering Abstracts
  • Karadeniz Teknik Üniversitesi Adresli: Evet

Özet

In this study, hybrid nanocomposites consisting of an AA2024 matrix reinforced with 1 wt% B4C nanoparticles and 1 wt% GNPs were produced using a powder metallurgy method assisted by mechanical milling. This study aimed to systematically investigate the effect of grinding time on powder characteristics (particle size, microhardness, and morphology) as well as microstructure, densification, and mechanical performance to optimize processing conditions for superior material properties. Microstructural characterization of powders and bulk samples were carried out using a SEM device equipped with EDS. The results indicate that with increasing milling time, the particle size significantly decreased, while the particle hardness increased substantially. Additionally, the sample milled for 8 h achieved the highest relative density among the hybrid nanocomposites, reaching a value of 95.3 %. Mechanical tests revealed that after 8 h of milling, the hardness and tensile strength reached peak values of 164 HB and 314 MPa, corresponding to increases of 56 % in hardness and 43 % in tensile strength compared to the unreinforced alloy. The analysis results confirm that the optimal properties were obtained after 8 h under all conditions.