WOOD RESEARCH, vol.68, no.3, pp.572-581, 2023 (SCI-Expanded)
The aim of this study is to investigate the effect of using vermiculite on the thermal, physical and mechanical properties of cement-bonded particleboards. For this purpose, single-layer cementitious particle boards with a final density of 1200 kg/m3 and a size of 550 x 550 x 10 mm were produced using 2 type vermiculites (crude and expanded) at three different ratios (5%, 10% and 15%). The produced boards were examined in terms of thermal (TGA/DTG), physical (moisture content, density, water absorption and thickness swelling), mechanical (modulus of rupture, modulus of elasticity, internal bond strength and screw withdrawal resistance) properties. According to the TGA results, using both types of vermiculite caused an increase in cement hydration products in the boards and increased the thermal resistance. While the use of vermiculite did not significant effect on the density and moisture content of the boards, it increased the dimensional stability of the boards. The values of modulus of rupture and modulus of elasticity increased when the low amount of vermiculite was added. However, with the use of vermiculite in the boards, there was a decrease in the internal bond strength and screw withdrawal resistance values in general. All boards produced using vermiculite met the values specified in EN standards.