PRODUCTION AND MORPHOLOGICAL CHARACTERIZATION OF SILVER-COATED COPPER-REINFORCED PLA COMPOSITE FILAMENTS
16th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences, Baku, Azerbaycan, 20 - 22 Eylül 2026, ss.314-320, (Tam Metin Bildiri)
- Yayın Türü: Bildiri / Tam Metin Bildiri
- Basıldığı Şehir: Baku
- Basıldığı Ülke: Azerbaycan
- Sayfa Sayıları: ss.314-320
- Karadeniz Teknik Üniversitesi Adresli: Evet
Özet
Developing the properties of polymeric filaments used in additive manufacturing technologies is of great importance for enhancing the functional and structural performance of fabricated parts. In this study, composite filaments were produced by incorporating 2 wt.% silver-coated Copper (AgCu) particles into a PLA matrix. For the preparation of the composite material, PLA granules and AgCu particles were initially homogenously mixed in a melt mixer, and the resulting composite material was subsequentlypassed through a crusher and converted into a granular form suitable for filament extrusion. The prepared granules were fed into the filament production system to obtain a preliminary filament, followed by a pelletization process. A second extrusion/drawing stage was then performed to complete the production of the final composite filament. The produced filaments had a nominal diameter of 1.75mm, with a target diameter tolerance of ±5%. The continuity, surface morphology, and geometrical characteristics of the final filaments were examined using macro-scale imaging, optical microscopy, and stereomicroscopy. Optical microscopy enabled the evaluation of the distribution of AgCu particles within the PLA matrix and the morphological characteristics of the filament. Macro-scale images were used to assess the continuity and surface uniformity of the filaments produced during the filament manufacturing process, as well as morphological variations along the filament diameter. The two-stage processing cycle reduced the distributional variations that could occur after the first extrusion and enabled a more homogeneous distribution of AgCu particles within the PLA matrix. The results demonstrate that PLA composites containing 2 wt.% AgCu can be successfully produced as FDM filaments with a nominal diameter of 1.75 mm, and that optical microscopy and macro-scale morphological examinations provide effective methods for evaluating the quality of the produced
filaments. The developed silver-coated copper-reinforced, biodegradable PLA-based filaments provide
a new basis for their utilization in FDM-based additive manufacturing applications.