A comprehensive investigation of the effect of thixoforging on WC content-dependent microstructural, mechanical, and tribological behavior of AA2024–WC composites
JOURNAL OF CENTRAL SOUTH UNIVERSITY, sa.-, ss.1-30, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Basım Tarihi: 2026
- Doi Numarası: 10.1007/s11771-026-6462-4
- Dergi Adı: JOURNAL OF CENTRAL SOUTH UNIVERSITY
- Derginin Tarandığı İndeksler: Scopus, Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest), Aerospace Database, Science Citation Index Expanded (SCI-EXPANDED), Compendex, INSPEC
- Sayfa Sayıları: ss.1-30
- Karadeniz Teknik Üniversitesi Adresli: Evet
Özet
AA2024/WC composites containing 5 wt.%–15 wt.% WC were fabricated via powder metallurgy and subsequently subjected to semi-solid thixoforging to investigate the effect of thixoforging on WC content-dependent densification, microstructural evolution, and mechanical–tribological behavior. The results revealed that increasing WC content reduced the relative density of as-sintered composites, whereas thixoforging significantly enhanced densification in all compositions by reducing porosity and promoting a more compact and refined microstructure. This processing-dependent response led to notable improvements in mechanical properties, with the highest hardness (156 HB) and tensile strength (439 MPa) obtained at 10 wt.% WC. Tribological performance was also markedly improved after thixoforging, with the lowest wear rate of 1.1×10⁻⁴ mm³/N∙m achieved at 15 wt.% WC, accompanied by a reduction in friction coefficient. The findings demonstrate that thixoforging is an effective post-processing strategy for overcoming densification limitations in powder metallurgy composites and for tailoring microstructure-driven mechanical and tribological performance in AA2024-based systems.