Properties of foam concrete containing phase change material impregnated pumice


Kam E., Yaraş A., Ustaoğlu A., HEKİMOĞLU G., SARI A., Erdoğmuş E., ...More

Construction and Building Materials, vol.446, 2024 (SCI-Expanded) identifier

  • Publication Type: Article / Article
  • Volume: 446
  • Publication Date: 2024
  • Doi Number: 10.1016/j.conbuildmat.2024.137915
  • Journal Name: Construction and Building Materials
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, CAB Abstracts, Communication Abstracts, Compendex, INSPEC, Metadex, Veterinary Science Database, Civil Engineering Abstracts
  • Keywords: Energy efficient buildings, Foam concrete, Phase change materials, Pumice, Renewable energy, Smart and sustainable urbanization
  • Karadeniz Technical University Affiliated: Yes

Abstract

Energy consumption rises as a result of numerous electrical devices used to maintain thermal comfort of interior building areas. Using building materials with low thermal conductivity and density as well as an effective thermal energy storage plan can help to mitigate this. In order to enhance thermal performance of building, phase change material (PCM) was incorporated to foam concrete mixture in this study. Capric acid (CA)-palmitic acid (PA) eutectic mixture was prepared and impregnated with pumice (50 % by weight), a light and porous material. DSC results indicated that pumice/CA-PA composite exhibited a melting temperature of 22.84˚C and a freezing temperature of 20.85˚C, with corresponding enthalpy values for melting and freezing determined to be 85.4 J/g and 85.1 J/g, respectively. TGA analyses demonstrated that operational temperature of pumice/CA-PA composite was significantly below its thermal degradation temperature (194˚C). The prepared pumice/CA-PA composites were replaced with silica aggregate at different rates and incorporated in foam concrete mixture. Porosity and water absorption values rose as pumice/PCM content increased, yet there was a 7.2–41.1 % drop in dry unit weight when compared to reference. Compressive strength also showed a linear decrease and the lowest compressive strength value was recorded as 4.71 MPa in the presence of 40 % pumice/PCM. Thermal conductivity dropped from 0.487 W/mK to 0.167 W/mK, suggesting that foam concrete samples that were produced are all suitable as insulation materials. In peak solar radiation hours, PCM-impregnated pumice foam concrete (PFC) provided about 11.8 % and 8.72 % surface and room center temperatures compared to that of the reference in maximum case. PFC with PCM provided 6.54 % warmer surface temperature in cold weather. PFC-PCM can provide a cooler indoor temperature during peak temperature hours. Therefore, it may have a great potential to decrease the cooling load of a building.