Öğr. Gör. Dr. ÖZLEM CANPOLAT

Yayın Ağı

Makaleler 7

1. Effect of Milling Time and Multi-walled Carbon Nanotube Content on Structure and Properties of an Al-Cu-Mg/MWCNT Composite Produced by Different Dispersion Methods and Powder Metallurgy

Özer H., VAROL T., CANPOLAT Ö.

Journal of Materials Engineering and Performance , cilt.34, sa.21, ss.25227-25238, 2025 (SCI-Expanded, Scopus)

2. Effect of HA ratio on the morphology and characteristics of Ti-HA composite coatings on Ti6Al4V-ELI synthesized via mechanical milling

Canpolat Ö., Çanakçı A., Gültekin G.

TRIBOLOGY-MATERIALS SURFACES & INTERFACES , sa.4, ss.245-255, 2024 (ESCI) Sürdürülebilir Kalkınma

3. 316L/HA Kompozitlerinin Farklı Fizyolojik Sıvılardaki Korozyon ve Biyoaktivite Davranışının Araştırılması

Canpolat Ö., Çanakçı A.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.27, sa.5, ss.1913-1921, 2024 (ESCI)

4. Effect of Milling Time and Process Control Agent on Microstructure and Mechanical Properties of AA2024-2 wt.% Cu Metal–Metal Composites Produced by Mechanical Alloying

Gültekin G., ÇANAKÇI A., CANPOLAT Ö.

Metallography, Microstructure, and Analysis , cilt.12, sa.3, ss.444-454, 2023 (ESCI)

5. SS316L/Al2O3 functionally graded material for potential biomedical applications

Canpolat Ö., Çanakçı A., Erdemir F.

Materials Chemistry and Physics , cilt.293, 2023 (SCI-Expanded, Scopus)

6. Evaluation of microstructure, mechanical, and corrosion properties of SS316L/Al2O3 composites produced by hot pressing

CANPOLAT Ö., ÇANAKÇI A., ERDEMİR F.

MATERIALS CHEMISTRY AND PHYSICS , cilt.280, 2022 (SCI-Expanded, Scopus)

7. Evaluation of K 2 La 2 Ti 3 O 10 -based coatings for Daphnia magna acute toxicity test of methylene blue degradation in water

Kursun G., Pala A., Canpolat Ö., Celik E.

Journal of the Australian Ceramic Society , cilt.55, sa.1, ss.289-296, 2019 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 17

1. Characterization of AA2024/CNT Nanocomposites as a Function of Milling Time and CNT Content

Özer H., Canpolat Ö., Varol T.

8 th International Conference on Engineering Technologies ICENTE 2024, Konya, Türkiye, 21 - 23 Kasım 2024, ss.159-162, (Tam Metin Bildiri)

2. Production of SS316L/HA Functionally Graded Material For Biomedical Applications Using Powder Metallurgy

Canpolat Ö., Çanakçı A.

5th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem 2022), Ankara, Türkiye, 23 - 25 Kasım 2022, ss.563-568, (Tam Metin Bildiri)

3. Corrosion Behavior of SS316L/ Al2O3 Composites Produced by Powder Metallurgy Technique

Canpolat Ö., Çanakçı A., Erdemir F., Gedik Gültekin G.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.165, (Özet Bildiri)

4. The effect of mechanical milling parameters on the properties of AA2024- 2 wt.% Cu composites produced by powder metallurgy

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.167, (Özet Bildiri)

5. Investigation of Microstructure and Mechanical Properties of SS316L/ Al2O3 Composites

Canpolat Ö., Çanakçı A., Erdemir F., Gedik Gültekin G.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.199, (Özet Bildiri)

6. Effect of Proccess Control Agents and Milling Time on the Powder Properties of AA2024/Cu Metal Matrix Composites

Gedik Gültekin G., Çanakçı A., Özkaya S., Canpolat Ö.

V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, ss.166, (Özet Bildiri)

7. Fabrication of SS316L–Al2O3 Composites and Investigation of Their Mechanical and Corrosion Behavior

Canpolat Ö., Çanakçı A.

IES’20 International Engineering Symposium |, İzmir, Türkiye, 5 - 06 Aralık 2020, ss.119-120, (Özet Bildiri)

8. Photocatalytic Activity Performance of K2La2Ti3O10 Thin Films For Degradation of Remazol Marine Textile Dyes

Kurşun G., Pala A., Canpolat Ö., Çelik E.

2nd IWA Regional Symposium on Water, Wastewater and Environment of the World’s Water Resources, İzmir, Türkiye, 22 - 24 Mart 2017, ss.228, (Özet Bildiri)

9. Sm,Nd,Dy ve Gd ile Katkılandırılmış K2La2Ti3O10 Malzemeler Kullanarak Metilen Mavisi İçeren Suların Fotokatalitik Aktivitesi Ve Akut Toksistesinin Belirlenmesi

KURŞUN G., CANPOLAT Ö., PALA A., ÇELİK E.

9.Seramik Kongresi, Afyon, Türkiye, 26 - 28 Kasım 2015, ss.70, (Özet Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

BM Sürdürülebilir Kalkınma Amaçları

Öğr. Gör. Dr. ÖZLEM CANPOLAT

Yayınlar & Eserler

1. Effect of Milling Time and Multi-walled Carbon Nanotube Content on Structure and Properties of an Al-Cu-Mg/MWCNT Composite Produced by Different Dispersion Methods and Powder Metallurgy

2. Effect of HA ratio on the morphology and characteristics of Ti-HA composite coatings on Ti6Al4V-ELI synthesized via mechanical milling

3. 316L/HA Kompozitlerinin Farklı Fizyolojik Sıvılardaki Korozyon ve Biyoaktivite Davranışının Araştırılması

4. Effect of Milling Time and Process Control Agent on Microstructure and Mechanical Properties of AA2024-2 wt.% Cu Metal–Metal Composites Produced by Mechanical Alloying

5. SS316L/Al2O3 functionally graded material for potential biomedical applications

6. Evaluation of microstructure, mechanical, and corrosion properties of SS316L/Al2O3 composites produced by hot pressing

7. Evaluation of K 2 La 2 Ti 3 O 10 -based coatings for Daphnia magna acute toxicity test of methylene blue degradation in water

1. Characterization of AA2024/CNT Nanocomposites as a Function of Milling Time and CNT Content

2. Production of SS316L/HA Functionally Graded Material For Biomedical Applications Using Powder Metallurgy

3. Corrosion Behavior of SS316L/ Al2O3 Composites Produced by Powder Metallurgy Technique

4. The effect of mechanical milling parameters on the properties of AA2024- 2 wt.% Cu composites produced by powder metallurgy

5. Investigation of Microstructure and Mechanical Properties of SS316L/ Al2O3 Composites

6. Effect of Proccess Control Agents and Milling Time on the Powder Properties of AA2024/Cu Metal Matrix Composites

7. Fabrication of SS316L–Al2O3 Composites and Investigation of Their Mechanical and Corrosion Behavior

8. Photocatalytic Activity Performance of K2La2Ti3O10 Thin Films For Degradation of Remazol Marine Textile Dyes

9. Sm,Nd,Dy ve Gd ile Katkılandırılmış K2La2Ti3O10 Malzemeler Kullanarak Metilen Mavisi İçeren Suların Fotokatalitik Aktivitesi Ve Akut Toksistesinin Belirlenmesi

10. Nanocoating Thin Film Applications on Water Treatment

11. Production Chracterization and Photocatalytical Kinetics of Sm and Dy doped K2La2Ti3O10 Semiconducting Thin Films

12. A Comparison Study of Photocatalytic Effects of Pure K2La2Ti3O10 with Sm and Nd Doped K2La2Ti3O10 Films

13. Photocatalytic Degradation of Cyanide in Wastewater by Using Newly Developed Nano Thin Film

14. New Generation K2La2Ti3O10 Semiconducting Thin Films and Their Industrial Application

15. New Generation Photocatalytic K2La2Ti3O10 Semiconducting Thin Films and Their Industrial Application

16. Sol-jel Yöntemi ile K2La2Ti3O10 Tozların Üretimi, Karakterizasyonu ve Fotokatalitik Kinetiği

17. Nadir Toprak Elementi Katkılı K2La2Ti3O10 Kullanarak Atık Suların Fotokatalitik Oksidasyon Yöntemiyle Temizlenmesi

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje