Publications

Articles

Optimization of laser powder bed fusion parameters for Ti-Ag parts from silver-coated Ti powders via response surface methodology

Akçay S. B., Varol T., Aksa H. C., Beder M., Güler O., Erdemir F., et al.
RAPID PROTOTYPING JOURNAL, vol.32, no.3, pp.665-687, 2026 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

Taguchi optimization of electrolytic Cu powders recycled from scrap Cu plates and properties of recycled Cu compacts processed by hot-pressing

Kocaman M., Varol T., Çuvalcı H., Akçay S. B., Güler O., Beder M., et al.
Journal of Materials Research and Technology, vol.40, pp.3873-3885, 2026 (SCI-Expanded, Scopus) Sustainable Development identifier

Effect of mechanical milling parameters on the properties of electrolytic pure copper powders and hot pressed billets fabricated from recycled copper wastes

AKÇAY S. B., ÇUVALCI O., VAROL T., ÇUVALCI H., KOCAMAN M., ALVER Ü., et al.
MATERIALS CHEMISTRY AND PHYSICS, vol.346, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

Fabrication of mechanical durable novolac matrix composites with recycled and cost-effective candle-soot nano particles

Kocaman M., Güler O., Çuvalcı H., Akçay S. B.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, vol.44, no.21-22, pp.2063-2078, 2025 (SCI-Expanded, Scopus) identifier identifier

Evolution of Morphology, Particle Size and Oxidation Resistance of Recycled Ti-6Al-4V Powders Prepared by Planetary Ball Milling

VAROL T., Ömür F. D., AKÇAY S. B., GÜLER O., ERDEMİR F.
Arabian Journal for Science and Engineering, vol.50, no.12, pp.9123-9140, 2025 (SCI-Expanded, Scopus) identifier identifier

Enhancingmechanicalpropertiesand tribologicalperformancethroughboroncarbidehybridizationin Novolacmatrixgraphitecompositesunderdry slidingcondition

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T.
TRIBOLOGY INTERNATIONAL, vol.199, 2024 (SCI-Expanded, Scopus) identifier identifier

The Effect of Heat Treatment on the Mechanical Properties and Oxidation Resistance of AlSi10Mg Alloy

Beder M., Akçay S. B., Varol T., Çuvalcı H.
Arabian Journal for Science and Engineering, vol.49, no.11, pp.15335-15346, 2024 (SCI-Expanded, Scopus) identifier

Impact of high Al<sub>2</sub>O<sub>3</sub> content on the microstructure, mechanical properties, and wear behavior Al-Cu-Mg/Al<sub>2</sub>O<sub>3</sub> composites prepared by mechanical milling

Beder M., Varol T., Akçay S. B.
CERAMICS INTERNATIONAL, vol.50, no.20, pp.38610-38631, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

Synthesize and characterization of silver coated Ti powders from waste titanium chips by mechanical milling assisted electroless plating method

Akçay S. B., Varol T., Güler O., Alver Ü.
Materials Chemistry and Physics, vol.323, 2024 (SCI-Expanded, Scopus) identifier identifier

Effect of the Ag coated ABS granules and hot-pressing temperature on the microstructure evolution and properties of novel Ag/ABS composites

Akçay S. B., Kocaman M., Güler O., Ömür F. D., Varol T., Aslan M., et al.
Surfaces and Interfaces, vol.51, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

Prediction of effect of fabrication parameters on the properties of B4C ceramic particle reinforced AA2024 matrix nanocomposites using neural networks

Varol T., Çanakçı A., Özşahin Ş., Beder M., Akçay S. B.
MATERIALS TODAY COMMUNICATIONS, vol.39, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

The Effect of Milling Time and Hot-Pressing on the Structural Properties and Wear Behavior of CoCrFeMnNi High-Entropy Alloys Fabricated by Mechanical Alloying

Bulut C., Yıldız F., Varol T., Akçay S. B., Ergüder T. O.
High Temperature Corrosion of Materials, vol.101, no.2, pp.225-249, 2024 (Scopus) identifier identifier

Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys

Varol T., Aksa H. C., Yıldız F., Akçay S. B., Kaya G., Beder M.
Tribology International, vol.192, 2024 (SCI-Expanded, Scopus) identifier identifier

Surface modification for improving interfacial, mechanical and thermal performance characteristics in epoxy composites: Electroless nickel enhancement of dendritic copper particle-reinforced epoxy

Akçay S. B., Kocaman M., Çelebi M., Güler O., Varol T.
Surface and Coatings Technology, vol.478, 2024 (SCI-Expanded, Scopus) identifier identifier

Aşınma ve Korozyona Dirençli Çelik Yüzeyler Oluşturmak Için Kullanılan Yüzey İşlemleri Üzerine Bir Derleme

Yıldız U. T., Varol T., Pürçek G., Akçay S. B.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, vol.27, no.1, 2024 (ESCI, TRDizin) Sustainable Development identifier identifier

The effect of recycled zinc powder content on the properties of novel novolac matrix hybrid composites

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T., Çuvalcı O.
TRIBOLOGY INTERNATIONAL, vol.188, 2023 (SCI-Expanded, Scopus) identifier identifier

Effect of ball mill time and wet pre-milling on the fabrication of Ti powders by recycling Ti machining chips by planetary milling

Çuvalcı O., Varol T., Akçay S. B., Güler O., Çanakçı A.
POWDER TECHNOLOGY, vol.426, 2023 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

Structure and tribological properties of composites based on a Novolac matrix with Ni-P electrolytic coating

Güler O., Kocaman M., Akçay S. B., Çuvalcı H., Varol T.
SURFACE & COATINGS TECHNOLOGY, vol.451, 2022 (SCI-Expanded, Scopus) identifier identifier

The evolution of microstructure and properties of Cu-Cr alloys synthesized via flake powder metallurgy assisted by mechanical alloying and hot pressing

VAROL T., GÜLER O., AKÇAY S. B., ÇOLAK H.
MATERIALS TODAY COMMUNICATIONS, vol.33, 2022 (SCI-Expanded, Scopus) identifier identifier

Effects of fabrication parameters and post-processing treatments on the mechanical and tribological behavior of surface-enhanced copper based materials by selective laser melting

Aksa H. C., Hacısalihoğlu İ., Yıldız F., VAROL T., GÜLER O., Kaya G., et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.304, 2022 (SCI-Expanded, Scopus) identifier identifier

Enhancement of electrical and thermal conductivity of low-cost novel Cu-Ag alloys prepared by hot-pressing and electroless plating from recycled electrolytic copper powders

VAROL T., GÜLER O., AKÇAY S. B., Çuvalcı O.
MATERIALS CHEMISTRY AND PHYSICS, 2022 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

Novel advanced copper-silver materials produced from recycled dendritic copper powders using electroless coating and hot pressing

Varol T., Güler O., Akçay S. B., Aksa H. C.
Powder Metallurgy, vol.65, no.5, pp.390-402, 2022 (SCI-Expanded, Scopus) identifier identifier

Papers Published in Refereed Scientific Meetings

Investigation of the effects of hot-pressing temperature on Ti-B4C composite materials produced with 10% B4C reinforcement

AKÇAY S. B., VAROL T., ÇUVALCI O., KOCAMAN M., Atik G.
Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Turkey, 10 - 11 November 2024, pp.240-246, (Full Text)

Books & Book Chapters

Materials for Lightweight Constructions

Varol T. (Editor)
CRC, New York , Florida, 2022 Sustainable Development

Additive Manufacturing of Non-ferrous Metals

Varol T., Güler O., Yıldız F., Kumar S. S.
in: Innovations in Additive Manufacturing, M. Adam Khan,J. T. Winowlin Jappes, Editor, Springer Nature, Berlin, pp.91-120, 2022