Prof. TEMEL VAROL


Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği

Üretim Metalurjisi


WoS Research Areas: Engineering Mechanical, Engineering Computing & Technology (Eng), Materials Science Characterization & Testing, Materials Science Coatings & Films, Materials Science Composites, Engineering, Materials Science


Avesis Research Areas: Mechanical Engineering, Construction and Manufacturing, Tribology, Metallurgical and Materials Engineering, Material science and engineering, Composites, Plating, Production Metallurgy, Powder Metallurgy, Engineering and Technology

Email: tvarol@ktu.edu.tr
Office Phone: +90 462 377 Extension: 3642
Web: https://avesis.ktu.edu.tr/tvarol
Office: Metalurji ve Malzeme Mühendisliği Bölümü
Address: Karadeniz Teknik Üniversitesi / Metalurji ve Malzeme Mühendisliği Bölümü

Metrics

Publication

283

Citation (WoS)

2169

H-Index (WoS)

35

Citation (Scopus)

2481

H-Index (Scopus)

37

H-Index (Scholar)

40

Citiation (TrDizin)

5

H-Index (TrDizin)

1

Project

40

Intellectual Property

3

Thesis Advisory

3

Open Access

18
UN Sustainable Development Goals

Biography

Temel Varol 1980 yılında Trabzon'da doğdu. İlkokul eğitimini Değirmendere'de bulunan Atatürk İlkolunda, Ortaokul eğitimini ise Esentepe Mahallesindeki Atatürk Ortaokulunda aldı. Lise eğitimini Trabzon Lisesinde tamamladıktan sonra Atatürk Üniversitesi Makine Mühendisliğinde lisans eğitimine başladı. 2002 yılında Makine Mühendisi ünvanı aldıktan sonra 2003-2006 yılları arasında İstanbul'da çeşitli firmalarda doğalgaz projelendirme ve imalat mühendisi olarak çalıştı. 2006 yılında Tokat 48. Piyade Eğitim Alayında kısa dönem asker olarak askerlik hizmetini tamamladı. 2006-2009 yılları arasında ticari faaliyetler yürüttü. 2010 yılında Karadeniz Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve Malzeme Mühendisliği Anabilim Dalında yüksek lisans Eğitimine başladı ve aynı yıl Karadeniz Teknik Üniversitesi Fen Bilimleri Enstitüsü 50/d kadrosuna Araştırma Görevlisi olarak atandı. 2012 yılında Metalurji ve Malzeme Mühendisliği Ana Bilim Dalında yüksek lisans çalışmalarını tamamlayarak Makine Mühendisliği Anabilim dalında doktora eğitimine başladı. 2016 yılında doktora eğitimini tamamlayan Temel Varol, aynı yıl Karadeniz Teknik Üniversitesi-Metalurji ve Malzeme Mühendisliği bölümünde Yrd.Doç.Dr. olarak göreve başladı ve 2018-2023 yılları arasında Doçent olarak İdari ve akademik çalışmalarını sürdürdü. 2023 yılında Profesör kadrosuna atanan Dr. Varol evli ve 3 çocuk babasıdır. İyi derecede İngilizce bilmektedir.

Education Information

2012 - 2016

2012 - 2016

Doctorate

Karadeniz Technical University, Fen Bilimleri Enstitüsü, Makine Mühendisliği, Turkey

2010 - 2012

2010 - 2012

Postgraduate

Karadeniz Technical University, Fen Bilimleri Enstitüsü, Metalurji Ve Malzeme Mühendisliği, Turkey

1998 - 2002

1998 - 2002

Undergraduate

Ataturk University, Mühendislik Fakültesi, Makine Mühendisliği, Turkey

Dissertations

2016

2016

Doctorate

Nano Partikül Takviyeli Bakır Esaslı Fonksiyonel Derecelendirilmiş Elektrik Kontak Malzemelerinin Üretimi ve Karakterizasyonu

Karadeniz Technical University, Fen Bilimleri Enstitüsü, Makine Mühendisliği / Malzeme

2012

2012

Postgraduate

AA2024 Matrisli B4C Parçacık Takviyeli Metal Matrisli Kompozitlerin Toz Metalurjisi Yöntemiyle Üretimi ve Özelliklerinin İncelenmesi

Karadeniz Technical University, Fen Bilimleri Enstitüsü, Metalurji Ve Malzeme Mühendisliği

Foreign Languages

B2 Upper Intermediate

B2 Upper Intermediate

English

Certificates, Courses and Trainings

2022

2022

Teknokentlerde Yer Alan/Almak İsteyen Akademisyenlere Yönelik Ar-Ge Projesi Hazırlama Eğitimi

Entrepreneurship

Karadeniz Teknik Üniversitesi

2018

2018

Mühendislik ve Teknolojik Bilimlerde Uygulamalı Proje Yazma Eğitimi

Project Management

Tübitak 2237-B / Karadeniz Teknik Üniversitesi

Research Areas

Mechanical Engineering

Construction and Manufacturing

Tribology

Metallurgical and Materials Engineering

Material science and engineering

Composites

Plating

Production Metallurgy

Powder Metallurgy

Engineering and Technology

Academic Titles / Tasks

2018 - 2018

2018 - 2018

Karadeniz Technical University, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği

2016 - 2018

2016 - 2018

Assistant Professor

Karadeniz Technical University, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği

Courses

Postgraduate

Postgraduate

Demirdışı Metal ve Alaşımları

Undergraduate

Undergraduate

Statik-Mukavemet

Postgraduate

Postgraduate

Seramik Matrisli Kompozitler

Undergraduate

Undergraduate

Mühendislik Çizimi

Undergraduate

Undergraduate

Tasarım ve Malzeme Seçimi

Undergraduate

Undergraduate

Taşınım Olayları

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Refereed Congress / Symposium Publications in Proceedings

2024

2024

Investigation of the effects of hot-pressing temperature on Ti-B4C composite materials produced with 10% B4C reinforcement

AKÇAY S. B., VAROL T., ÇUVALCI O., KOCAMAN M., Atik G.

Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Turkey, 10 - 11 November 2024, pp.240-246

2024

2024

Evaluation of Wear Behavior of Al2024 Alloy Produced via Powder Metallurgy Using the Taguchi Method

AKÇAY S. B., VAROL T., ERDEMİR F., KOCAMAN M.

Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Turkey, 10 - 11 November 2024, pp.232-239

2022

2022

Effect of Ni-P Coating on The Microstructure of Copper-Based Materials Produced by Hot-Pressing

AKÇAY S. B., GÜLER O., VAROL T.

3rd International Conference on Applied Engineering and Natural Sciences, Turkey, 20 - 23 July 2022, pp.1351-1354

2022

2022

EFFECT OF THE ELECTROLESS NI-P COATING ON THE PROPERTIES OF CU PARTICLES

AKÇAY S. B., GÜLER O., VAROL T.

3rd International Conference on Applied Engineering and Natural Sciences, Turkey, 20 - 23 July 2022, pp.1447-1451

2022

2022

THE EFFECT OF GRAPHITE AMOUNT ON THE HARDNESS AND ELECTRICAL CONDUCTIVITY PROPERTIES OF COPPER-GRAPHITE COMPOSITES

VAROL T., AKÇAY S. B., Çolak H.

International Scientific Research Congress Dedicated to the 30th Anniversary of Bakur Eurasia University, Azerbaijan, 27 April 2022, pp.1558-1565

2022

2022

EFFECT OF MECHANICAL MILLING TIME ON THE PROPERTIES OF COPPER-BASED MATERIALS

VAROL T., AKÇAY S. B., Çolak H.

International Scientific Research Congress Dedicated to the 30th Anniversary of Bakur Eurasia University, Azerbaijan, 27 April 2022, pp.1549-1557

2022

2022

The Effect of Electroless Coating and Ball Milling on the Properties of Cu/Ag Compact Materials

Başar E. Y., VAROL T., AKÇAY S. B., GÜLER O.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 May 2022, pp.2366-2370

2022

2022

The Effect of the Ball Milling Time on the Particle Size and Morphology of Dendritic Copper Particles

Uludağ A., VAROL T., AKÇAY S. B.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 May 2022, pp.2361-2365

2022

2022

Effect of Mechanical Milling and Electroless Silver Coating on the Oxidation Resistance of Copper Powder Produced by Electrolysis

Sevinç M., VAROL T., AKÇAY S. B., GÜLER O.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 May 2022, pp.2356-2360

2021

2021

Mechanical and Tribological Properties of SLMed Silver Coated Copper Powder Material

Kaya G., Güler O., Aksa H. C., Akçay S. B., Hacısalihoğlu İ., Varol T., et al.

1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Turkey, 15 - 17 December 2021, pp.682-690

2021

2021

Mechanical and Tribological Properties of SLMed Silver Coated Copper Powder Material

Kaya G., Güler O., Aksa H. C., Akçay S. B., Hacısalihoğlu İ., Varol T., et al.

1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Turkey, 15 - 17 December 2021, pp.682-690

2021

2021

THE SYNTHESIS OF COPPER-CHROMIUM ALLOY PARTICLES BY MECHANICAL ALLOYING METHOD

Çolak H., Varol T., Güler O., Akçay S. B., Aksa H. C.

3rd INTERNATIONAL GOBEKLITEPE APPLIED SCIENCES CONGRESS , Şanlıurfa, Turkey, 1 - 03 October 2021, pp.162-167

2021

2021

EFFECT OF MECHANICAL ALLOYING TIME ON ELECTRICAL CONDUCTIVITY AND HARDNESS OF COPPER-CHROMIUM ALLOYS

Çolak H., Varol T., Güler O., Akçay S. B., Aksa H. C.

3rd INTERNATIONAL GOBEKLITEPE APPLIED SCIENCES CONGRESS, Şanlıurfa, Turkey, 1 - 03 October 2021, pp.168-175

2021

2021

THE SYNTHESIS OF COPPER-CHROMIUM ALLOY PARTICLES BY MECHANICAL ALLOYING METHOD

Çolak H., Varol T., Güler O., Akçay S. B., Aksa H. C.

3rd INTERNATIONAL GOBEKLITEPE APPLIED SCIENCES CONGRESS, Şanlıurfa, Turkey, 1 - 03 October 2021

2021

2021

A Revıew on The Coatıng Methods Applıed for Steel Surface

Varol T., Pürçek G., Yıldız U. T.

5. Internatıonal Asıan Congress on Contemporary Scıences, Nakhchivan, Azerbaijan, 1 - 02 June 2021, pp.537-555

2020

2020

CHARACTERIZATION OF SILVER PLATED COPPER BASED MATERIALS OBTAINED BY HOT PRESSING METHOD

Varol T., Aksa H. C., Güler O.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.70-73

2020

2020

The Effect of pH on the Plating Layer of Silver Plated CopperPowders by Electroless Plating Method

VAROL T., AKÇAY S. B., GÜLER O., ALVER Ü.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.60-64

2020

2020

CHARACTERIZATION OF CU-AG ALLOYS PRODUCED BY POWDER METALLURGY METHOD

Varol T., Aksa H. C., Güler O., Alver Ü.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.74-77

2020

2020

The Effect of Reducing Agent Amount on the Properties ofElectroless Silver Plated Copper Powders

VAROL T., AKÇAY S. B., GÜLER O.

5. International Conference on Material Science and Technology (IMSTEC 2020), 16 - 18 October 2020, pp.65-69

2019

2019

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

Güler O., Varol T., Alver Ü., Akçay S. B.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Turkey, 27 December 2019, pp.198-207

2019

2019

THE EFFECT OF MECHANICAL MILLING TIME AND SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Turkey, 27 - 29 December 2019, pp.219-228

2019

2019

THE EFFECT OF ALUMINA CONTENT AND ELECTROLESS SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Turkey, 27 - 29 December 2019, pp.208-2018

2019

2019

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

GÜLER O., VAROL T., ALVER Ü., Akçay S. B.

2. Uluslararası 19 Mayıs Yenilikçi Bilimsel Yaklaşımlar Kongresi Uygulamalı Bilimler, 27 - 29 December 2019

2019

2019

THE EFFECT OF ALUMINA CONTENT AND ELECTROLESS SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Turkey, 27 - 29 December 2019, pp.208-218

2019

2019

THE EFFECT OF MECHANICAL MILLING TIME AND SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Turkey, 27 - 29 December 2019, pp.219-228

2019

2019

PRODUCTION OF CU-AG-CR COMPOSITES FROM THE LAYERED METALLICPOWDERS

Güler O., Varol T., Alver Ü., Akçay S. B.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Turkey, 27 - 29 December 2019, pp.190-197

2019

2019

WEAR PROPERTIES OF CU-AG-NI COMPOSITES PRODUCED BY ELECTROLESS COATING AND HOT-PRESSING

GÜLER O., VAROL T., ALVER Ü., AKÇAY S. B.

2. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, Samsun, Turkey, 27 - 29 December 2019, pp.198-207

2019

2019

Oxidation Resistance of Silver Coated Copper Powders with Different Morphologies

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 19 - 21 September 2019, vol.25, pp.340-345

2019

2019

Fabrication of Cu-Ag-Ni Layered Bulk Samples by Electroless Plating and Powder Metallurgy Method

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 19 - 21 September 2019, vol.25, pp.346-352

2019

2019

The Effect of Milling Time On the Coating Thickness of Silver Coated Copper Particles

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Turkey, 13 - 15 June 2019, pp.195

2019

2019

The Investigation of the Mechanical and Physical Properties of Silver Coated Copper Fabricated by Electroless Coating

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Turkey, 13 - 15 June 2019, pp.197

2018

2018

The Effect of Silver Coating on the Corrosion Behavior of Copper Based Materials

Alver Ü., Güler O., Varol T., Aslan M.

19th International Metallurgy & Materials Congress (IMMC), İstanbul, Turkey, 25 - 27 October 2018, pp.1121-1123

2018

2018

Microstructure and Mechanical Properties of Al2024-SiC Nanocomposites

Karabacak A. H., Çanakçı A., Varol T., Erdemir F.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Turkey, 27 - 29 June 2018, pp.788-797 Creative Commons License

2018

2018

Consodilation and Investigation of Properties of Hydroxyapatite-316L Stainless Steel Composites

Karabacak A. H., Özkaya S., Çanakçı A., Varol T., Çelebi M., Erdemir F.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Turkey, 27 - 29 June 2018, pp.828-834 Creative Commons License

2018

2018

The Effect of Ball Milling Time on the Properties of Silver Coated Copper Materials Produced by Powder Metallurgy

GÜLER O., ERDEMİR F., VAROL T., ALVER Ü.

19th International Metallurgy and Materials Congress (IMMC), İstanbul, Turkey, 25 - 27 October 2018, pp.176-178

2018

2018

PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Turkey, 25 - 27 October 2018, pp.5-7

2018

2018

Production of Al2024 Foams by Space Holder Technique

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

International Metallurgy and Materials Congress, 25 - 27 October 2018, pp.236-239

2018

2018

Consolidation and Investigation of Properties of Hydroxyapatit-316L Stainless Steel Composites

ÖZKAYA S., ÇANAKÇI A., VAROL T., KARABACAK A. H., ÇELEBİ M., ERDEMİR F.

1. International Technological Sciences and Design Symposium, Giresun, Turkey, 27 June - 29 July 2018, pp.828-834

2017

2017

The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Turkey, 19 - 22 October 2017, pp.1752-1756

2017

2017

Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying

KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

8th International Advanced Technologies Symposium, Elazığ, Turkey, 18 - 22 October 2017, pp.1299-1304

2017

2017

A Review on The Powder Coating with Mechanical Milling

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.228-232

2017

2017

Application of Artificial Neural Network for Prediction of Coating Thickness in Fe-Al Coatings

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 October 2017, pp.210-214

2017

2017

Microstructure and Some Mechanical Properties of Al2024–B4C Composites Fabricated by Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., VAROL T., YALÇIN E. D.

International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 21 - 23 September 2017, pp.1314-1321

2017

2017

Synthesize and Characterızation of SiC Nanoparticles by Mechanical Milling Technique

VAROL T.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.205-209

2017

2017

Fabrication of AL2O3 Nano-Powders by a Planetary Ball Milling Without Process Control Agent

VAROL T., ERDEMİR F., ÇANAKÇI A.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.233-236

2017

2017

Determining of the Effect of Heat Treatment Parameter on The Graın Sıze of AISI 316L Stainless Stell Using Taguchi Method

ERDEMİR F., ÇANAKÇI A., VAROL T., YALÇIN E. D.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.219-222

2017

2017

Prediction of the Effect of Matrix Size and Milling time on the Particle Size of Flake Al-Cu-Mg Alloy Particles Using Neural Networks

VAROL T., ÖZŞAHİN Ş.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.237-241

2017

2017

Electrical Contact Materials

VAROL T., ÇANAKÇI A., ERDEMİR F., YALÇIN E. D.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.242-247

2017

2017

Prediction of the Effect of Matrix Size and Milling Time on the Particle Size of Flake Al-Cu-Mg Alloy Particles Using Neural Networks

VAROL T., ÖZŞAHİN Ş.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Turkey, 12 - 15 September 2017, pp.237-241

2017

2017

Determining of the effect of heat treatment parameter on the grain size of AISI 316L stainless steel using Taguchi method

ERDEMİR F., ÇANAKÇI A., VAROL T., YALÇIN E. D.

Uluslararası Gözenekli ve Toz Malzemeler Sempozyumu ve Sergisi, PPM 2017', Aydın, Turkey, 12 - 15 September 2017, pp.215-218

2017

2017

Mechanical Properties of ZA27/Graphene Nanocomposites Produced by Powder Metallurgy Method

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., VAROL T., ÇELEBİ M.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 June 2017, pp.371-374

2017

2017

Ceramic Foams

VAROL T., ÇANAKÇI A., ERDEMİR F., ÇELEBİ M., YALÇIN E. D.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosnia And Herzegovina, 28 - 30 June 2017, pp.370-380

2017

2017

A Review on the New Armour Ceramic Meterials

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosnia And Herzegovina, 28 - 30 June 2017, pp.381-385

2017

2017

Effects Of Alumina Nanoparticle Content On The Microstructure And Mechanical Properties Of ZA27/Al2O3 Nanocomposites Fabricated By Powder Metallurgy

ÇELEBİ M., ÇUVALCI H., ÇANAKÇI A., GÜLER O., VAROL T.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosnia And Herzegovina, 28 - 30 June 2017, pp.353-358

2017

2017

metal köpükler

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

IDEF 2017 13’xxüncü Uluslararası Savunma Sanayii Fuarı, 9 - 12 May 2017

2017

2017

Effect of Processing Parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.

Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 April 2017, pp.636-640

2017

2017

The ballistic performance of Functionally Graded Al2024/B4C Nanocomposites

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.650-656

2017

2017

Fonksiyonel Derecelendirilmiş Al2024/ B4C Nanokompozitlerinin Balistik Performansları

ERDEMİR F., ÖZKAYA S., VAROL T., ÇANAKÇI A., YALÇIN E. D.

2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Turkey, 6 - 08 April 2017, vol.2, pp.16-20

2017

2017

Effect of procecessing parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ERDEMİR F.

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.636-640

2017

2017

Metal Foams

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.641-649

2017

2017

Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., ÇELEBİ M., KESKİN Ö. Y., KARABACAK A. H.

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.636-640

2016

2016

Metallic Biomaterials Biocompatibity and Mechanical Properties

VAROL T., ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H.

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, pp.1102-1109

2016

2016

Effect of CNT Content on the Synthesis and Characterization of Copper CNT Composites Fabricated By Ball Milling

VAROL T., ÇANAKÇI A., ERDEMİR F.

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, pp.583-588

2016

2016

Metallic Biomaterials Biocompability and Mechanical Properties

VAROL T., ÇANAKÇI A., ÇUVALCI H., ÖZKAYA S.

16th International Materials Symposium, 12 - 16 October 2016, pp.1102-1109

2016

2016

Development of response surface methodology for optimization of process parameters on the formation of Fe-Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016, vol.1, no.591, pp.53-59

2016

2016

Metallic Biomaterials Biocompatability and mechanical properties

VAROL T., ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H.

16th International Materials Symposium, 12 - 14 October 2016

2016

2016

TRIBOLOGICAL PERFORMANCE UNDER DRY SLIDING CONDITIONS OF COPPER-GRAPHENE NANOCOMPOSITES

VAROL T., ÇANAKÇI A., ERDEMİR F.

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1761-1766

2016

2016

PROPERTIES OF SILICONE CARBIDE REINFORCED NANOCOMPOSITES PREPARED BY FLAKE POWDER METALLURGY

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16. Uluslararası Malzeme Sempozyumu (IMSP'2016), Denizli, Turkey, 12 - 14 October 2016, vol.1, pp.1346-1352

2016

2016

Metallic Biomaterials: Biocompatibility and Mechanical Properties

VAROL T., ÇANAKÇI A., ÖZKAYA S., ÇUVALCI H.

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1102-1109

2016

2016

Effect of CNT content on the synthesis and characterization of Copper-CNT composites fabricated by ball milling technique

VAROL T., ÇANAKÇI A., ERDEMİR F.

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.583-588 Creative Commons License

2016

2016

Metallic Biomaterials : Biocompatibility and Mechanical properties

VAROL T., CANAKCI A., OZKAYA S., ÇUVALCI H.

16 th International Materials Symposium IMSP' 2016, Denizli, Turkey, 12 - 14 October 2016, pp.1102-1109

2016

2016

Properties of Silicon Carbide Matrix Nanocomposites Prepared by Flake Powder Metallurgy Processing

VAROL T., ÇANAKÇI A., YALÇIN E. D., ÖZKAYA S.

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1346-1352

2016

2016

Arc erosion behavior of Cu-nanographite electrical contact materials

VAROL T., ÇANAKÇI A., ÖZTÜRK A.

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.271-277

2016

2016

Electrochemical Corrosion Study of Al2024/SiC Composites

ERDEMİR F., ÇANAKÇI A., VAROL T.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Turkey, 5 - 07 October 2016, pp.26-32

2016

2016

Mekanik Alaşımlamanın AlCuMg/B4C Nanokompozitlerinin Korozyon Davranışı Üzerine Etkisi

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Turkey, 5 - 07 October 2016, pp.526-530

2016

2016

Study on Microstructure and Wear Properties of B4C Nanoparticles reinforced ZA27 nanocomposites

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.

International Conference of Engineering and Natural Sciences, 24 - 28 May 2016, pp.2850-2853

2016

2016

Development of response surface methodology for optimization of process parameters on the formation of Fe-AL intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress (IMSEC2016), Adana, Turkey, 26 - 28 September 2016, pp.2025-2030

2016

2016

Tribological Behaviours of ZA27/Graphene nanocomposites

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., VAROL T.

3rd INTERNATIONAL CONFERENCE ON THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS, İzmir, Turkey, 1 - 03 September 2016, pp.48-49

2016

2016

WEAR INVESTIGATION OF Al2024/SiC COMPOSITES BY RESPONSE SURFACE METHODOLOGY

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

International Conference on Thermophysical and Mechanical Properties of Advanced Materials, İzmir, Turkey, 1 - 03 September 2016, pp.235-241

2016

2016

Wear İnvestigation of Al2024/SiC Composites by response surface Methodology

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

3rd INTERNATIONAL CONFERENCE ON THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS, İzmir, Turkey, 1 - 03 September 2016, pp.49-50

2016

2016

Corrosion Behavior of AlCuMg/B4C Nanocomposites Produced by Powder Metallurgy Method

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2846-2849

2016

2016

Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique

ÇANAKÇI A., ÖZKAYA S., VAROL T., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.361

2016

2016

Functionally Graded Materials

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.1643-1649

2016

2016

Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2850-2853

2016

2016

Study on Microstructure and Wear Properties of B4C nanoparticle reinforced ZA27 nanocomposites

YALÇIN E. D., ÇANAKÇI A., ÖZKAYA S., VAROL T.

International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.1

2016

2016

WEAR PROPERTIES OF ZA 27 ALLOY AND ITS COMPOSITES REINFORCED WITH B4C AND GRAPHENE NANOPARTICLES

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., VAROL T.

1st International Conference on Engeneering Technology and Applied Sciences, Afyon, Turkey, 21 - 22 April 2016, pp.1-3

2015

2015

THE EFFECT OF MILLING TIME ON MECHANICAL PROPERTIES OF ALCUMG-B4C NANOCOMPOSITES PRODUCED BY HIGH ENERGY MILLING

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 December 2015, pp.26-30

2015

2015

International Porous Powder Materials Symposium and Exhibition PPM2015

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S., YALÇIN E. D.

nternational Porous Powder Materials Symposium and Exhibition PPM2015 , 15 - 18 September 2015

2015

2015

EFFECT OF MECHANICAL ALLOYING ON MECHANICAL PROPERTIES OF AlCuMg-B4C NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.186-192

2015

2015

THE MICROSTRUCTURE OF NANO B4C PARTICLE REINFORCED Al-Cu-Mg ALLOY MATRIX NANOMPOSITES PRODUCED BY FLAKE POWDER METALLURGY METHOD

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.585-590

2015

2015

EFFECT OF B4C CONTENT AND MILLING TIME ON WEAR BEHAVIOUR OF MECHANICALLY ALLOYED AlCuMg NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.173-179

2015

2015

Prediction Model For Densification Behaviour of Powder Metallurgy Al Cu Mg B4C composites

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., İPEK H.

International Porous and Powder Materials Symposium and Exhibition, 15 - 18 September 2015

2015

2015

APPLICATION OF BACK-PROPAGATION NEURAL NETWORK TECHNIQUE TO PREDICTION OF THE ABRASIVE WEAR BEHAVIOR OF AL2014/B4C COMPOSİTE

ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş.

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.1-5

2015

2015

EFFECT OF B4C ADDITION ON WEAR BEHAVIOUR OF AlCuMg NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.16-19

2015

2015

WEAR BEHAVIOR OF AL2024/SIC COMPOSITES PRODUCED BY POWDER METALLURGY METHODS

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.11-15

2015

2015

Application of Back-Propagation Neural Network Technique to Prediction of the Abrasive Wear Behavior of Al2014/B4C Composite

ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş.

TURKEYTRIB'15, 1rst International Conference on Tribology,, İstanbul, Turkey, 7 - 09 October 2015, pp.1

2015

2015

AN INVESTIGATION ON WEAR BEHAVIOR OF CU–GRAPHITE NANOCOMPOSITES PREPARED BY FLAKE POWDER METALLURGY

VAROL T., ÇANAKÇI A.

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.6-10

2015

2015

MICROSTRUCTURAL CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/Sic COMPOSITES PRODUCED BY HOT PRESSING AND CONSOLIDATION

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.31-35

2015

2015

Prediction Model for Densification Behavior of Powder Metallurgy Al-Cu-Mg/B4C Composites

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., İPEK H.

International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.384-389

2015

2015

PRODUCTION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/SiC-B4C HYBRID COMPOSITES BY HOT PRESSING PROCESS

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.36-39

2015

2015

PREDICTION MODEL FOR DENSIFICATION BEHAVIOR OF POWDER METALLURGY Al-Cu-Mg/B4C COMPOSITES

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., İPEK H.

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.397-402

2014

2014

Fabrication of Functionally Graded Al 2024/B4C Composites By Powder Metallurgy

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.97-103

2014

2014

The Prediction of Properties of B4C Particle Reinforced Metal Matrix Composites Using Artificial Neural Networks

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş.

17th International Metallurgy and Materials Congress, İstanbul, Turkey, 11 - 13 September 2014, pp.451-458

2014

2014

The prediction of properties of B4C particle reinforced metal matrix composites using artificial neural networks

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş.

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.451-458

2014

2014

Production and characterization of bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

17th International Metallurgy and Materials Congress, İstanbul, Turkey, 11 - 13 September 2014, pp.207-213

2014

2014

Production and characterization of Bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.207-213 Creative Commons License

2014

2014

Synthesis And Characterization Of B4c Particles Reinforced Al-Cu-Mg Alloy Matrix Nanocomposite Powders By High Energy Mechanical Milling

ÖZKAYA S., ÇANAKÇI A., VAROL T.

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.459-463 Creative Commons License

2014

2014

The effect of the contact cycles on the microstructure and performance of electrical contact materials

ÇANAKÇI A., VAROL T., İPEK H., Amran S.

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.406-410

2014

2014

Processing of AA7075 powders from recycling chips by mechanical milling

ÇANAKÇI A., VAROL T.

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.18-19

2014

2014

Synthesis and characterizion of nanographite reinforced Cu matrix composite powders by high energy ball milling

VAROL T., ÇANAKÇI A.

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.26-27

2014

2014

The study on the production of Al7075-Al-SiC composites by the recycling chips

ÇANAKÇI A., VAROL T.

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.20-21

2014

2014

Effect of mechanical milling on the physical and mechanical properties of powder metallurgy Al2024-B4C composites

VAROL T., ÇANAKÇI A.

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.22-23

2014

2014

Analysis of the prediction of compressibility of powder metallurgy Al2024-B4C composites using artificial neural networks

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş.

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.24-25

2013

2013

Biyomalzemeler

ÇANAKÇI A., DALMIŞ R., VAROL T., ERDEMİR F., ÖZKAYA S.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.649-660 Creative Commons License

2013

2013

Mekanik alaşımlama yöntemi ile Al2024-B4C kompozit tozlarının üretimi ve karakterizasyonu

VAROL T., ÇANAKÇI A.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.781-788

2013

2013

Mekanik alaşımlama yöntemi ile CuSn10-B4C-grafit hibrit nanokompozit tozlarının üretimi

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.789-795

2013

2013

Effects Of Different Process Control Agent On Characteristics Of Mechanically Milled Al2024 Powders

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., VAROL T.

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.804-808 Creative Commons License

2013

2013

Fabrication Of Fe-Al Intermetallic Coatings Using Mechanical Milling Technique

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.809-813 Creative Commons License

2013

2013

Abrasive wear Behaviour of powder Metallurgy CuSn10-Graphite Metal Matrix Composites Produced by Powder Metallurgy

CANAKCI A., ÇUVALCI H., VAROL T., ERDEMIR F., OZKAYA S., YALCIN E. D.

The proceedings of the 1st International Porous and powder Materials Symposium and Exhibition PPM 2013, İzmir, Turkey, 3 - 06 September 2013, pp.58-62

2013

2013

Microstructure and characterization of B4C reinforced Al2024 alloy matrix composites produced by mechanical alloying technique

VAROL T., ÇANAKÇI A.

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.150-154

2013

2013

Artificial Neural Network Approach to Predict of Effect of Process Control Agent on the Microhardness of Al-Al2O3 Composite Powders Produced by Mechanical Alloying

ÇANAKÇI A., VAROL T., ÖZŞAHİN Ş.

The 1st International Porous and Powder Materials Symposium and Exhibition PPM 2013, İzmir, Turkey, 3 - 06 September 2013, pp.722-726

2013

2013

Effects of different process control agent on characteristics of mechanically milled Al2024 powders

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., VAROL T.

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.804-808

2013

2013

Abresive wear behavior of powder metalurgy CuSn10 Graphite metal matrix composites produced by powder metallurgy

YALÇIN E. D., çanakçı a., varol t., özkaya s., erdemir f.

International Porous Powder Materials Symposium and Exhibition PPM2013, İzmir, Turkey, 3 - 06 September 2013, pp.4

2012

2012

Fabrication and characterization of Al2024-B4C composite powders by mechanical alloying method

ÇANAKÇI A., VAROL T.

16th International Metallurgy & Materials Congress, İstanbul, Turkey, 13 - 15 September 2012, pp.146-153

2012

2012

Optimization of process parameters of Al2024 powder produced by mechanical alloying

ÇANAKÇI A., ERDEMİR F., VAROL T.

16th International Metallurgy & Materials Congress, İstanbul, Turkey, 13 - 15 September 2012, pp.154-163

2011

2011

AA2024-B4C metal matrisli kompozitlerin mekanik alaşımlama yöntemi ile üretimi ve mikroyapısı

ÇANAKÇI A., VAROL T.

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 17 - 19 November 2011, pp.204-215

2011

2011

Yüksek enerjili öğütmeyle üretilen AA2024-B4C kompozit tozların karakterizasyonu

ÇANAKÇI A., VAROL T.

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 17 - 19 November 2011, pp.667-675

2011

2011

Toz metalurjisi yöntemi ile üretilen Al-Al2O3 kompozitlerinin özellikleri üzerine takviye oranının etkisi

ÇANAKÇI A., VAROL T., Ertok Ş.

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 17 - 19 November 2011, pp.144-154

2011

2011

Production Of Al-B4c Functionally Graded Material By Powder Metallurgy Method

ÇANAKÇI A., VAROL T., Zerrin i., ÖZKAYA S.

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.49-56 Creative Commons License

2011

2011

Production of Al-B4C functionally graded material by powder metallurgy method

ÇANAKÇI A., VAROL T., Zerin G. İ., ÖZKAYA S.

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.49-56

2011

2011

The effect of milling speed on particle morphology and particle size of Al2024 powders prepared by using high energy ball milling

ÇANAKÇI A., VAROL T., Şen R., Yıldız S.

6th International Powder Metallurgy Conferance & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.628-633

2011

2011

The effect of gradual process control agent technique on the morphology of Al powders fabricated by high energy ball milling

ÇANAKÇI A., VAROL T.

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.701-710

2011

2011

The effect of reinforcement ratio on hardness of Al-Al2O3 composites fabricated by mechanical alloying technique

ÇANAKÇI A., VAROL T., Ertok Ş.

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.232-240

2011

2011

The effect of amount of methanol on the properties of Al-Al2O3 composite powders

ÇANAKÇI A., VAROL T., Nazik C.

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.122-129

2011

2011

Aşamalı proses kontrol katkısı tekniğinin yüksek enerjili öğütme prosesi üzerine etkisi

ÇANAKÇI A., VAROL T.

I. Ulusal Nanoteknmoloji Kongresi, İstanbul, Turkey, 17 - 18 June 2011, pp.8-16

Books & Book Chapters

2022

2022

Materials for Lightweight Constructions

Varol T. (Editor)

CRC, New York , Florida, 2022 Sustainable Development

2022

2022

Additive Manufacturing of Non-ferrous Metals

Varol T., Güler O., Yıldız F., Kumar S. S.

in: Innovations in Additive Manufacturing, M. Adam Khan,J. T. Winowlin Jappes, Editor, Springer Nature, Berlin, pp.91-120, 2022

2020

2020

Fabrication of Functionally Graded Metal and Ceramic Powders Synthesized by Electroless Deposition

GÜLER O., VAROL T.

in: Advanced Surface Coating Techniques for Modern Industrial Applications, , Editor, IGI-Global, pp.150-187, 2020

Supported Projects

2023 - 2024

2023 - 2024

Hierarchically Structured Functional AA2024 Aerospace Alloy Processed by Hybrid Additive Manufacturing and Surface Engineering"Sustainable Development

TÜBİTAK International Bilateral Joint Cooperation Program Project

Varol T. (Executive)

2021 - 2023

2021 - 2023

Yakıt Pili Test Sistemi Kurulumu

Project Supported by Higher Education Institutions

AYDIN Ö. (Executive), CORA Ö. N., VAROL T., ÇUHADAROĞLU B., BALİ T.

2017 - 2020

2017 - 2020

İki katmanlı CuCuCrZn Elektrik Kontak Malzemesinin Toz Metalurjisi Yöntemi ile Üretimi

Project Supported by Higher Education Institutions

VAROL T. (Executive), ÇUVALCI H.

2017 - 2020

2017 - 2020

İki katmanlı CuAgCuNi Elektrik Kontak Malzemesinin Toz Metalurjisi Yöntemi ile Üretimi

Project Supported by Higher Education Institutions

VAROL T. (Executive), ÇANAKÇI A.

Patent

2023

2023

Simetrik olarak fonksiyonel derecelendirilmiþ hidroksiapatitzirkonya- grafen hibrit implant malzemesinin toz metalurjisi yöntemi ile üretimi.

Patent

Registered / Approved, The Invention Registration Number: TR 2018 17143 B , Standard Registration

2021

2021

İki Katmanlı Cu/Cu-Cr-Zn elektrik kontak malzemesinin toz metalurjisi ile üretimi

Patent

Registered / Approved, The Invention Registration Number: TR 2017 17243 B , Standard Registration

2020

2020

Toz Metalurjisi Yöntemi ile İki katmanlı Cu/Ag-Cu-Ni Elektrik Kontak Malzemesinin Toz Metalurjisi Yöntemi ile Üretimi

Patent

Registered / Approved, The Invention Registration Number: 102018000006803 , Standard Registration

Scientific Refereeing

October 2018

October 2018

Ceramics International

SCI Journal

May 2018

May 2018

Metallurgical and Materials Transactions A

SCI Journal

April 2018

April 2018

Journal of Alloys and Compounds

SCI Journal

April 2018

April 2018

Materials Science & Engineering A

SCI Journal

March 2018

March 2018

Materials Design

SCI Journal

Awards

July 2018

July 2018

Yayın Teşvik Ödülü

TÜBİTAK

January 2018

January 2018

Outstanding Reviewer Award

ELSEVİER-Tribology International

March 2017

March 2017

Outstanding Reviewer Award

ELSEVİER-Applied Surface Science

November 2016

November 2016

Outstanding Reviewer Award

Elsevier, Journal of Alloys and Compounds

April 2016

April 2016

Yayın Teşvik Ödülü

TÜBİTAK

June 2015

June 2015

YAYIN TEŞVİK ÖDÜLÜ

TÜBİTAK

January 2014

January 2014

Yayın Teşvik Ödülü

TÜBİTAK



Scholarships

2015 - 2016

2015 - 2016

Tübitak 3001 Bursiyer

TUBITAK

Citations

Total Citations (WOS): 2155

h-index (WOS): 32

Jury Memberships

June-2018

June 2018

Post Graduate

Tez Savunma Jurisi - 19 Mayıs Üniversitesi