Prof.Dr. ÜMİT ALVER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Synthesis and characterizations of Ce-doped ZnO thin films for radiation shielding

Soğuksu A. K., Kerli S., Kavun Y., ALVER Ü.

Optical Materials , cilt.148, 2024 (SCI-Expanded)

Improved super capacitive performance of hydrothermally developed Mn and Ni oxides along with activated carbon as ternary nanocomposite

Khalid F., Saleem M., Jabbar H., Tanvir M. G., Butt M. S., Baluch A. H., et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS , cilt.161, 2022 (SCI-Expanded)

The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating

GÜLER O., VAROL T., ALVER Ü., BIYIK S.

Advanced Powder Technology , cilt.32, ss.2873-2890, 2021 (SCI-Expanded)

Microstructure and wear characterization of Al2O3 reinforced silver coated copper matrix composites by electroless plating and hot pressing methods

GÜLER O., VAROL T., ALVER Ü., Kaya G., Yıldız F.

Materials Today Communications , cilt.27, 2021 (SCI-Expanded)

Influence of fluorine doping of zinc oxide on its electrochemical performance in supercapacitors

ERDEMİR F., Tuzcu E., BİLGİN S., ALVER Ü., ÇANAKÇI A.

MATERIALS CHEMISTRY AND PHYSICS , cilt.259, 2021 (SCI-Expanded)

Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool

Bilgin S., Güler O., Alver Ü., Erdemir F., Aslan M., Çanakçı A.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.1, ss.263-273, 2021 (SCI-Expanded)

Low-energy impact response of composite sandwich panels with thermoplastic honeycomb and reentrant cores

Özen İ., Çava K., Gedikli H., Alver Ü., Aslan M.

THIN-WALLED STRUCTURES , cilt.156, 2020 (SCI-Expanded)

Fabrication and characterization of novel layered materials produced by electroless plating and hot pressing

Güler O., Alver Ü., Varol T.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.835, 2020 (SCI-Expanded)

Effect of Al2O3 content and milling time on the properties of silver coated Cu matrix composites fabricated by electroless plating and hot pressing

Güler O., Varol T., Alver E., Çanakçı A.

MATERIALS TODAY COMMUNICATIONS , cilt.24, 2020 (SCI-Expanded)

Investigation of the Electrical Properties of Al85Y9Ni6 Metallic Glass and Formulation of the Results

Kerli S., ALVER Ü., Gogebakan M.

GLASS PHYSICS AND CHEMISTRY , cilt.46, sa.2, ss.189-193, 2020 (SCI-Expanded)

Mechanical and Vibrational Behavior of Twill Woven Carbon Fiber Reinforced Composites

John K. M., Kumaran S. T., Kumar K. S., Kumar S. S., Aslan M., Alver U.

INTERNATIONAL POLYMER PROCESSING , cilt.35, sa.2, ss.203-210, 2020 (SCI-Expanded)

Effect of Ethanol on the Photovoltaic Performance of ZnO Based Dye Sensitized Solar Cells

Alver U., Kudret A., Kerli S.

CRYSTALLOGRAPHY REPORTS , cilt.64, sa.7, ss.1159-1164, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Optical and Dielectric Properties of PMMA/alpha-Fe2O3-ZnO Nanocomposite Films

ALVER Ü., TASCIOGLU M. E., GÜLER O., ASLAN M., YAZGAN A., KAYA H., et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS , cilt.29, sa.5, ss.1514-1522, 2019 (SCI-Expanded)

The effect of flake-like morphology on the coating properties of silver coated copper particles fabricated by electroless plating

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.782, ss.679-688, 2019 (SCI-Expanded)

Structural and Morphological Properties of Boron Doped V2O5 Thin Films: Highly Efficient Photocatalytic Degradation of Methyl Blue

Kerli S., ALVER Ü., Eskalen H., URUŞ S., Soguksu A. K.

RUSSIAN JOURNAL OF APPLIED CHEMISTRY , cilt.92, sa.2, ss.304-309, 2019 (SCI-Expanded)

ELECTROCHEMICAL PROPERTIES AND PHOTOCATALYTIC ACTIVITY OF In2O3-Co3O4 THIN FILMS

Kerli S., ALVER Ü., Eskalen H., Soguksu A. K.

COMPTES RENDUS DE L ACADEMIE BULGARE DES SCIENCES , cilt.72, sa.3, ss.327-332, 2019 (SCI-Expanded)

EFFECT OF FIBRE CONTENT ON THE MECHANICAL PROPERTIES OF BASALT FIBRE REINFORCED POLYLACTIC ACID (PLA) COMPOSITES

ASLAN M., KAYA M., GÜLER O., ALVER Ü.

TEKSTIL VE KONFEKSIYON , cilt.28, sa.1, ss.66-71, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Boron doped ZnO embedded into reduced graphene oxide for electrochemical supercapacitors

Alver U., Tanriverdi A.

APPLIED SURFACE SCIENCE , cilt.378, ss.368-374, 2016 (SCI-Expanded)

Hydrothermal preparation of ZnO electrodes synthesized from different precursors for electrochemical supercapacitors

Alver U., Tanriverdi A., Akgul O.

SYNTHETIC METALS , cilt.211, ss.30-34, 2016 (SCI-Expanded)

Structural and physical properties of boron doped ZnO films prepared by chemical spray pyrolysis method

Kerli S., ALVER Ü., Tanriverdi A., Avar B.

CRYSTALLOGRAPHY REPORTS , cilt.60, sa.6, ss.946-950, 2015 (SCI-Expanded)

Effect of fluorine doping on the NO2-sensing properties of ZnO thin films

Sennik E., KERLİ S., ALVER Ü., ÖZTÜRK Z. Z.

SENSORS AND ACTUATORS B-CHEMICAL , cilt.216, ss.49-56, 2015 (SCI-Expanded)

Synthesis of boron doped ZnO particles by hydrothermal method

Alver U., Kerli S., Tanriverdi A., Yaykasli H.

JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS , cilt.17, ss.439-443, 2015 (SCI-Expanded)

Electro-Optical Properties of Liquid Crystals Composite with Zinc Oxide Nanoparticles

Eskalen H., Ozgan S., ALVER Ü., Kerli S.

ACTA PHYSICA POLONICA A , cilt.127, sa.3, ss.756-760, 2015 (SCI-Expanded)

Effect of F-doping on structural, electrical, and optical properties of NiO thin films

Kerli S., ALVER Ü.

CRYSTALLOGRAPHY REPORTS , cilt.59, sa.7, ss.1103-1106, 2014 (SCI-Expanded)

Boron and fluorine doped ZnO films obtained from zinc chloride precursor via chemical spray pyrolysis

Kerli S., ALVER Ü., Tanriverdi A., Avar B.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.50, sa.6, ss.797-802, 2014 (SCI-Expanded)

Investigation of the properties of In doped NiO films

Kerli S., Alver U., Yaykaşlı H.

APPLIED SURFACE SCIENCE , cilt.318, ss.164-167, 2014 (SCI-Expanded)

In-situ generation of ZnO on the textile surfaces by hydrothermal method

Balci O., Alver U., Besen B. S., Tanriverdi A., Tutak M.

INDUSTRIA TEXTILA , cilt.65, sa.2, ss.80-84, 2014 (SCI-Expanded)

Effect of boron addition on fluorine doped ZnO particles

Kerli S., Alver U., Yaykasli H., Okumus M.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.52, sa.2, ss.93-98, 2014 (SCI-Expanded)

Synthesis and characterization of boron-doped NiO thin films produced by spray pyrolysis

Alver U., Yaykaşlı H., Kerli S., Tanriverdi A.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS , cilt.20, sa.11, ss.1097-1101, 2013 (SCI-Expanded)

Synthesis of Fluorine Doped Zinc Oxide Particles by Hydrothermal Method

Kerli S., Alver U., Yaykaşlı H., Avar B., Tanriverdi A., KURSUN C.

ASIAN JOURNAL OF CHEMISTRY , cilt.25, sa.13, ss.7539-7542, 2013 (SCI-Expanded)

Investigation on Zinc Selenide and Copper Selenide Thin Films Produced by Chemical Bath Deposition

Durdu B. G., Alver U., Kucukonder A., Sogut O., Kavgaci M.

ACTA PHYSICA POLONICA A , cilt.124, sa.1, ss.41-45, 2013 (SCI-Expanded)

Effect of UV-Ozone Exposure on PCBM

BELAY A. B., ZHOU W., KRUEGER R., DAVIS K. O., Alver U., SORLOAICA-HICKMAN N.

IEEE JOURNAL OF PHOTOVOLTAICS , cilt.2, sa.2, ss.148-153, 2012 (SCI-Expanded)

Optical and structural properties of ZnO nanorods grown on graphene oxide and reduced graphene oxide film by hydrothermal method

Alver U., ZHOU W., BELAY B., KRUEGER R., DAVIS K. O., HICKMAN N. S.

APPLIED SURFACE SCIENCE , cilt.258, sa.7, ss.3109-3114, 2012 (SCI-Expanded)

Influence of pH on structural, optical and morphological properties of ZnO rod arrays fabricated by hydrothermal method

Alver U., KUDRET A., KERLI S.

OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS , cilt.6, ss.107-109, 2012 (SCI-Expanded)

Dye-sensitized solar cells fabricated with black raspberry, black carrot and rosella juice

Tekerek S., Kudret A., Alver U.

INDIAN JOURNAL OF PHYSICS , cilt.85, sa.10, ss.1469-1476, 2011 (SCI-Expanded)

Spray pyrolysis deposition of ZnO thin films on FTO coated substrates from zinc acetate and zinc chloride precursor solution at different growth temperatures

Alver U., Kudret A., Tekerek S.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS , cilt.72, sa.6, ss.701-704, 2011 (SCI-Expanded)

A study on electrodeposited Zn-Co alloys

Karahan I. H., Karabulut O., Alver U.

PHYSICA SCRIPTA , cilt.79, sa.5, 2009 (SCI-Expanded)

High-field de Haas-van Alphen studies of the Fermi surfaces of LaMIn5 (M=Co,Rh,Ir)

HALL D., BALICAS L., FISK Z., GOODRICH R. G., Alver U., SARRAO J. L.

PHYSICAL REVIEW B , cilt.79, sa.3, 2009 (SCI-Expanded)

Temperature dependence of ZnO rods produced by ultrasonic spray pyrolysis method

Alver U., KILINC T., BACAKSIZ E., NEZIR S.

MATERIALS CHEMISTRY AND PHYSICS , cilt.106, ss.227-230, 2007 (SCI-Expanded)

Structure and optical properties of Zn1-xFexO thin films prepared by ultrasonic spray pyrolysis

Alver U., Kılınç T., Bacaksiz E., Nezir S.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY , cilt.138, sa.1, ss.74-77, 2007 (SCI-Expanded)

Synthesis and characterization of spray pyrolysis Zinc Oxide microrods

ALVER U., KILINC T., BACAKSIZ E., Kucukomeroglu T., NEZIR S., MUTLU I. H., et al.

THIN SOLID FILMS , cilt.515, ss.3448-3451, 2007 (SCI-Expanded)

Roughness analysis of CVD Cu films on different substrates by AFM imaging

Alver U.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.11, sa.6, ss.622-624, 2002 (SCI-Expanded)

The de Haas van Alphen effect in CeMIn5 (where M = Rh and Co)

HALL D., MURPHY T., PALM E., TOZER S., FISK Z., HARRISON N., et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B , cilt.16, ss.3004-3007, 2002 (SCI-Expanded)

Fermi surface of the heavy-fermion superconductor CeCoIn5: The de Haas-van Alphen effect in the normal state

HALL D., PALM E., MURPHY T., TOZER S., FISK Z., Alver U., et al.

PHYSICAL REVIEW B , cilt.64, sa.21, 2001 (SCI-Expanded)

Localized f electrons in CexLa1-xRhIn5: de Haas-van Alphen measurements

Alver U., GOODRICH R., HARRISON N., HALL D., PALM E., MURPHY T., et al.

PHYSICAL REVIEW B , cilt.64, sa.18, 2001 (SCI-Expanded)

Electronic structure of CeRhIn5: de Haas-van Alphen and energy band calculations

HALL D., PALM E., MURPHY T., TOZER S., PETROVIC C., MILLER-RICCI E., et al.

PHYSICAL REVIEW B , cilt.64, sa.6, 2001 (SCI-Expanded)

DIFFUSION OF AG IN BI(PB)-SR-CA-CU-O SUPERCONDUCTORS

DZHAFAROV T., COMERT H., ALTUNBAS M., ALVER U., KUCUKOMEROGLU T., KOPYA A.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.221, ss.264-266, 1995 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Compression Properties of 3d Printed Honeycomb and Re-Entrant Sandwich Core Materials

ÇAVA K., ASLAN M., ALVER Ü., GEDİKLİ H., Kalusuraman G.

SSRN Electronic Journal , 2020 (Hakemli Dergi)

Investigation of The Effect of Annealing on Resistivity in Aluminum-based Amorphous Alloys

Kerli S., Alver U., Gogebakan M.

PHYSICS AND CHEMISTRY OF SOLID STATE , cilt.20, sa.4, ss.391-395, 2019 (ESCI)

The investigation of the mechanical properties of sandwich panel composites with different surface and core materials

ASLAN M., GÜLER O., ALVER Ü.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.6, ss.1062-1068, 2018 (ESCI)

Preparation and Characterisation of ZnO/NiO Nanocomposite Particles for Solar Cell Applications

Kerli S., Alver U.

JOURNAL OF NANOTECHNOLOGY , 2016 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

PRODUCTION OF CELESTITE POWDER ADDED POLYMER COMPOSITE FOR THYROID PROTECTIVE COLLAR DESIGN AND INVESTIGATION OF GAMMA RAY SHIELDING CHARACTERISTICS

Özpınar İ., Çava K., Aslan M., Alver Ü., Apaydın G.

V. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, İstanbul, Türkiye, 15 - 16 Ocak 2023, ss.1053-1062

The Effect of pH on the Plating Layer of Silver Plated CopperPowders by Electroless Plating Method

VAROL T., AKÇAY S. B., GÜLER O., ALVER Ü.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.60-64

TOZ METALURJİSİ YÖNTEMİ İLE ÜRETİLEN CU-AG ALAŞIMLARININ KARAKTERİZASYONU

Varol T., Aksa H. C., Güler O., Alver Ü.

5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.74-77

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

Güler O., Varol T., Alver Ü., Akçay S. B.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 Aralık 2019, ss.198-207

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

GÜLER O., VAROL T., ALVER Ü., Akçay S. B.

2. Uluslararası 19 Mayıs Yenilikçi Bilimsel Yaklaşımlar Kongresi Uygulamalı Bilimler, 27 - 29 Aralık 2019

THE EFFECT OF ALUMINA CONTENT AND ELECTROLESS SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.208-218

PRODUCTION OF CU-AG-CR COMPOSITES FROM THE LAYERED METALLICPOWDERS

Güler O., Varol T., Alver Ü., Akçay S. B.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.190-197

THE EFFECT OF MECHANICAL MILLING TIME AND SILVER COATING ON THE PROPERTIES OF THE SILVER COATED COPPER MATRIX COMPOSITES

Güler O., Varol T., Alver Ü., Aksa H. C.

2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.219-228

WEAR PROPERTIES OF CU-AG-NI COMPOSITES PRODUCED BY ELECTROLESS COATING AND HOT-PRESSING

GÜLER O., VAROL T., ALVER Ü., AKÇAY S. B.

2. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.198-207

Comparison of Mechanical Properties of 3D Printed Sandwich Materials in Cellular and Auxetic Pattern

ASLAN M., çava k., ALVER Ü., GEDİKLİ H.

INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019

Investigation of Impact Behavior of Sandwich Materials with 3D Printed Auxetıc and Cellular Core Geometries

Özen İ., Çava K., Gedikli H., Alver Ü., Aslan M.

INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019

Effect of Acetone Vapor on Surface and Mechanical Properties of 3D Printed ABS in Different Layer Thicknesses

Çava K., Aslan M., Alver Ü.

INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019

Fabrication of Cu-Ag-Ni Layered Bulk Samples by Electroless Plating and Powder Metallurgy Method

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.25, ss.346-352

Oxidation Resistance of Silver Coated Copper Powders with Different Morphologies

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.25, ss.340-345

The Investigation of the Mechanical and Physical Properties of Silver Coated Copper Fabricated by Electroless Coating

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.197

The Effect of Milling Time On the Coating Thickness of Silver Coated Copper Particles

GÜLER O., VAROL T., ALVER Ü., ÇANAKÇI A., ÇABUK M. A.

6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Türkiye, 13 - 15 Haziran 2019, ss.195

COMPRESSSİON BEHAVİOR OF AUXETİC AND HONEYCOMB CORE MATERİALS MANUFACTURES BY FDM PRİNTER

çava k., ASLAN M., ALVER Ü., GEDİKLİ H.

4th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2019, Antalya, Türkiye, 11 - 14 Nisan 2019

The Effect of Silver Coating on the Corrosion Behavior of Copper Based Materials

ALVER Ü., GÜLER O., VAROL T., ASLAN M.

19th International Metallurgy and Materials Congress, 25 - 27 Ekim 2018

Mechanical behavior of nettle fiber filled polylactic acid composites

ASLAN M., EZZATKHAHB A., ALVER Ü., BÜYÜKKAYA K.

International Technological Sciences and Design Sympossium, Giresun, Türkiye, 27 - 29 Haziran 2018

THE EFFECT OF BALL MILLING TIME ON THE PROPERTIES OF SILVER COATED COPPER MATERIALS PRODUCED BY POWDER METALLURG

VAROL T., ALVER Ü., GÜLER O., ERDEMİR F.

19TH International Metallurgy and Materials Congress, 25 - 27 Ekim 2018

The Effect of Ball Milling Time on the Properties of Silver Coated Copper Materials Produced by Powder Metallurgy

GÜLER O., ERDEMİR F., VAROL T., ALVER Ü.

19th International Metallurgy and Materials Congress (IMMC), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.176-178

The Investigation of the Eff ect of Nitrocarburizing on the Corrosion Resistance of AISI 4140 Steel

GÜLER O., Demir D., ÇUVALCI H., ALVER Ü.

19th International Metallurgy and Materials Congress (IMMC), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.1194-1197

Synthesis Of Fluorine Doped Tin Oxide Nanoparticles (Fto) By Sol-Gel Technique

GÜLER O., TUZCU E., ASLAN M., BİLGİN S., ALVER Ü.

International Tecnological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.449

Fabrication Of ZnO Nanoparticles By Solution Combustion Method

GÜLER O., ASLAN M., ALVER Ü., BİLGİN S., TUZCU E.

International Tecnological Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.448

DIMENSIONAL ACCURACYAND PULL-OUT PERFORMANCE OF3D PRINTED VERTEBRA MODELS

ASLAN M., Çava k., YERLİ H. K., YAZAR U., ALVER Ü.

International Symposium on 3D Printing in Medicine, Ankara, Türkiye, 16 - 17 Kasım 2018

Preparation and Characterisation of Cobalt Oxide Thin Films Obtained From Different Precursor Salts

KERLİ S., ÖZLÜ TORUN H., ALVER Ü., SOĞUKSU A. K.

International Advanced Researches Engineering Congress, 16 - 18 Kasım 2017, ss.668

TIO2/DYE/CUI AND ZNO/DYE/CUI SENSITIZED SOLID-STATE SOLAR CELLS

ALVER Ü., ÖZLÜ TORUN H., KERLİ S.

TURKISH PHYSICAL SOCIETY 33RD INTERNATIONAL PHYSICS CONGRESS, BODRUM, Türkiye, 6 - 10 Eylül 2017, ss.381

INVESTIGATION OF EFFECT OF LAYER THİCKNESS AND FAN SPEED ON MECHANICAL, SURFACE AND MICROSCOBIC PROPERTIES OF 3D PRINTED ABS POLYMERS

ASLAN M., ALVER Ü., GÜLER O., ÇAVA K.

INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES 3D-PTS2017, İstanbul, Türkiye, 3 - 04 Nisan 2017

The effect of the reinforcement content on the mechanical and physical properties of the polyester based carbon and basalt fibers reinfroced composites

ASLAN M., Kaymaz E. G., GÜLER O., ALVER Ü.

2nd International Defence Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.146

Mechanical Performance of Laminar and Tubular Carbon Epaxy Prepreg Composites by Vacum Bag Oven Method

ASLAN M., GÜLER O., CAVA K., ALVER Ü.

2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, ss.144

An Investigation on Mechanical Properties of the Sandwich Panel Composites

ASLAN M., GÜLER O., CAVA K., ALVER Ü., YÜCELOĞLU E.

2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, ss.143

The Effect of the Reinforcement Content on the the Mechanical and Physical Properties of the Polyester Based Carbon and Basalt Fibers Reinforced Composites

ASLAN M., KAYMAZ E. G., GÜLER O., ALVER Ü.

2nd International Defense Industry Syposium, 6 - 08 Nisan 2017, ss.146

The Effect of the Reinforcement Content on the Mechanical and Physical Properties of the Polyester Based Carbon and Basalt Fibers Reinforced Composites

Aslan M., Güler O., Kaymaz E. G., Alver Ü.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.627-635

The Effect of Basalt Fiber Content on the Physical-Mechanical Properties of the Basalt Fiber Reinforced Polylactic Acid (PLA) Composites

Aslan M., Güler O., Kaya M., Alver Ü.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.621-626

Mechanical Performance of Laminar and Tubular Carbon Epoxy Prepreg Composites by Vacuum Bag Oven Method

Aslan M., Güler O., Kaya M., Alver Ü.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.611-620

An Investigation on the Mechanical Properties of the Sandwich Panel Composites

Aslan M., Güler O., Çava K., Alver Ü., Yüceloğlu E.

II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.602-610

Investigation of Effect of Layer Thickness and Fan Speed on Mechanical, Surface and Microscopic Properties of 3D Printed ABS Polymers

ASLAN M., GÜLER O., ALVER Ü., ÇAVA K.

2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3 - 04 Nisan 2017

Metrikler

Yayın

125

Atıf (WoS)

1185

H-İndeks (WoS)

Atıf (Scopus)

946

H-İndeks (Scopus)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim