Arş. Gör. AYŞE CANDAN CANDERE

Yayın Ağı

Makaleler 8

1. A novel fabrication method for polymeric flat plate pulsating heat pipe via additive manufacturing

CANDAN CANDERE A., Miché N., Bernagozzi M., SAĞLAM M., Georgoulas A., AYDIN O., et al.

Applied Thermal Engineering , cilt.241, 2024 (SCI-Expanded)

2. Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes

MARKAL B., Candere A., AVCI M., AYDIN O.

International Communications in Heat and Mass Transfer , cilt.127, 2021 (SCI-Expanded, Scopus)

3. Investigation of flat plate type pulsating heat pipes via flow visualization-assisted experiments: Effect of cross sectional ratio

MARKAL B., Candere A., AVCI M., AYDIN O.

International Communications in Heat and Mass Transfer , cilt.125, 2021 (SCI-Expanded, Scopus)

4. Prediction of Two-Phase Heat Transfer Coefficient of Flow Boiling in Minichannels

MARKAL B., Candan A., AYDIN O., Avcı M.

HEAT TRANSFER ENGINEERING , cilt.41, sa.1, ss.17-35, 2020 (SCI-Expanded, Scopus)

5. Flow boiling characteristics in a novel minichannel with a step on each corner

Markal B., Candan A., Aydın O.

EXPERIMENTAL HEAT TRANSFER , cilt.33, sa.1, ss.1-17, 2020 (SCI-Expanded, Scopus)

6. Experimental investigation of flow boiling in single minichannels with low mass velocities

Markal B., Candan A., AYDIN O., Avci M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.98, ss.22-30, 2018 (SCI-Expanded, Scopus)

7. Minikanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

CANDAN A., MARKAL B., AYDIN O., AVCI M.

Tesisat Mühendisliği , sa.164, ss.29-38, 2018 (Hakemli Dergi)

8. Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio

Candan A., MARKAL B., AYDIN O., Avci M.

EXPERIMENTAL HEAT TRANSFER , cilt.31, sa.6, ss.531-551, 2018 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 7

1. Effect of bending angle on the thermal performance of a polymeric flat plate pulsating heat pipe

Marengo M., Candan Candere A., Clemens F., Miché N., Bernagozzı M., Sağlam M., et al.

Joint 22nd International Heat Pipe Conference and 16th International Heat Pipe Symposium, Bangkok, Tayland, 24 - 28 Kasım 2024, ss.420-425, (Tam Metin Bildiri)

2. FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION

Miche N., Candan Candere A., Clemens F., Bernagozzi M., Georgoulas ., Bertola ., et al.

18th UK Heat Transfer Conference, Birmingham, İngiltere, 9 - 11 Eylül 2024, ss.1-3, (Özet Bildiri)

3. DOLUM ORANININ ÜNİFORM OLMAYAN KESİTE SAHİP ATIMLI ISI BORUSUNUN ÇALIŞMA PERFORMANSI ÜZERİNDEKİ ETKİSİ

Candan Candere A., Markal B., Avcı M., Aydın O.

ULUSLARARASI KATILIMLI 23. ISI BİLİMİ VE TEKNİĞİ KONGRESİ, Gaziantep, Türkiye, 8 - 10 Eylül 2021, cilt.2, ss.1797-1805, (Tam Metin Bildiri)

4. EXPERIMENTAL INVESTIGATION OF THE PULSATING HEAT PIPES HAVING LARGER FLOW SECTIONS IN THE EVAPORATOR REGION

Candan Candere A., Markal B., Aydın O., Avcı M.

5th International Anatolian Energy Symposium, Trabzon, Türkiye, 24 - 25 Mart 2021, ss.630-636, (Tam Metin Bildiri)

5. Kesiti T-Şeklinde Olan Tek Bir Mini Kanalda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

MARKAL B., CANDAN A., AYDIN O.

4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu, Edirne, Türkiye, 18 - 20 Nisan 2018, cilt.1, sa.1, ss.561-572, (Tam Metin Bildiri)

6. Flow Boiling Characteristics in a Single Rectangular Minichannel

MARKAL B., CANDAN A., AYDIN O., AVCI M.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.2075-2081, (Tam Metin Bildiri)

7. Kare Kesitli Mini Bir Kanal İçerisinde Kaynamalı Akışın Deneysel İncelenmesi

CANDAN A., MARKAL B., AYDIN O., AVCI M.

21.Ulusal Isı Bilimi ve Tekniği Kongresi, Çorum, Türkiye, 13 - 16 Eylül 2017, ss.313-321, (Tam Metin Bildiri)

Metrikler

Arş. Gör. AYŞE CANDAN CANDERE

Yayınlar & Eserler

1. A novel fabrication method for polymeric flat plate pulsating heat pipe via additive manufacturing

2. Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes

3. Investigation of flat plate type pulsating heat pipes via flow visualization-assisted experiments: Effect of cross sectional ratio

4. Prediction of Two-Phase Heat Transfer Coefficient of Flow Boiling in Minichannels

5. Flow boiling characteristics in a novel minichannel with a step on each corner

6. Experimental investigation of flow boiling in single minichannels with low mass velocities

7. Minikanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

8. Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio

1. Effect of bending angle on the thermal performance of a polymeric flat plate pulsating heat pipe

2. FLEXIBLE POLYMERIC PULSATING HEAT PIPES: FABRICATION TECHNIQUES AND THERMAL PERFORMANCE INVESTIGATION

3. DOLUM ORANININ ÜNİFORM OLMAYAN KESİTE SAHİP ATIMLI ISI BORUSUNUN ÇALIŞMA PERFORMANSI ÜZERİNDEKİ ETKİSİ

4. EXPERIMENTAL INVESTIGATION OF THE PULSATING HEAT PIPES HAVING LARGER FLOW SECTIONS IN THE EVAPORATOR REGION

5. Kesiti T-Şeklinde Olan Tek Bir Mini Kanalda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

6. Flow Boiling Characteristics in a Single Rectangular Minichannel

7. Kare Kesitli Mini Bir Kanal İçerisinde Kaynamalı Akışın Deneysel İncelenmesi

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje