Yayınlar & Eserler

Yayın Ağı
Makaleler 10
Tümü (10)
SCI-E, SSCI, AHCI (6)
SCI-E, SSCI, AHCI, ESCI (7)
ESCI (1)
Scopus (7)
TRDizin (1)
Diğer Yayınlar (2)

1. A machine learning approach for predicting flexural strength in short carbon fiber reinforced PLA composites

KARABACAK Y. E., VATANDAŞ B. B., GÜMRÜK R.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM , 2025 (ESCI) identifier

2. Additive manufacturing and mechanical performance of short fiber reinforced PEEK (polyether ether ketone) thermoplastic composites in a vacuum environment

Vatandaş B. B., Gümrük R.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.134, sa.3-4, ss.1677-1698, 2024 (SCI-Expanded, Scopus) identifier identifier

3. Obtaining excellent mechanical properties with additively manufactured short fiber reinforced polyether-ether-ketone thermoplastics through simultaneous vacuum and infrared heating

GÜMRÜK R., VATANDAŞ B. B., UŞUN A.
ADDITIVE MANUFACTURING , cilt.94, 2024 (SCI-Expanded, Scopus) identifier identifier

4. Mechanical performances of continuous carbon fiber reinforced PEEK (polyether ether ketone) composites printed in a vacuum environment

Vatandaş B. B., UŞUN A., GÜMRÜK R.
Journal of Manufacturing Processes , cilt.120, ss.579-594, 2024 (SCI-Expanded, Scopus) identifier identifier

5. Enhanced mechanical properties of continuous carbon fiber reinforced polyether-ether-ketone composites via infrared preheating and high fiber volume fraction

Uşun A., Vatandaş B. B., Gümrük R.
ADDITIVE MANUFACTURING , cilt.89, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

6. The Relationship Between Fiber Bundle Size and Mechanical Performance of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic Composites

Vatandas B. B., UŞUN A., Guemruek R., Simsek C.
3D PRINTING AND ADDITIVE MANUFACTURING , cilt.10, sa.6, ss.1190-1203, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

7. Additive manufacturing of PEEK-based continuous fiber reinforced thermoplastic composites with high mechanical properties

Vatandas B. B., UŞUN A., Yildiz N., Simsek C., CORA Ö. N., ASLAN M., et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.167, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

8. Examination of the influence of printing parameters for the continuous carbon fiber-reinforced thermoplastics based on fused deposition modeling

Uşun A., Gümrük R., Yıldız N., Vatandaş B. B.
The International Journal of Materials and Engineering Technology , cilt.5, sa.2, ss.65-70, 2022 (Hakemli Dergi)

9. Obtaining High Mechanical Properties Polyamide - Continuous Carbon Fiber Reinforced Thermoplastic Composites with Infrared Heating

NERGÜN M., ÖNEL N., VATANDAŞ B. B., UŞUN A., GÜMRÜK R.
Avrupa Bilim ve Teknoloji Dergisi , ss.222-226, 2022 (Hakemli Dergi)

10. The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties

Vatandaş B. B., Gümrük R., Uşun A., Yıldız N.
Open Journal of Nano , cilt.7, sa.1, ss.10-17, 2022 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 11

1. CAVITATION PHENOMENA IN DIESEL INJECTOR NOZZLES: KEY INFLUENCING FACTORS AND MECHANISMS - A MINI REVIEW

Gülüm M., Vatandaş B. B.
7th INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 24 - 26 Aralık 2024, ss.380-397, (Tam Metin Bildiri)

2. The Effect of Printing Parameters on Mechanical Properties In Pla Materials Produced By FDM Method

Çamtekne A. H., Vatandaş B. B., Uşun A., Gümrük R.
4th Baskent International Conference On Multidisciplinary Studies, Ankara, Türkiye, 4 - 06 Ağustos 2023, ss.1-10, (Tam Metin Bildiri)

3. Interlayer Bonding Behaviours of Continuous Carbon Fiber Reinforced Peek Composites 3D Printed in Vacuum

Vatandaş B. B., Gümrük R.
13th International İstanbul Scientific Research Congress on Life, Engineering, and Applied Sciences, İstanbul, Türkiye, 15 Mayıs 2023, ss.115-123, (Tam Metin Bildiri) Creative Commons License

4. Improving the Mechanical Properties of Continuous Fiber Reinforced Thermoplastic Composites Manufactured by FDM Method with Fiber Ratio Optimization

Uşun A., Vatandaş B. B., Gümrük R.
6. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 25 Şubat - 26 Mart 2023, ss.223-231, (Tam Metin Bildiri) Creative Commons License

5. Cabinet Design For Additive Manufacturing Under Vacuum Effect With FDM-Type Printers

Vatandaş B. B., Uşun A., Gümrük R.
6. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 25 Şubat - 26 Mart 2023, ss.216-222, (Tam Metin Bildiri) Creative Commons License

6. Effect of printing speed on mechanical properties of continuous fiber reinforced thermoplastic composites

Vatandaş B. B., Uşun A., Gümrük R.
3. INTERNATIONAL DİCLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Türkiye, 26 - 27 Kasım 2022, ss.1552-1561, (Tam Metin Bildiri)

7. The Effect of Peek Polymer and Carbon Fiber Interface Interaction on the Mechanical Behavior of Additively Manufactured Continuous Fiber Reinforced Composites

Vatandaş B. B., Uşun A., Gümrük R.
4. INTERNATIONAL GÖBEKLİTEPE SCIENTIFIC RESEARCH CONGRESS, Şanlıurfa, Türkiye, 7 - 08 Ekim 2022, ss.1043-1050, (Tam Metin Bildiri)

8. Obtaining High Mechanical Properties Polyamide - Continuous Carbon Fiber Reinforced Thermoplastic Composites with Infrared Heating

Nergün M., Önel N., Vatandaş B. B., Uşun A., Gümrük R.
1 ST INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED NATURAL SCIENCES , Konya, Türkiye, 10 - 13 Mayıs 2022, ss.2096, (Özet Bildiri)

9. Improving the Interlaminar Bonding Performance of Additively Manufactured Continuous Fiber Reinforced Thermoplastic Composites Using an Infrared Heat Source

Uşun A., Vatandaş B. B., Gümrük R.
2.ND INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Türkiye, 10 - 13 Mart 2022, ss.462-466, (Tam Metin Bildiri) Creative Commons License

10. The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties

Vatandaş B. B., Gümrük R., Uşun A., Yıldız N.
5th International Conference on Engineering Technologies (ICENTE 2021), Konya, Türkiye, 18 - 21 Kasım 2021, ss.154, (Tam Metin Bildiri)

11. Examination of the Influence of Printing Parameters for the Continuous Carbon Fiber-Reinforced Thermoplastics Based on Fused Deposition Modeling

Uşun A., Gümrük R., Yıldız N., Vatandaş B. B.
The 3rd International Conference of Materials and Engineering Technology (TICMET21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.257, (Özet Bildiri)
Metrikler

Yayın

21

Yayın (WoS)

7

Yayın (Scopus)

7

Atıf (WoS)

127

H-İndeks (WoS)

5

Atıf (Scopus)

141

H-İndeks (Scopus)

5

Atıf (Scholar)

174

H-İndeks (Scholar)

6

Proje

2

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları