Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The effect of quench-aging on the mechanical properties of Zn-27Al-1Cu alloy

AYDIN M., Senaslan F.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.109, sa.8, ss.699-707, 2018 (SCI-Expanded) identifier identifier identifier

Optimization of Mechanical Alloying Parameters of Cu25W Electrical Contact Material

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.909-912, 2017 (SCI-Expanded) identifier identifier

Fabrication and Arc-Erosion Behavior of Ag8SnO(2) Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.339-342, 2017 (SCI-Expanded) identifier identifier

Fabrication and Arc-Erosion Behavior of Ag8SnO2 Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.131, ss.339-342, 2017 (SCI-Expanded)

Investigation of the Effect of Different Current Loads on the Arc-Erosion Performance of Electrical Contacts

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.656-660, 2016 (SCI-Expanded) identifier identifier

The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

AYDIN M., BIYIK S.
ACTA PHYSICA POLONICA A , sa.127, ss.1255-1260, 2015 (SCI-Expanded)

The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1255-1260, 2015 (SCI-Expanded)

Arc-Erosion Behavior of Boric Oxide-Reinforced Silver-Based Electrical Contact Materials Produced by Mechanical Alloying

BIYIK S., Arslan F., AYDIN M.
JOURNAL OF ELECTRONIC MATERIALS , cilt.44, sa.1, ss.457-466, 2015 (SCI-Expanded) identifier identifier

Effect of equal channel angular pressing on microstructural and mechanical properties of as cast Al-20 wt-%Zn alloy

AYDIN M., HEYAL Y.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.29, sa.6, ss.679-688, 2013 (SCI-Expanded) identifier identifier

High-cycle fatigue behavior of severe plastically deformed binary Zn-60Al alloy by equal-channel angular extrusion

Aydin M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.212, sa.8, ss.1780-1789, 2012 (SCI-Expanded) identifier identifier

Mechanical Propeties Of Equal-Channel Angular Extrsuion-Processed Al-20zn Alloy

AYDIN M., HEYAL Y.
MATERIALS AND MANUFACTURING PROCESSES , sa.445, ss.195-200, 2012 (SCI-Expanded)

Enhancement of Tensile Ductility of Severe Plastically Deformed Two-Phase Zn-12Al Alloy by Equal Channel Angular Extrusion

AYDIN M., PÜRÇEK G., KÜÇÜKÖMEROĞLU T., SARAY O.
Materials Science Forum , cilt.633-634, ss.437-447, 2010 (SCI-Expanded)

Enhancement of Tensile Ductility of Severe Plastically Deformed Two-Phase Zn-12Al Alloy by Equal Channel Angular Extrusion

PÜRÇEK G., AYDIN M., Saray O., KÜÇÜKÖMEROĞLU T.
DUCTILITY OF BULK NANOSTRUCTURED MATERIALS , ss.437-447, 2010 (SCI-Expanded) identifier identifier

Fatigue behaviour of monotectoid-based Zn-Al-Cu alloys in 3.5% NaCl and 1% HCl solutions

Savaskan T., Aydın M.
MATERIALS CHARACTERIZATION , cilt.52, sa.4-5, ss.269-278, 2004 (SCI-Expanded) identifier identifier

Fatigue properties of zinc-aluminium alloys in 3.5% NaCl and 1% HCl solutions

Aydin M., Savaskan T.
INTERNATIONAL JOURNAL OF FATIGUE , cilt.26, sa.1, ss.103-110, 2004 (SCI-Expanded) identifier identifier

Fatigue behaviour of Zn-Al casting alloys

Savaskan T., Aydin M., Odabaşıoğlu H. A.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.17, sa.6, ss.681-685, 2001 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Investigation of microstructural change and damping behaviour of Zn–27Al– 1Cu alloy in different aging periods

Aydın M.
Gümüşhane Üniversitesi Fen Bilimleri Dergisi , cilt.12, sa.2, ss.636-648, 2022 (Hakemli Dergi)

Enhancement of tensile ductility of severe plastically deformed two-phase Zn-12Al alloy by equal channel angular extrusion

PÜRÇEK G., AYDIN M., SARAY O., KÜÇÜKÖMEROĞLU T.
Materials Science ForuM , cilt.633, sa.633, ss.437-447, 2010 (Scopus)

Çinko-Alüminyum Esaslı Alaşımların Yorulma Özelliklerinin İncelenmesi

AYDIN M., SAVAŞKAN T., KÜÇÜKÖMEROĞLU T.
Mühendis ve Makina , cilt.38, sa.444, ss.40-45, 1997 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Optimization of Mechanical Alloying Parameters in Cu25W Electrical Contact Material

AYDIN M., BIYIK S.
3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2018, ss.475

Effect of TiO2 on Physical and Mechanical Properties of Electrical Contact Materials

AYDIN M., BIYIK S.
15th European Mechanics of Materials Conference, Brussels, Belçika, 7 - 09 Eylül 2018, ss.459

Effect Of Quenching Process On The Mıcrostructure And Mechanıcal Propertıes Of Cold Formed Aısı 4140 Low Alloy Steel

KAYA M. A., AYDIN M.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018

Effect of Quench-Ageing on Microstructural Evolution and Damping Behaviour of Zn-27Al-1Cu Alloy

ŞENASLAN F., AYDIN M.
ISLAC’18 “1st International Symposium on Light Alloys and Composite Materials”, Karabük, Türkiye, 22 - 24 Mart 2018, ss.277

Optimization of Mechanical Alloying Parameters in Cu25W Electrical Contact Materia

BIYIK S., AYDIN M.
3rd International Conference on Computational and Experimental Science and Engineering, 19 - 24 Ekim 2016

Optimization of Mechanical Alloying Parameters in Cu25W Electrical Contact Material

BIYIK S., AYDIN M.
3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.475

Fabrication and Arc-Erosion Behavior of Ag8SnO2 Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
6th The International Advances in Applied Physics and Materials Science Congress & Exhibition, İstanbul, Türkiye, 1 - 03 Haziran 2016, ss.128

Effect of TiO2 Dopant on Particle Size and Morphology of Ag8SnO2 Composite Powder

AYDIN M., BIYIK S.
Proceedings of the International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.170-175

Influence of Sintering Temperature on Physical and Mechanical Properties of Ag8SnO2 Electrical Contact Material

AYDIN M., BIYIK S.
Proceedings of the International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.164-169

Investigation of the Effect of Different Current Loads on the Arc-Erosion Performance of Electrical Contacts Using New Life-Test Equipment

AYDIN M., BIYIK S.
5th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 16 - 19 Nisan 2015

The Effect of Ball-to-Powder Weight Ratio on Particle Size and Morphology of Cu25W Composite Powder

AYDIN M., BIYIK S.
7th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 12 - 15 Kasım 2014, ss.186-187

The effect of the amount of process control agent on the properties of Cu25W composite powder

AYDIN M., BIYIK S.
2014 International Conference on High Performance and Optimum Design of Structures and Materials,, Ostend, Belçika, 9 - 11 Haziran 2014, ss.189-200

The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

Bıyık S., Aydın M.
4th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 24 - 27 Nisan 2014, ss.981

The Effect og Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

AYDIN M., BIYIK S.
4th International Advances in Applied physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 24 - 27 Nisan 2014, ss.981

A New Life-Test Equipment Designed for Medium-Duty Electromagnetic Contactors

AYDIN M., BIYIK S.
15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, Gent, Belçika, 7 - 09 Nisan 2014, ss.1-7

A new life-test equipment designed for medium-duty electromagnetic contactors

BIYIK S., AYDIN M.
IEEE 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EurosimE), Ghent, Belçika, 7 - 09 Nisan 2014, ss.1-7

Investigation of the Compaction Behaviour of Ag8ZnO Composite Produced by Mechanical Alloying

AYDIN M., BIYIK S.
1st International Porous and Powder Materials Symposium and Exhibition PPM 2013, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.145-149

Mechanical properties of equal-channel angular extrusion-processed Al-20Zn alloy

AYDIN M., HEYAL Y.
Advanced Materials Research, İstanbul, Türkiye, 23 - 24 Temmuz 2012, cilt.445, ss.195-200

Mechanical Properties of Equal-Channel Angular Extrusion-Processed Al-20Zn Alloy

AYDIN M., HEYAL Y.
14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.195-200 identifier identifier

Aşırı Plastik Deformasyon Yöntemiyle Üretilmiş Olan Metalik Biyomalzemelerin Yorulma Özelliklerinin İncelenmesi

AYDIN M.
III. Tıbbi Cihazlar ve İmalatı Kongre ve Sergisi, Samsun, Türkiye, 6 - 07 Kasım 2009, ss.59-63 Sürdürülebilir Kalkınma

Fatigue Behaviour of Zinc-Aluminium Alloys in Air and 1 % HCl Solution

AYDIN M., SAVAŞKAN T.
5th International Fracture Conference, Elazığ, Türkiye, 6 - 08 Eylül 2001, ss.143-150

Metrikler

Yayın

40

Atıf (WoS)

308

H-İndeks (WoS)

8

Atıf (Scopus)

322

H-İndeks (Scopus)

8

Atıf (Scholar)

190

H-İndeks (Scholar)

3

Proje

9

Tez Danışmanlığı

7

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları