Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effect of aging temperature on the lubricated wear resistance of multi-directionally forged Al-40Zn-3Cu alloy

UZUN M., KARABIYIK S., ALEMDAĞ Y., Savaşkan T.
Materials Today Communications , cilt.40, 2024 (SCI-Expanded) identifier identifier

Mechanical Properties of Al-9Si-0.6Mg-0.1Sr Alloy Processed By Successive Hot and Cold Multi-directional Forging

KARABIYIK S., ALEMDAĞ Y., Atmaca M., PÜRÇEK G., HEKİMOĞLU A. P.
JOM , cilt.76, sa.2, ss.807-817, 2024 (SCI-Expanded) identifier identifier

Influence of Homogenization and Quench-Aging Heat Treatments on Dry Wear Behavior of Al-40Zn-3Cu Alloy

Karabıyık S., Uzun M., Alemdağ Y., Savaşkan T.
TRIBOLOGY TRANSACTIONS , cilt.67, sa.3, ss.452-463, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Microstructure and Mechanical Properties of Severely Deformed Eutectic Al-Si-Cu-Mn Alloy

ALEMDAĞ Y., KARABIYIK S., PÜRÇEK G.
METALS AND MATERIALS INTERNATIONAL , cilt.29, sa.4, ss.1181-1194, 2023 (SCI-Expanded) identifier identifier

Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al-12Si-3Cu based alloy

Beder M., ALEMDAĞ Y.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.31, sa.8, ss.2208-2219, 2021 (SCI-Expanded) identifier identifier identifier

Effect of multi-directional hot forging on mechanical and tribological properties of Al-7Si-4Zn-3Cu alloy

ALEMDAĞ Y., KARABIYIK S., PÜRÇEK G.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.1, ss.255-265, 2021 (SCI-Expanded) Creative Commons License identifier identifier identifier

Effect of multi-directional hot forging process on the microstructure and mechanical properties of Al-Si based alloy containing high amount of Zn and Cu

ALEMDAĞ Y., KARABIYIK S., Mikhaylovskaya A. V., Kishchik M. S., PÜRÇEK G.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.803, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Effects of Mn Content on Microstructure, Mechanical and Dry Sliding Wear Properties of Eutectic Al-Si-Cu Alloy

ALEMDAĞ Y., Beder M.
METALS AND MATERIALS INTERNATIONAL , 2019 (SCI-Expanded) identifier identifier

Effects of zinc content on strength and wear performance of Al-12Si-3Cu based alloy

ALEMDAĞ Y., Beder M.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.29, sa.12, ss.2463-2471, 2019 (SCI-Expanded) identifier identifier

Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging

PÜRÇEK G., YANAR H., Demirtas M., ALEMDAĞ Y., SHANGINA D. V., DOBATKIN S. V.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.649, ss.114-122, 2016 (SCI-Expanded) identifier identifier

DRY SLIDING WEAR PROPERTIES OF Al-7Si-4Zn-(0-5)Cu ALLOYS

ALEMDAĞ Y., Beder M.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.21, sa.1, ss.154-165, 2015 (SCI-Expanded) identifier

Microstructural, mechanical and tribological properties of Al-7Si-(0-5)Zn alloys

ALEMDAĞ Y., Beder M.
MATERIALS & DESIGN , cilt.63, ss.159-167, 2014 (SCI-Expanded) identifier identifier

FRICTION AND WEAR BEHAVIOUR OF INTERMETALLIC Ni60Ti40 ALLOY MODIFIED WITH ALUMINIUM

ALEMDAĞ Y., COOPER R., LIANG H.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.19, sa.4, ss.558-569, 2013 (SCI-Expanded) identifier identifier

Effect of nickel additions on the mechanical and sliding wear properties of Al-40Zn-3Cu alloy

Savaskan T., ALEMDAĞ Y.
WEAR , cilt.268, ss.565-570, 2010 (SCI-Expanded) identifier identifier

Developing aluminium-zinc-based a new alloy for tribological applications

Savaskan T., BİCAN O., ALEMDAĞ Y.
JOURNAL OF MATERIALS SCIENCE , cilt.44, sa.8, ss.1969-1976, 2009 (SCI-Expanded) identifier identifier

Mechanical and tribological properties of Al-40Zn-Cu alloys

ALEMDAĞ Y., Savaskan T.
TRIBOLOGY INTERNATIONAL , cilt.42, sa.1, ss.176-182, 2009 (SCI-Expanded) identifier identifier

Effects of pressure and sliding speed on the friction and wear properties of Al-40Zn-3Cu-2Si alloy: A comparative study with SAE 65 bronze

Savaskan T., ALEMDAĞ Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.496, ss.517-523, 2008 (SCI-Expanded) identifier identifier

Effects of silicon content on the mechanical properties and lubricated wear behaviour of Al-40Zn-3Cu-(0-5)Si alloys

ALEMDAĞ Y., Savaskan T.
TRIBOLOGY LETTERS , cilt.29, sa.3, ss.221-227, 2008 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Çok Yönlü Sıcak Dövmenin Al-7Si Alaşımının Mekanik Özelliklerine Etkisi

ALEMDAĞ Y., KARABIYIK S.
Türk Mühendislik Araştırma ve Eğitimi Dergisi , cilt.1, sa.1, ss.20-28, 2022 (Hakemli Dergi)

Çözündürme ve Yaşlandırma İşleminin Al-7Si-4Zn-3Cu Alaşımının Sürtünme ve Aşınma Özelliklerine Etkisi

ALEMDAĞ Y., BEDER M.
Kırıkkale Üniversitesi Mühendislik Fakültesi Uluslararası MühendislikAraştırma ve Geliştirme Dergisi , cilt.11, sa.2, ss.602-611, 2019 (Hakemli Dergi) Sürdürülebilir Kalkınma

Dekoratif Amaçlı Krom Kaplamada Sıcaklık ve Akım Yoğunluğunun Kaplama Özelliklerine Etkisi

SAVAŞKAN T., ALEMDAĞ Y., PÜRÇEK G., KÜÇÜKÖMEROĞLU T.
MÜHENDİS VE MAKİNA , cilt.42, sa.494, ss.38-42, 2001 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

BİRBİRİ ARDINA UYGULANAN SICAK VE SOĞUK DÖVME İŞLEMLERİNİN AL-9Sİ-0,6MG-0,1SR ALAŞIMININ TRİBOLOJİK ÖZELLİKLERİNE ETKİSİ

Karabıyık S., Atmaca M., Alemdağ Y., Hekimoğlu A. P., Pürçek G.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.170-175

ÇOK YÖNLÜ DÖVÜLMÜŞ AL-12Sİ-3CU-0,5MN ALAŞIMININ TRİBOLOJİK DAVRANIŞININ İNCELENMESİ

Karabıyık S., Alemdağ Y., Pürçek G.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.164-169

ÇEVRİM SAYISININ ÇOK YÖNLÜ SICAK DÖVÜLMÜŞ AL-7Sİ-4ZN ALAŞIMININ MEKANİK ÖZELLİKLERİNE ETKİSİ

ALEMDAĞ Y., KARABIYIK S., PÜRÇEK G.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Türkiye, 18 - 20 Ekim 2019, ss.242-247

ÇOK YÖNLÜ SICAK DÖVÜLMÜŞ AL-7Sİ-4ZN ALAŞIMININ SÜRTÜNME VE AŞINMA ÖZELLİKLERİNİN İNCELENMESİ

ALEMDAĞ Y., KARABIYIK S., PÜRÇEK G.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Türkiye, 18 - 20 Ekim 2019, ss.236-241 Sürdürülebilir Kalkınma

, Effect of Severe Plastic Deformation on the Mechanical and Tribological Properties of Cu-30Zn Brass

ALEMDAĞ Y., PÜRÇEK G., Akgün M.
The 3th International Symposium, Bulk Nanostructured Material, BNM 2011, Ufa, Rusya, 23 Ağustos - 26 Eylül 2018, ss.131-133

Effect of Multi-Directional Forging on Tribological Properties of Al-7Si-4Zn-3Cu alloy

ALEMDAĞ Y., KARABIYIK S., YANAR H., PÜRÇEK G.
13th International Conference on Superplasticity in Advanced Materials, (ICSAM 2018), St. Petersburg, Rusya, 19 - 22 Ağustos 2018, ss.12

Mechanical properties of multi-directional forged Al-7Si-4Zn-3Cu alloy

ALEMDAĞ Y., KARABIYIK S., YANAR H., PÜRÇEK G.
13th International Conference on Superplasticity in Advanced Materials, ICSAM 2018, Petersburg, Rusya, 19 - 22 Ağustos 2018, cilt.385 DDF, ss.250-255 identifier

Friction Stir Processing Of Low Carbon Steels Used In Shipbuilding

SEKBAN D. M., AKTARER S. M., ALEMDAĞ Y., PÜRÇEK G.
Ultrafine grained and nanostructured materials (UFGNM), 3 - 07 Ekim 2016

Surface hardening of Al-12Si alloy by friction stir processing and its effect on friction and wear properties

YANAR H., PÜRÇEK G., SEKBAN D. M., AKTARER S. M., KÜÇÜKÖMEROĞLU T., ALEMDAĞ Y.
TURKEYTRIB 2015 1st International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.1

Effect of age hardening on the wear behaviour of the Al-7Si-4Zn-3Cu alloy

ALEMDAĞ Y., PÜRÇEK G., Beder M.
TURKEYTRIB 2015 1st International Conference on Tribology, İstanbul, Türkiye, 7 - 09 Ekim 2015, ss.1

Dry Sliding Wear Properties of Al-7Si-4Zn-(0-5)Cu Alloys

Alemdağ Y., Beder M.
8th International Conference on Tribology (BALKANTRIB’2014), Prahova, Romanya, 30 Ekim - 01 Kasım 2018, ss.119

Effect of severe plastic deformation on the mechanical and tribological properties of Cu-11Sn bronze

ALEMDAĞ Y., PÜRÇEK G., AKGÜN M.
The 3th International Symposium, Bulk Nanostructured Materials, BNM-2011, Ufa, Rusya, 23 - 26 Ağustos 2011, ss.1

Research on Materials Science: Connection to Energy Conversion

PÜRÇEK G., ALEMDAĞ Y.
Kick-Off Meeting of the International Institute for Multifunctional Materials for Energy Conversion (IIMEC), Texas, Amerika Birleşik Devletleri, 25 - 26 Ocak 2010, ss.1

Metrikler

Yayın

36

Atıf (WoS)

352

H-İndeks (WoS)

9

Atıf (Scopus)

405

H-İndeks (Scopus)

9

Atıf (TrDizin)

2

H-İndeks (TrDizin)

1

Proje

11

Tez Danışmanlığı

6

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları