Publications & Works

Publication Network
Articles 20
All (20)
SCI-E, SSCI, AHCI (20)
SCI-E, SSCI, AHCI, ESCI (20)
Scopus (20)

1. Breaking the Wettability–Performance Trade-Off: Porosity-Tuned novel Ti Liquid/Gas diffusion layers for PEM water electrolyzers via selective laser melting

Akçay S. B., Güler O., Varol T., Kaya M. F., Erdemir F., Aksa H. C., et al.
Fuel , vol.416, 2026 (SCI-Expanded, Scopus) Sustainable Development identifier

2. Substrate quench–tempering and coating post-annealing for electroless Ni–P coated 4140 steel for enhanced interface-wear synergy

Akçay S. B., Varol T., Güler O., Kocaman M., Yıldız U. T., Alptekin F.
Journal of the Taiwan Institute of Chemical Engineers , vol.183, 2026 (SCI-Expanded, Scopus) Sustainable Development identifier

3. Engineered expanded graphite/paraffin wax shape-stable phase change composite coated by copper and silver with outstanding latent heat storage capacity and thermal conductivity

GÜLER O., KOCAMAN M., SARI A., Bayraktar Erol T., ÇUVALCI H.
Applied Thermal Engineering , vol.298, 2026 (SCI-Expanded, Scopus) identifier

4. Particle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating

Güler O., Kocaman M., Adabaş Y., Özkaya S., Varol T., Akçay S. B., et al.
METALS , vol.16, pp.529, 2026 (SCI-Expanded, Scopus)

5. Optimization of laser powder bed fusion parameters for Ti-Ag parts from silver-coated Ti powders via response surface methodology

Akçay S. B., Varol T., Aksa H. C., Beder M., Güler O., Erdemir F., et al.
RAPID PROTOTYPING JOURNAL , vol.32, no.3, pp.665-687, 2026 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

6. Taguchi optimization of electrolytic Cu powders recycled from scrap Cu plates and properties of recycled Cu compacts processed by hot-pressing

Kocaman M., Varol T., Çuvalcı H., Akçay S. B., Güler O., Beder M., et al.
Journal of Materials Research and Technology , vol.40, pp.3873-3885, 2026 (SCI-Expanded, Scopus) Sustainable Development identifier

7. The role of enhanced process parameters on surface, microstructure, physical and mechanical properties of AlSi10Mg alloys manufactured by laser powder bed fusion

Beder M., Varol T., Akçay S. B., Aksa H. C., Güler O., Kocaman M.
MATERIALS TODAY COMMUNICATIONS , vol.49, 2025 (SCI-Expanded, Scopus) identifier identifier

8. Effect of mechanical milling parameters on the properties of electrolytic pure copper powders and hot pressed billets fabricated from recycled copper wastes

AKÇAY S. B., ÇUVALCI O., VAROL T., ÇUVALCI H., KOCAMAN M., ALVER Ü., et al.
MATERIALS CHEMISTRY AND PHYSICS , vol.346, 2025 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

9. Fabrication of mechanical durable novolac matrix composites with recycled and cost-effective candle-soot nano particles

Kocaman M., Güler O., Çuvalcı H., Akçay S. B.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , vol.44, no.21-22, pp.2063-2078, 2025 (SCI-Expanded, Scopus) identifier identifier

10. Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation

ÇELEBİ M., GÜLER O., KARABACAK A. H., ÇANAKÇI A., AKÇAY S. B., KOCAMAN M., et al.
Tribology International , vol.201, 2025 (SCI-Expanded, Scopus) identifier identifier

11. Effect of expandable graphite content on the physical, thermal and mechanical properties of novolac matrix composites: Halogen-free flame-retardant polymer composites

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T.
DIAMOND AND RELATED MATERIALS , vol.150, 2024 (SCI-Expanded, Scopus) identifier identifier

12. Enhancingmechanicalpropertiesand tribologicalperformancethroughboroncarbidehybridizationin Novolacmatrixgraphitecompositesunderdry slidingcondition

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T.
TRIBOLOGY INTERNATIONAL , vol.199, 2024 (SCI-Expanded, Scopus) identifier identifier

13. Effect of the Ag coated ABS granules and hot-pressing temperature on the microstructure evolution and properties of novel Ag/ABS composites

Akçay S. B., Kocaman M., Güler O., Ömür F. D., Varol T., Aslan M., et al.
Surfaces and Interfaces , vol.51, 2024 (SCI-Expanded, Scopus) Sustainable Development identifier identifier

14. Pre-hardening water quenching effect on the wear resistance of TiCN coated 4140 steels

YALÇIN E. D., GÜLER O., KARABACAK A. H., ÇANAKÇI A., VAROL T., KOCAMAN M., et al.
SURFACE & COATINGS TECHNOLOGY , vol.480, 2024 (SCI-Expanded, Scopus) identifier identifier

15. Surface modification for improving interfacial, mechanical and thermal performance characteristics in epoxy composites: Electroless nickel enhancement of dendritic copper particle-reinforced epoxy

Akçay S. B., Kocaman M., Çelebi M., Güler O., Varol T.
Surface and Coatings Technology , vol.478, 2024 (SCI-Expanded, Scopus) identifier identifier

16. The effect of recycled zinc powder content on the properties of novel novolac matrix hybrid composites

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T., Çuvalcı O.
TRIBOLOGY INTERNATIONAL , vol.188, 2023 (SCI-Expanded, Scopus) identifier identifier

17. The effect of novel advanced method on the properties of novolac hybrid nanocomposites reinforced with carbon nanotube and glass fiber

Kocaman M., Çuvalcı H., Çanakçı A.
JOURNAL OF APPLIED POLYMER SCIENCE , vol.140, no.36, 2023 (SCI-Expanded, Scopus) identifier identifier

18. Structure and tribological properties of composites based on a Novolac matrix with Ni-P electrolytic coating

Güler O., Kocaman M., Akçay S. B., Çuvalcı H., Varol T.
SURFACE & COATINGS TECHNOLOGY , vol.451, 2022 (SCI-Expanded, Scopus) identifier identifier

19. The evolution of tribological properties of graphite and glass fiber reinforced novolac matrix hybrid composites

KOCAMAN M., ÇUVALCI H.
POLYMER COMPOSITES , vol.43, no.12, pp.9100-9118, 2022 (SCI-Expanded, Scopus) identifier identifier

20. Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement

KOCAMAN M., ÇUVALCI H., GÜLER O.
FIBERS AND POLYMERS , vol.23, no.7, pp.2017-2029, 2022 (SCI-Expanded, Scopus) identifier identifier
Papers Presented at Peer-Reviewed Scientific Conferences 16

1. Microstructure, Hardness and Thermal Properties of Hot-Pressed Silver-coated Nylon-based Composites

Güler O., Kocaman M.
4. INTERNATIONAL PARIS CONGRESS ON APPLIED SCIENCES , Paris, France, 5 - 09 February 2025, pp.282-292, (Full Text)

2. PRELIMINARY INVESTIGATION ON THE MATERIAL PROPERTIES OF EXPANDED GRAPHITE STRUCTURES DOPED WITH PHASE CHANGE MATERIAL AND POLYMETHYL METHACRYLATE

GÜLER O., KOCAMAN M.
5th INTERNATIONAL CONGRESS ON KHAZAR SCIENTIFIC RESEARCH AND INNOVATION, Türkistan, Kazakhstan, 26 - 28 December 2024, pp.343-357, (Full Text)

3. EFFECT OF Al2O3 FILLER CONTENT ON MECHANICAL PROPERTIES OF NOVOLAC MATRIX COMPOSITES

KOCAMAN M., ÇUVALCI H., AKÇAY S. B., VAROL T.
5. International Congress on KHAZAR Scientific Research and Innovation, Türkistan, Kazakhstan, 26 - 28 December 2024, pp.336-342, (Full Text)

4. SiC REINFORCEMENT EFFECT ON MECHANICAL PROPERTIES OF NOVOLAC COMPOSITES

KOCAMAN M., ÇUVALCI H., AKÇAY S. B., VAROL T.
9TH INTERNATIONAL AZERBAIJAN CONGRESS ON LIFE, ENGINEERING, MATHEMATICAL, AND APPLIED SCIENCES CONGRESS, Azerbaijan, 20 - 22 December 2024, pp.717-725, (Full Text)

5. Fabrication and Mechanical Characterization of Boron Carbide Reinforced Novolac Composites

KOCAMAN M., ÇUVALCI H., AKÇAY S. B., VAROL T.
3rd International Conference on Recent Academic Studies ICRAS 2024, Konya, Turkey, 3 - 04 December 2024, pp.768-773, (Full Text)

6. EFFECTS OF B4C RATIO ON THE RECYCLE-BASED PRODUCTION OF TITANIUM-GRADE 4/B4C COMPOSITE POWDERS BY WET BALL MILLING

AKÇAY S. B., VAROL T., KOCAMAN M., Gedikaslan A.
3rd International Conference on Recent Academic Studies, Konya, Turkey, 3 - 04 December 2024, pp.690-697, (Full Text)

7. Investigation of the effects of hot-pressing temperature on Ti-B4C composite materials produced with 10% B4C reinforcement

AKÇAY S. B., VAROL T., ÇUVALCI O., KOCAMAN M., Atik G.
Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Turkey, 10 - 11 November 2024, pp.240-246, (Full Text)

8. Evaluation of Wear Behavior of Al2024 Alloy Produced via Powder Metallurgy Using the Taguchi Method

AKÇAY S. B., VAROL T., ERDEMİR F., KOCAMAN M.
Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Turkey, 10 - 11 November 2024, pp.232-239, (Full Text)

9. Effect of multi-walled CNT dispersion on the Mechanical Properties of Novolac hybrid nanocomposites

Kocaman M., Çuvalcı H., Çelebi M.
2nd International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 15 - 18 October 2022, pp.126-130, (Full Text)

10. Investigation of the effects of Electrolytic Ni-P Coating on the Wear Properties of Glass Fiber and Graphite Reinforced Novolac Matrix Hybrid Composites

Akçay S. B., Kocaman M., Güler O., Varol T., Çuvalcı H.
2nd International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 15 - 18 October 2022, pp.1132-1136, (Full Text)

11. The Effect of Aging Time and Temperature on The Hardness and Tensile Strength of Al2024 Alloy and Al2024/Graphene/B4C Hybrid Nanocomposite

Çelebi M., Çanakçı A., Kocaman M.
2nd International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 15 - 18 October 2022, pp.1104-1107, (Full Text) Creative Commons License

12. Application of electrolytic Ni-P coatings onto Novolac/Graphite/Glass Fiber hybrid composites

Güler O., Kocaman M.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 - 13 May 2022, pp.526-531, (Full Text)

13. Tribological properties of glass fiber reinforced Novolac/Gr hybrid composites

Kocaman M., Çuvalcı H.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 - 13 May 2022, pp.533-538, (Full Text)

14. Influence of the graphite content on the tribological properties of Novolac/GF/Gr hybrid composites

Kocaman M., Çuvalcı H., Güler O.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 - 13 May 2022, pp.516-522, (Full Text)

15. Effect of graphite particles on the mechanical and physical properties of Novolac/Gr/Glass fiber hybrid composites

Kocaman M., Çuvalcı H.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 1 - 03 November 2021, pp.308-314, (Full Text)

16. Effect of glass fiber rate on the mechanical and physical properties of Novolac/Gr/Glass fiber hybrid composites

Kocaman M., Çuvalcı H., Güler O.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 1 - 03 November 2021, pp.301-307, (Full Text)
Metrics

Publication

37

Publication (WoS)

20

Publication (Scopus)

20

Citation (WoS)

119

H-Index (WoS)

8

Citation (Scopus)

134

H-Index (Scopus)

8

Citation (Scholar)

144

H-Index (Scholar)

8

Project

10

Intellectual Property

2
UN Sustainable Development Goals