Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Impact of 316L Stainless Steel on Microstructural and Mechanical Properties of AA5083/316L Metal Matrix Composites

SEKBAN D. M.
JOM , cilt.77, sa.4, ss.1969-1978, 2025 (SCI-Expanded) identifier identifier

Analysis of the changes in microstructure, mechanical, and contact properties of multi-pass friction stir processed dp800 steel

AKTARER S. M., KÜÇÜKÖMEROĞLU T., SEKBAN D. M., Yaylacı E. U., YAYLACI M., Zdemir M. E. Ö., et al.
Advances in Nano Research , cilt.18, sa.3, ss.253-264, 2025 (SCI-Expanded) identifier

Determination of formability behavior of steel used in ships by various methods

SEKBAN D. M., UZUN YAYLACI E., Oezdemir M. E., YAYLACI M.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.92, sa.2, ss.189-196, 2024 (SCI-Expanded) identifier identifier

Formability behavior of AH-32 shipbuilding steel strengthened by friction stir process

SEKBAN D. M., UZUN YAYLACI E., Özdemir M. E., ÖZTÜRK Ş., YAYLACI M., Panda S. K.
Theoretical and Applied Fracture Mechanics , cilt.132, 2024 (SCI-Expanded) identifier identifier

Effect of Friction Stir Process on Mechanical Properties and Bottom Section Ultimate Strength of Ship Steel

SEKBAN D. M.
Journal of Materials Engineering and Performance , 2024 (SCI-Expanded) identifier

Investigating Formability Behavior of Friction Stir-Welded High-Strength Shipbuilding Steel using Experimental, Finite Element, and Artificial Neural Network Methods

SEKBAN D. M., UZUN YAYLACI E., Özdemir M. E., YAYLACI M., Tounsi A.
Journal of Materials Engineering and Performance , 2024 (SCI-Expanded) identifier identifier

The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch

Yaylacı M., Abanoz M., Yaylaci E. U., Ölmez H., Sekban D. M., Birinci A.
STEEL AND COMPOSITE STRUCTURES , cilt.43, sa.5, ss.661-672, 2022 (SCI-Expanded) identifier identifier

Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods

YAYLACI M., Abanoz M., Yaylaci E. U., ÖLMEZ H., SEKBAN D. M., BİRİNCİ A.
ARCHIVE OF APPLIED MECHANICS , cilt.92, sa.6, ss.1953-1971, 2022 (SCI-Expanded) identifier identifier

Determination of port-induced exhaust gas emission amounts and investigation of environmental impact by creating emission maps: Sample of Trabzon port

KÖSE S., SEKBAN D. M., ÖZKÖK M.
INTERNATIONAL JOURNAL OF SUSTAINABLE TRANSPORTATION , cilt.16, sa.3, ss.258-268, 2022 (SSCI) identifier identifier

Effects of Heat Treatment and Severe Plastic Deformation on Microstructure, Mechanical Properties and Midsection Ultimate Strength of Shipbuilding Steel

SEKBAN D. M.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, sa.10, ss.7805-7816, 2021 (SCI-Expanded) identifier identifier

Effect of stress-strain curve changing with equal channel angular pressing on ultimate strength of ship hull stiffened panels

SEKBAN D. M., ÖLMEZ H.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.78, sa.4, ss.473-484, 2021 (SCI-Expanded) identifier identifier

Optimization of strength, ductility and wear resistance of low-carbon grade A shipbuilding steel by post-ECAP annealing

DEMİRTAŞ M., SEKBAN D. M.
METALLURGICAL RESEARCH & TECHNOLOGY , cilt.118, sa.2, 2021 (SCI-Expanded) identifier identifier

Friction Stir Welding of Low-Carbon Shipbuilding Steel Plates: Microstructure, Mechanical Properties, and Corrosion Behavior

SEKBAN D. M., Aktarer S. M., PÜRÇEK G.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.9, ss.4127-4140, 2019 (SCI-Expanded) identifier identifier

Microstructure, mechanical properties and formability of friction stir welded dissimilar materials of IF-steel and 6061 Al alloy

AKTARER S. M., SEKBAN D. M., KÜÇÜKÖMEROĞLU T., PÜRÇEK G.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS , cilt.26, sa.6, ss.722-731, 2019 (SCI-Expanded) identifier identifier

Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints

Ipekoglu G., KÜÇÜKÖMEROĞLU T., AKTARER S. M., SEKBAN D. M., Cam G.
MATERIALS RESEARCH EXPRESS , cilt.6, sa.4, 2019 (SCI-Expanded) identifier identifier

Formability of friction stir processed low carbon steels used in shipbuilding

Sekban D. M., Akterer S. M., Saray O., Ma Z. Y., Purcek G.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , sa.1, ss.237-244, 2018 (SCI-Expanded) identifier identifier

Microstructural and Mechanical Evolution of a Low Carbon Steel by Friction Stir Processing

SEKBAN D. M., Aktarer S. M., Zhang H., Xue P., Ma Z., PÜRÇEK G.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.8, ss.3869-3879, 2017 (SCI-Expanded) identifier identifier

Impact toughness of friction stir processed low carbon steel used in shipbuilding

SEKBAN D. M., AKTARER S. M., XUE P., MA Z. Y., PÜRÇEK G.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.672, ss.40-48, 2016 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Microstructure, mechanical properties and formability of friction stir processed interstitial-free steel

SEKBAN D. M., Saray O., AKTARER S. M., PÜRÇEK G., MA Z. Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.642, ss.57-64, 2015 (SCI-Expanded) identifier identifier

Effect of two-pass friction stir processing on the microstructure and mechanical properties of as-cast binary Al-12Si alloy

AKTARER S. M., SEKBAN D. M., Saray O., KÜÇÜKÖMEROĞLU T., MA Z. Y., PÜRÇEK G.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.636, ss.311-319, 2015 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Örtülü Elektrod Ark Kaynağı, Gazaltı Kaynağı ve Tozaltı Kaynağı ile Birleştirilen Yüksek Mukavemetli AH32 Gemi İnşa Çeliğinin Mekanik Özelliklerinin Karşılaştırmalı İncelenmesi

SEKBAN D. M., YILDIZ H.
Karadeniz Fen Bilimleri Dergisi , cilt.14, sa.4, ss.1873-1887, 2024 (Hakemli Dergi) identifier

Investigation Mechanical Properties of Shipbuilding Steel Joined By Submerged Metal Arc Welding And Gas Metal Arc Welding Methods

Sekban D. M., Kılıcaslan R.
Karadeniz Fen Bilimleri Dergisi , cilt.13, sa.3, ss.1107-1116, 2023 (Hakemli Dergi) Creative Commons License identifier

Emphasizing the importance of using cold-ironing technology by determining the share of hotelling emission value within the total emission

Köse S., Sekban D. M.
TRANSPORTATION SAFETY AND ENVIRONMENT , cilt.4, sa.2, 2022 (ESCI) identifier identifier

CHARACTERIZATION OF WELDING ZONE OF SHIPBUILDING STEEL UNDERWATER WELDED AT DIFFERENT DEPTHS

SEKBAN D. M., NACAR A.
Journal of Naval Sciences and Engineering , cilt.17, sa.2, 2021 (Hakemli Dergi) identifier

Örtülü Elektrod Ark Kaynağı ve Gazaltı Kaynağı Kullanılarak Birleştirilen Gemi İnşa Çeliğinde Kaynak Bölgesinin İçyapı Ve Mekanik Özelliklerinin Karşılaştırmalı Olarak İncelenmesi

Akkaya A. R., SEKBAN D. M.
Gemi ve Deniz Teknolojisi , cilt.218, 2020 (Hakemli Dergi)

EFFECT OF DIFFERENT ABUTMENT MATERIALS ON STRESS DISTRIBUTION IN PERIPHERAL BONE AND DENTAL IMPLANT SYSTEM

Terzi M., GÜVERCİN Y., ATEŞ S. M., SEKBAN D. M., YAYLACI M.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.38, sa.3, ss.1495-1507, 2020 (ESCI) identifier

EŞ KANALLI AÇISAL PRESLEME (EKAP) UYGULANAN GEMİ İNŞA ÇELİĞİNİN İÇYAPI VE MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

SEKBAN D. M.
Mühendislik Bilimleri ve Tasarım Dergisi , cilt.8, sa.1, ss.240-251, 2020 (Hakemli Dergi)

Effect of Notch Position on Impact Toughness of Friction Stir Processed Low Carbon Steel

SEKBAN D. M., AKTARER S. M., MA Z. Y., PÜRÇEK G.
GMO JOURNALOF SHIP AND MARINE TECHNOLOGY , sa.207, ss.1-8, 2017 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

ÖN ISIL İŞLEM KOŞULLARININ Al6061 ALAŞIMININ SÜRTÜNME KARIŞTIRMA KAYNAK KABİLİYETİNE OLAN ETKİSİ

COŞKUN A., YANAR H., SEKBAN D. M.
3rd International Congress on Ship and Marine Technology, Trabzon, Türkiye, 10 - 12 Aralık 2024, cilt.1, ss.379-383, (Tam Metin Bildiri)

Examination of Welding Methods Used in Shipbuilding In Terms of Harmful Emissions

Sekban D. M.
2nd International Congress on Ship and Marine Technology (GMO-SHIPMAR 2021), İstanbul, Türkiye, 16 Eylül 2021, ss.635-639, (Tam Metin Bildiri)

Effect of Friction-Stir Processing on the Microstructure, Mechanical and Corrosion Behavior of a Low Carbon Steel Used in Ship Panel Construction

SEKBAN D. M., PÜRÇEK G.
3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1, (Tam Metin Bildiri)

Impact Toughness of Single Pass Equal Channel Angular Pressed Low Carbon Shipbuilding Steel

SEKBAN D. M.
3rd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.2, (Tam Metin Bildiri)

Effect of Ultrafine-Grained Formation on Tribological Properties of Low Carbon Shipbuilding Steel

Sekban D. M.
4th Iron&Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.46-48, (Tam Metin Bildiri)

Effect of Friction Stir Processing on Ultimate Strength of Ship Hull Girder Plates Estimated by Finite Element Analysis

SEKBAN D. M., ÖLMEZ H., AKTARER S. M., KÖSE E., PÜRÇEK G.
3rd INTERNATIONAL SYMPOSIUM ON NAVAL ARCHITECTURE AND MARITIME, İstanbul, Türkiye, 24 - 25 Nisan 2018, ss.175-184, (Tam Metin Bildiri)

Mechanical Properties of Friction Stir Welded Dissimilar Structural Steels

KÜÇÜKÖMEROĞLU T., AKTARER S. M., SEKBAN D. M., İpekoğlu G., Çam G.
European Congress and Exhibition on Advanced Materials and Process (EUROMAT 2017), Selanik, Yunanistan, 18 - 22 Eylül 2017, ss.9, (Tam Metin Bildiri)

Joining of Marine Steels by Severe Plastic Deformation-Induced Friction Stir Welding

SEKBAN D. M., PÜRÇEK G., AKTARER S. M., KÜÇÜKÖMEROĞLU T.
European Congress and Exhibition on Advanced Materials and Process (EUROMAT 2017), Selanik, Yunanistan, 18 - 22 Eylül 2017, ss.5, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Microstructure and Mechanical Properties of Fine-Grained Dual Phase 800 Steel Processed by Friction Stir Processed

Aktarer S. M., Küçükömeroğlu T., Sekban D. M., Pürçek G.
European Congress and Exhibition on Advanced Materials and Process (EUROMAT 2017), Thessaloniki, Yunanistan, 18 - 22 Eylül 2017, ss.11, (Tam Metin Bildiri)

Improvement the wear behavior of low carbon steels by friction stir processing

SEKBAN D. M., AKTARER S. M., YANAR H., Alsaran A., PÜRÇEK G.
13th International Conference on Tribology (ROTRIB), Galati, Romanya, 22 - 24 Eylül 2016, (Tam Metin Bildiri) identifier identifier

Impact Toughness of Friction Stir Processed Low Carbon Steel

SEKBAN D. M., AKTARER S. M., MA Z. Y., PÜRÇEK G.
1. Uluslararası Gemi ve Deniz Teknolojisi Kongresi (GMO-SHIPMAR 2016), İstanbul, Türkiye, 8 - 09 Aralık 2016, ss.1-8, (Tam Metin Bildiri)

Microstructural Evolution Of Friction Stir Processed Low Carbon Steels

SEKBAN D. M., AKTARER S. M., KÜÇÜKÖMEROĞLU T., PÜRÇEK G.
16. International Material Symposium (IMSP'2016), Denizli, Türkiye, 12 - 14 Ekim 2016, ss.205, (Tam Metin Bildiri)

Combined Effect of Heat Treatment and Friction Stir Processing on the Microstructure and Mechanical Properties of Low Carbon Steels Used in Shipbuilding

SEKBAN D. M., AKTARER S. M., PÜRÇEK G.
18th Metallurgy and Materials Congress (IMMC 16), İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.3, (Tam Metin Bildiri)

Improvement the Wear Behavior Of Low Carbon Steels By Friction Stir Processing

SEKBAN D. M., AKTARER S. M., YANAR H., Alsaran A., PÜRÇEK G.
The 13th International Conference on Tribology (ROTRIB'16), Galati, Romanya, 22 - 24 Eylül 2016, ss.4, (Tam Metin Bildiri)

Effect of friction stir processing on tribologial properties of Al-Si alloy

AKTARER S. M., SEKBAN D. M., YANAR H., PÜRÇEK G.
The 13th International Conference on Tribology (ROTRIB'16), Galati, Romanya, 22 - 24 Eylül 2016, ss.5, (Tam Metin Bildiri)

The Effect of Process Parameters on Microstructural Properties of Severe Plastically Deformed Dual Phase 600 Steel Via Friction Stir Processes

Aktarer S. M., SEKBAN D. M., KÜÇÜKÖMEROĞLU T.
13th Junior EUROMAT 2016, Lausanne, İsviçre, 10 - 14 Temmuz 2016, cilt.1, sa.1, ss.53, (Özet Bildiri)

Formability of Friction Stir Processed Dual Phase 600 Steel

SEKBAN D. M., Aktarer S. M., KÜÇÜKÖMEROĞLU T.
13th Junior EUROMAT 2016, Lausanne, İsviçre, 10 - 14 Temmuz 2016, cilt.1, sa.1, ss.26, (Özet Bildiri)

Formability of IF-Steel Sheets Severe Plastically Deformed by Friction-Stir Processing

SEKBAN D. M., AKTARER S. M., SARAY O., KUCUKOMEROGLU T., PURCEK G.
IISS 15, Karabük, Türkiye, 1 - 03 Nisan 2015, ss.425-429, (Tam Metin Bildiri)

’Effect of Friction-Stir Processing on the Structure and Mechanical Properties of a Low Carbon Steel Used in Ship Panel Construction

SEKBAN D. M., PURCEK G., AKTARER S. M., KUCUKOMEROGLU T.
IISS 15, Karabük, Türkiye, 1 Nisan - 03 Temmuz 2015, ss.81-84, (Tam Metin Bildiri)

Enhancements in mechanical properties of friction stir processed eutectic Al-12Si alloy

AKTARER S. M., SEKBAN D. M., SARAY O., KÜÇÜKÖMEROĞLU T., PÜRÇEK G.
NanoSPD-6 (Nanomaterials by Severe Plastic Deformation), Metz, Fransa, 30 Haziran - 04 Temmuz 2014, ss.4, (Özet Bildiri)

Köpük Dolgulu Tüp Monte Edilmiş Bir Kompozit Teknede Oluşan Ek Darbe Direnci ve Denizcilik Analizi

SEKBAN D. M., KÖSE E., ÖLMEZ H.
Gemi İnşaatı ve Deniz Teknolojisi Teknik Kongresi, İstanbul, Türkiye, 13 - 14 Aralık 2012, ss.121-130, (Tam Metin Bildiri)

Gemilerin yapısal modelleme ve analizlerinin sonlu elemanlar yöntemi ile gerçekleştirilmesi

ÖLMEZ H., PEŞMAN E., SEKBAN D. M.
Gemi İnşaatı ve Deniz Teknolojisi Teknik Kongresi 2012, İstanbul, Türkiye, 13 - 14 Aralık 2012, ss.355-364, (Tam Metin Bildiri)
Metrikler

Yayın

53

Atıf (WoS)

493

H-İndeks (WoS)

13

Atıf (Scopus)

555

H-İndeks (Scopus)

13

Atıf (Scholar)

96

H-İndeks (Scholar)

3

Proje

5

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları