Prof. SULTAN ÖZTÜRK

Publication Network

Journal articles indexed in SCI, SSCI, and AHCI

The production of binary Mg-Ni alloys and ternary Mg-Ni-based alloys: The structural and corrosion properties

Sünbül S. E., İÇİN K., Aydoğdu H. M., ÖZTÜRK S.

Journal of Alloys and Compounds , vol.1011, 2025 (SCI-Expanded)

The magnetic field sensing performance of FeCo-based soft magnetic alloys with varying Fe/Co ratio

Can H., İÇİN K., Akyol S., Topal U., ÖZTÜRK S., Sözeri H.

JOURNAL OF ALLOYS AND COMPOUNDS , vol.966, 2023 (SCI-Expanded)

A comparative study of the correlation among the phase formation, crystal stability and magnetic properties of SrFe12-xMxO19 (M=Al3+, Cr3+and Mn3+, x=0-0.5) ferrite permanent magnets

İÇİN K., Akyol S., Alptekin F., YILDIZ A., SÜNBÜL S. E., ERGİN İ., et al.

JOURNAL OF SOLID STATE CHEMISTRY , vol.324, 2023 (SCI-Expanded) Sustainable Development

Theoretical and experimental study of the titanium substituted Mg2-xTixNi alloys and Mg2-xTixNiH4 hydrides

SÜNBÜL S. E., İÇİN K., Mamula B. P., Radakovic J., ÖZTÜRK S., Batalovic K.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , vol.48, no.48, pp.18352-18365, 2023 (SCI-Expanded) Sustainable Development

Effect of Co, Cu, and Mo alloying metals on electrochemical and magnetic properties of Fe-B alloy

SÜNBÜL S. E., Akyol S., Onal S., ÖZTÜRK S., Sozeri H., İÇİN K.

JOURNAL OF ALLOYS AND COMPOUNDS , vol.947, 2023 (SCI-Expanded)

Effect of proton irradiation on the performance of fluxgate sensors

İÇİN K., Can H., Akyol S., Kiceci P. U., Topal U., oeztuerk S., et al.

JOURNAL OF ALLOYS AND COMPOUNDS , vol.941, 2023 (SCI-Expanded)

Investigation of nano-crystaline strontium hexaferrite magnet powder from mill scale waste by the mechanochemical synthesis: Effect of the annealing temperature

İçin K., Öztürk S., Çakıl D. D., Sünbül S. E., Ergin İ., Özçelik B.

MATERIALS CHEMISTRY AND PHYSICS , vol.290, 2022 (SCI-Expanded)

Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy

ÖZTÜRK S., Alptekin F., Onal S., SÜNBÜL S. E., ŞAHİN Ö., İÇİN K.

JOURNAL OF ALLOYS AND COMPOUNDS , vol.903, 2022 (SCI-Expanded)

Effect of the Mn Amount on the Structural, Thermal, and Magnetic Properties of Rapidly Solidified (87-x)Cu-13Al-xMn (wt.%) Alloy Ribbons

SÜNBÜL S. E., İÇİN K., Eroglu M., ÖZTÜRK S.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.31, no.4, pp.2761-2769, 2022 (SCI-Expanded)

Investigation and characterization of high purity and nano-sized SrCO3 production by mechanochemical synthesis process

İÇİN K., ÖZTÜRK S., SÜNBÜL S. E.

CERAMICS INTERNATIONAL , vol.47, no.23, pp.33897-33911, 2021 (SCI-Expanded)

Mechanochemical synthesis of SrFe12O19 from recycled mill scale: Effect of synthesis time on phase formation and magnetic properties

Icina K., Ozturka S., Cakila D. D., Sunbula S. E.

JOURNAL OF ALLOYS AND COMPOUNDS , vol.873, 2021 (SCI-Expanded)

Determination of structural, tribological, isothermal oxidation and corrosion properties of Al?Co?Cr?Fe?Ni?Ti?Cu high-entropy alloy

SÜNBÜL S. E., İÇİN K., Seren F. Z., ŞAHİN Ö., ÇAKIL D. D., SEZER R., et al.

VACUUM , vol.187, 2021 (SCI-Expanded)

Characterisation of nickel-aluminium bronze powders produced by the planar flow casting method

ÖZTÜRK S., SÜNBÜL S. E., Metoglu A., Onal S., İÇİN K.

MATERIALS SCIENCE AND TECHNOLOGY , vol.36, no.16, pp.1771-1784, 2020 (SCI-Expanded)

Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method

ÖZTÜRK S., SÜNBÜL S. E., Metoglu A., İÇİN K.

TRIBOLOGY INTERNATIONAL , vol.151, 2020 (SCI-Expanded)

Structural and Hydrogen Storage Properties of Mg60-Ni40 and Mg80-Ni20 Alloys Prepared by Planar Flow Casting

SÜNBÜL S. E., ÖZTÜRK S., İÇİN K.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.29, no.9, pp.6101-6107, 2020 (SCI-Expanded)

Effect of the stoichiometric ratio on phase evolution and magnetic properties of SrFe12O19 produced with mechanochemical process using mill scale

İçi̇n K., ÖZTÜRK S., ÇAKIL D. D., SÜNBÜL S. E.

CERAMICS INTERNATIONAL , vol.46, no.9, pp.14150-14160, 2020 (SCI-Expanded)

Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons

ÖZTÜRK S., İÇİN K., GENCTURK M., GÖBÜLÜK M., SVEC P.

JOURNAL OF NON-CRYSTALLINE SOLIDS , vol.527, 2020 (SCI-Expanded)

Surface and structural characterization of amorphous Fe,Co-based melt-spun ribbons subjected to heat treatment processes

ÖZTÜRK S., İÇİN K., GENCTURK M., GÖBÜLÜK M., TOPAL U., SVEC P.

JOURNAL OF NON-CRYSTALLINE SOLIDS , vol.522, 2019 (SCI-Expanded)

The Role of Wheel Surface Quality on Structural and Hard Magnetic Properties of Nd-Fe-B Permanent Magnet Powders

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Karaagac O., Kockar H.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , vol.31, no.9, pp.3025-3041, 2018 (SCI-Expanded)

Oxidation, electrical and mechanical properties of Crofer (R) 22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy

ÖZTÜRK B., TOPCU A., ÖZTÜRK S., CORA Ö. N.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , vol.43, no.23, pp.10822-10833, 2018 (SCI-Expanded)

Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Odabasi H. K., GÖBÜLÜK M., et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , no.10, pp.5017-5030, 2017 (SCI-Expanded)

Effects of Different Kinds of Fibers on Mechanical and Tribological Properties of Brake Friction Materials

ÖZTÜRK B., ARSLAN F., ÖZTÜRK S.

TRIBOLOGY TRANSACTIONS , vol.56, no.4, pp.536-545, 2013 (SCI-Expanded)

Effect of Type and Relative Amount of Solid Lubricants and Abrasives on the Tribological Properties of Brake Friction Materials

Öztürk B., Öztürk S., Adigüzel A. A.

TRIBOLOGY TRANSACTIONS , no.3, pp.428-441, 2013 (SCI-Expanded)

Characteristics of rapidly solidified Cu-10%Sn alloy powders produced by water jet cooled rotating disc atomisation

ÖZTÜRK S., ÖZTÜRK B., USTA G.

POWDER METALLURGY , vol.54, no.5, pp.577-584, 2011 (SCI-Expanded)

Production of rapidly solidified Cu-Sn ribbons by water jet cooled rotating disc method

ÖZTÜRK S., ÖZTÜRK B., ERDEMİR F., USTA G.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.211, no.11, pp.1817-1823, 2011 (SCI-Expanded)

Production of bronze powders by water jet cooled rotating disc atomisation

ÖZTÜRK S., USTA G., ÖZTÜRK B.

POWDER METALLURGY , vol.54, no.3, pp.393-399, 2011 (SCI-Expanded)

Effects of Resin Type and Fiber Length on the Mechanical and Tribological Properties of Brake Friction Materials

ÖZTÜRK B., ÖZTÜRK S.

TRIBOLOGY LETTERS , vol.42, no.3, pp.339-350, 2011 (SCI-Expanded)

Effect of Fiber Loading on the Mechanical Properties of Kenaf and Fiberfrax Fiber-reinforced Phenol-Formaldehyde Composites

Ozturk S.

JOURNAL OF COMPOSITE MATERIALS , vol.44, no.19, pp.2265-2288, 2010 (SCI-Expanded)

Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials

Ozturk B., ARSLAN F., Ozturk S.

TRIBOLOGY INTERNATIONAL , vol.40, no.1, pp.37-48, 2007 (SCI-Expanded)

The effect of fibre content on the mechanical properties of hemp and basalt fibre reinforced phenol formaldehyde composites

Ozturk S.

JOURNAL OF MATERIALS SCIENCE , vol.40, no.17, pp.4585-4592, 2005 (SCI-Expanded)

Effect of process parameters on production of metal powders by water jet cooled rotating disc atomisation

Ozturk S., ARSLAN F., OZTURK B.

POWDER METALLURGY , vol.48, no.2, pp.163-170, 2005 (SCI-Expanded)

Effect of production parameters on cooling rates of AA2014 alloy powders produced by water jet cooled, rotating disc atomisation

Ozturk S., ARSLAN F., OZTURK B.

POWDER METALLURGY , vol.46, no.4, pp.342-348, 2003 (SCI-Expanded)

Rotating disc production of aluminum alloy ribbon

ARSLAN F., Ozturk S., OZTURK B.

INTERNATIONAL JOURNAL OF POWDER METALLURGY , vol.39, no.2, pp.53-62, 2003 (SCI-Expanded)

Production of rapidly solidified metal powders by water cooled rotating disc atomisation

Ozturk S., ARSLAN F.

POWDER METALLURGY , vol.44, no.2, pp.171-176, 2001 (SCI-Expanded)

Articles Published in Other Journals

Production of AA 2024 Aluminum Alloy Ribbons by Melt Spinning Process

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.

Turkish Journal of Electromechanics & Energy , no.2, pp.14-19, 2017 (Peer-Reviewed Journal)

Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

International Journal of Materials Science and Applications , vol.6, no.5, pp.241-249, 2017 (Peer-Reviewed Journal)

Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

International Journal of Materials Science and Applications , vol.6, no.5, pp.241-249, 2017 (Peer-Reviewed Journal)

Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

International Journal of Materials Science and Applications , vol.6, no.5, pp.241-249, 2017 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences

Stronsiyum Hekzaferrit Mıknatıslarda Krom İkamesinin Etkisi

ÖZÇELİK İ. C., ÖZTÜRK S.

2. ULUSLARARASI BİLİMSEL ARAŞTIRMALAR VE İNOVASYON KONGRESİ, Adana, Turkey, 16 - 18 December 2024, (Full Text)

Stronsiyum Hekzaferrit Mıknatıslarda Alüminyum İkamesinin Etkisi

ÖZÇELİK İ. C., ÖZTÜRK S.

2. ULUSLARARASI BİLİMSEL ARAŞTIRMALAR VE İNOVASYON KONGRESİ, Adana, Turkey, 16 - 18 December 2024, (Full Text)

Parçacık Boyutunun Stronsiyum Hekzaferrit Mıknatısların Manyetik Özellikler Üzerindeki Etkisi

ÇAKIL D. D., İÇİN K., ÖZTÜRK S.

The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Turkey, pp.298, (Full Text)

Ti Katkılı NdFeB Kalıcı Mıknatıs Tozların Üretimi

ÖZTÜRK S., İÇİN K.

The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Turkey, pp.394, (Full Text)

Nikelin Fe-Nd-B Esaslı Kalıcı Mıknatısların Özellikleri Üzerindeki Etkisi

ÖZTÜRK S., İÇİN K.

The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Turkey, pp.389, (Full Text)

Hydrogenation Behavior and Microstructure Evolution of Intermetallic Mg2Ni Alloy Produced by Vacuum Arc Melting

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., BEYAZIT G., ÖZCAN Ş.

4th International Hydrogen Technologies Congress, Edirne, Turkey, 20 - 23 June 2019, pp.172-175, (Full Text)

Characterization of Hydrogen Storable Properties of Mg-Ni Alloy Ribbons Produced by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., BEYAZIT G., ÖZCAN Ş.

4th International Hydrogen Technologies Congress, Edirne, Turkey, 20 - 23 June 2019, pp.131-134, (Full Text)

Investigation of Hydriding and Thermal Properties of Near Eutectic Mg-Ni Alloy Fabricated by Rapid Solidification Process

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., BEYAZIT G., ÖZCAN Ş.

4th International Hydrogen Technologies Congress, Edirne, Turkey, 20 - 23 June 2019, pp.164-167, (Full Text)

SOĞUMA HIZININ Al-Ni BRONZU ŞERİTLERİN VE TOZLARIN YAPISAL VE MEKANİK ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

ÖZTÜRK S., METOĞLU A., SÜNBÜL S. E., İCİN K.

3rd International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), Nevşehir, Turkey, 17 - 19 September 2018, (Full Text)

MELT SPINNING YÖNTEMİYLE ÜRETİLEN CuAl10Ni5Fe4 ALAŞIM TOZLARININ YAPISAL İNCELENMESİ

ÖZTÜRK S., METOĞLU a., SÜNBÜL S. E., İCİN K.

3rd International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), Nevşehir, Turkey, 17 - 19 September 2018, (Full Text)

Preparation of SrFe12O19 Powders with Mechanosynthesis method

ÖZTÜRK S., Çakıl D. D., İCİN K., SEZER R., Topal U., ÖZTÜRK B.

6th International Conference on Superconductivity and Magnetisim, 29 April - 04 May 2018, no.1, pp.422, (Summary Text)

The Influence of milling Media on Structural and Magnetic properties of Strontium Hexaferrite Powders

ÖZTÜRK S., ÇAKIL D. D., İCİN K., SEZER R., TOPAL U., ÖZTÜRK B.

6th International Conference on Superconductivity and Magnetisim, Antalya, Turkey, 29 April - 04 May 2018, vol.6, no.1, pp.482, (Full Text)

Production of Rapidly Solidified Mg Based Alloy Ribbons by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., BEYAZIT G., ÖZCAN Ş.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018, vol.1, no.1, pp.142, (Summary Text)

Importance of Microstructure and Powder Size on The Magnetic Features of Nd15Fe77B8 Spherical Shaped Powder

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018, vol.1, no.1, pp.112, (Summary Text)

Co Katkılı Nd15Fe76Co2B8 Manyetik Alaşımın Yapısal ve Fiziksel Özelliklerinin İncelenmesi

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018, vol.1, no.1, pp.113-114, (Summary Text)

Investigation of Hydriding Properties of Mg80-Ni20 Alloy Ribbons Produced by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., BEYAZIT G., ÖZCAN Ş.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018, vol.1, no.1, pp.143, (Summary Text)

Mg60Ni40 ALLOY SYNTHESIS AND INVESTIGATION OF HYDROGEN STORAGE PROPERTIES

BAYAZİT G., SÜNBÜL S. E., ÖZTÜRK S., İCİN K., ÖZCAN Ş.

3rd International Hydrogen Technologies Congress (IHTEC2018), Antalya, Turkey, 15 - 18 March 2018, (Full Text)

Effect of Deformation Rate on Electrical and Mechanical Properties of Pure Copper

ÖZTÜRK B., İCİN K., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 21 - 23 October 2017, pp.917-923, (Full Text)

Analytical Hierarchy Process in Material Selection

ÖZTÜRK B., İCİN K., Şahin Ö., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 21 - 23 October 2017, pp.693-700, (Full Text)

Magnetic Behaviours of Dendritically Solidified Spherical NdFeB Powders and Surfactant-Active Ball Milled Particles

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.

2nd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 21 - 23 October 2017, pp.1281-1293, (Full Text)

THE EFFECT OF Mn AMOUNT ON THE SHAPE MEMORY PROPERTIES OF CuAlMn RIBBONS PRODUCED BY MELT SPINNING METHOD

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Turkey, 11 - 13 October 2017, pp.67-72, (Full Text)

MICROSTRUCTURAL INVESTIGATION OF RAPIDLY SOLIDIFIED Cu(100-x)Al13Mnx (x=1-14) RIBBONS

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17),, Nevşehir, Turkey, 11 - 13 October 2017, pp.187-192, (Full Text)

Effects of Tin on the Mechanical and Tribological Properties of Titanium-Based Implant Materials

ÖZTÜRK B., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017, pp.456-464, (Full Text)

Melt Spinning Yöntemiyle CuAlMn Şeritlerin Üretimi ve Manyetik Özelliklerinin İncelenmesi

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., GÖLBAŞI Z., İCİN K., ÖZTÜRK B.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017, (Full Text)

Production Of AA2024 Aluminum Alloy Ribbons By Melt Spinning Process

Öztürk S., Sünbül S. E., Gölbaşı Z., İcin K., Öztürk B.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017, (Full Text)

Effects of Tin on the Mechanical and Tribological Preoperties of Titanium-Based Implant Materials

ÖZTÜRK B., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Turkey, 21 - 23 September 2017, pp.512-520, (Full Text)

Effect of Wheel Cooling on Magnetic Propeties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN ODABAŞI H.

4th international conference on materials science and nanotechnology for next generation, Sarajevo, Bosnia And Herzegovina, 28 - 30 June 2017, pp.61, (Summary Text)

Effect of Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

4Th International Conference On Materials Science And Nanotechnology For Next Generation, Saraybosna, Bosnia And Herzegovina, 28 - 30 June 2017, pp.63, (Full Text)

The Influence Of Solidification Rate On Hard Magnetic Properties Rare-Earth Permanent Magnetic Powder

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

4Th International Conference On Materials Science And Nanotechnology For Next Generation, Saraybosna, Bosnia And Herzegovina, 28 - 30 June 2017, pp.62, (Full Text)

Bonding Strength and Fuel Leakage Tests for Crofer®22 APU Solid Oxide Fuel Cell Interconnects

ÖZTÜRK B., TOPCU A., ÖZTÜRK S., CORA Ö. N.

International Hydrogen Technologies Congress (IHTEC2017, 15 - 18 March 2017, (Full Text)

Bonding Strength and Fuel Leakage Tests for Crofer®22 Solid Oxide Fuel Cell Metallic Interconnects”,, ADANA, TÜRKIYE, 15-18 Mart 2017, pp.287-293

ÖZTÜRK B., TOPCU A., ÖZTÜRK S., CORA Ö. N.

Second International Hydrogen Technologies Congress, Adana, Turkey, 15 - 18 March 2017, pp.287-293, (Full Text)

Bonding Strength and Fuel Leakage Tests for Crofer®22 Solid Oxide Fuel Cell Metallic Interconnects

ÖZTÜRK B., TOPCU A., ÖZTÜRK S., CORA Ö. N.

Second International Hydrogen Technologies Congress, Adana, Turkey, 15 - 18 March 2017, pp.287-293, (Full Text)

Improvement Of Magnetic Propertıes Of Melt Spun Produced Nd2fe14b Particles During Surfactant Assisted Ball Milling

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

International Energy & Engineering Conference, 13 - 14 October 2016, (Full Text)

Hızlı Katılaştırılmış Nd Fe B Sert Manyetik Tozların Yapısal Termal Ve Manyetik Karakterizasyonu

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

Internatıonal Energy & Engineering Conference, 13 October 2016, (Full Text)

STRUCTURAL THERMAL AND MAGNETİC CHARACTERIZATION OF RAPIDLY SOLIDIFIED Nd Fe B HARD MAGNETİC ALLOY POWDER

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN ODABAŞI H.

INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Turkey, 13 - 14 September 2016, pp.67-80, (Full Text)

HIZLI KATILAŞTIRILMIŞ Nd-Fe-B SERT MANYETİK TOZLARIN YAPISAL,TERMAL VE MANYETİK KARAKTERİZASYONU

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., KAFTELEN H.

INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Turkey, 13 - 14 October 2016, pp.68-81, (Full Text)

IMPROVEMENT OF MAGNETIC PROPERTIES OF MELT-SPUN PRODUCED Nd2Fe14B PARTICLES DURING SURFACTANT-ASSISTED BALL MILLING

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN H.

INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Turkey, 13 - 14 October 2016, pp.220-227, (Full Text)

MELT SPİNNİNG METODUYLA AA6060 ALUMINYUM ALAŞIMI TOZ ÜRETİMİNİN İNCELENMESİ

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., EROĞLU M.

International Conference on Material Science and Technology, 6 - 08 April 2016, (Full Text)

MELT SPINNING YÖNTEMİYLE AA6060 ALÜMİNYUM ALAŞIMI ŞERİT ÜRETİMİ VE İNCELENMESİ

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., EROĞLU M.

International Conferance on Materials Science and Technology in Cappadocia, Nevşehir, Turkey, 6 - 08 April 2016, pp.440-444, (Full Text)

MELT SPİNNİNG YÖNTEMİYLE NdFeB MANYETİK TOZLARIN ÜRETİMİ VE KARAKTERİZASYONU

ÖZTÜRK S., İCİN K., KAFTELEN H., ÖZTÜRK B., TOPAL U., METOĞLU A.

International Conference on Material Science and Technology, Nevşehir, Turkey, 6 - 08 April 2016, pp.428-433, (Full Text)

EFFECT OF PRODUCTION PARAMETERS ON PHYSICAL PROPERTIES OF THE INTERCONNECT PLATES PRODUCED BY POWDER METALLURGY

ÖZTÜRK B., CORA Ö. N., ÖZTÜRK S., BAKAL A., TOPCU A.

International Conference on Material Science and Technology in Cappadocia (IMSTEC 2016), Nevşehir, Turkey, 6 - 08 April 2016, pp.832-837, (Full Text)

TOZ METALURJİSİ ÜRETİM PARAMETRELERİNİN İNTERKONNEKTÖR PLAKALARIN FİZİKSEL ÖZELLİKLERİNE ETKİSİ

ÖZTÜRK B., CORA Ö. N., ÖZTÜRK S., BAKAL A., TOPCU A.

International Conference on Material Science and Technology, 06 April 2016, (Full Text)

PRODUCTION OF AA7075 ALUMINIUM ALLOY RIBBONS BY MELT SPINNING METHOD

ÖZTÜRK S., METOĞLU A., İCİN K., ÖZTÜRK B.

International Porous Powder Materials Symposiım and Exhibition, İzmir, Turkey, 15 - 18 September 2015, pp.141-145, (Full Text)

INVESTIGATION OF THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF Ti-6Al-XNbALLOYS

Öztürk B., Gölbaşı Z., Cora Ö. N., ÖZTÜRK S.

International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.323-328, (Full Text)

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Turkey, 24 June 2014 - 28 June 2015, pp.78-79, (Full Text)

Investigation of Production of Rapidly Solidified 304 Stainless Steel Ribbons by Melt Spinning Method

ÖZTÜRK S., İCİN K., KAFTELEN H., ÖZTÜRK B., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.62-63, (Full Text)

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Turkey, 24 June 2014 - 28 June 2015, pp.78-79, (Full Text)

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Turkey, 24 June 2014 - 28 June 2015, pp.78-79, (Full Text)

Toz Metalurjisi Yöntemi ile Üretilen İnterkonnektör Plakaların Üretim Parametrelerinin Gözeneklilik ve Isıl Genleşme Katsayılarına Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Turkey, 24 - 28 June 2014, pp.80-81, (Full Text)

HIZLI KATILAŞTIRILMIŞ MONEL 400 TOZUNUN PRESLENMDAVRANIŞININ İNCELENMESİ

ÖZTÜRK S., ÖZTÜRK B., ERDEMİR F., PALACI Y.

6th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 5 - 07 October 2011, (Full Text)

Sinterleme parametrelerinin moNel 400 alaşımı tozundanüretilmiş parçalarIn mekanik özellklerine etkisi

ÖZTÜRK S., ÖZTÜRK B., ERDEMİR F., PALACI Y.

6th International Powder Metallurgy Conference, 5 - 07 October 2011, (Full Text)

Metrics

Publication

Citation (WoS)

651

H-Index (WoS)

Citation (Scopus)

801

H-Index (Scopus)

Citation (Scholar)

223

H-Index (Scholar)

Project

Intellectual Property

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works

Publication

Citation (WoS)

H-Index (WoS)

Citation (Scopus)

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Project

Intellectual Property

Thesis Advisory

Open Access