Doç. Dr. FATİH ERDEMİR

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Development of Highly Sensitive Voltammetric Methods for the Determination of Antihistamine Drug Cetirizine Using A Poly(Bromocresol Purple) Film-Based Electrochemical Sensor

Sofu U., ÖZTÜRK G., REİS H. A., ERDEMİR F., KUL D.

ANALYTICAL LETTERS , 2024 (SCI-Expanded)

Evolution of Morphology, Particle Size and Oxidation Resistance of Recycled Ti-6Al-4V Powders Prepared by Planetary Ball Milling

VAROL T., Ömür F. D., AKÇAY S. B., GÜLER O., ERDEMİR F.

Arabian Journal for Science and Engineering , 2024 (SCI-Expanded)

Experimental analysis of anodic coating process parameters of Al 5754 alloy by response surface method

Celik I., ERDEMİR F., Coruhlu I.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , cilt.11, sa.2, 2023 (SCI-Expanded)

SS316L/Al2O3 functionally graded material for potential biomedical applications

Canpolat Ö., Çanakçı A., Erdemir F.

Materials Chemistry and Physics , cilt.293, 2023 (SCI-Expanded)

Effect of fuel type on pseudocapacitance behaviour of CuO nanoparticles synthesized by solution combustion method

BİLGİN S., ALVER Ü., ERDEMİR F., ÇANAKÇI A.

BULLETIN OF MATERIALS SCIENCE , cilt.45, sa.4, 2022 (SCI-Expanded)

Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.

SILICON , cilt.14, sa.14, ss.8567-8579, 2022 (SCI-Expanded)

Evaluation of microstructure, mechanical, and corrosion properties of SS316L/Al2O3 composites produced by hot pressing

CANPOLAT Ö., ÇANAKÇI A., ERDEMİR F.

MATERIALS CHEMISTRY AND PHYSICS , cilt.280, 2022 (SCI-Expanded)

Electroless nickel-phosphorus coated expanded graphite paper: Binder-free, ultra-thin, and low-cost electrodes for high-performance supercapacitors

ERDEMİR F., GÜLER O., Canakc A.

JOURNAL OF ENERGY STORAGE , cilt.44, 2021 (SCI-Expanded)

Influence of fluorine doping of zinc oxide on its electrochemical performance in supercapacitors

ERDEMİR F., Tuzcu E., BİLGİN S., ALVER Ü., ÇANAKÇI A.

MATERIALS CHEMISTRY AND PHYSICS , cilt.259, 2021 (SCI-Expanded)

Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool

Bilgin S., Güler O., Alver Ü., Erdemir F., Aslan M., Çanakçı A.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.57, sa.1, ss.263-273, 2021 (SCI-Expanded)

Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.845, 2020 (SCI-Expanded)

Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites

KARABACAK A. H., Çanakçı A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.5, ss.416-423, 2020 (SCI-Expanded)

Synthesis of SiC nanoparticles by central composite design response surface methodology directed mechanical milling

ERDEMİR F., VAROL T., ÇANAKÇI A.

MICRO & NANO LETTERS , cilt.15, sa.3, ss.187-190, 2020 (SCI-Expanded)

Effect of Operating Light Exposure on Enamel Bonding Performances of Universal Adhesives

Ayar M. K., ERDEMİR F.

MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.26, sa.3, ss.352-357, 2020 (SCI-Expanded)

Effect of nano alumina content on corrosion behavior and microstructure of Za27/graphite/alumina hybrid nanocomposites

GÜLER O., ERDEMİR F., ÇELEBİ M., Cuvalc H., Canak A.

RESULTS IN PHYSICS , cilt.15, 2019 (SCI-Expanded)

Repair of aged bulk-fill composite with posterior composite: Effect of different surface treatments

Ayar M. K., Guven M. E., BURDUROĞLU H. D., ERDEMİR F.

JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY , cilt.31, sa.3, ss.246-252, 2019 (SCI-Expanded)

Enhancement of Wear and Corrosion Resistance of ZA27/Nanographene Composites Produced by Powder Metallurgy

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., ÇUVALCI H., KARABACAK A. H.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.44, sa.2, ss.1437-1445, 2019 (SCI-Expanded)

Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites

VAROL T., ÇANAKÇI A., ÖZKAYA S., ERDEMİR F.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.3, ss.312-323, 2018 (SCI-Expanded)

Artificial neural network-based prediction technique for coating thickness in Fe-Al coatings fabricated by mechanical milling

VAROL T., ÇANAKÇI A., ÖZŞAHİN Ş., ERDEMİR F., ÖZKAYA S.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.6, ss.742-750, 2018 (SCI-Expanded)

Study on particle size and X-ray peak area ratios in high energy ball milling and optimization of the milling parameters using response surface method

ERDEMİR F.

Measurement: Journal of the International Measurement Confederation , cilt.112, ss.53-60, 2017 (SCI-Expanded)

Bonding performance of universal adhesives to er,cr:YSGG laser-irradiated enamel

Ayar M. K., ERDEMİR F.

Microscopy Research and Technique , cilt.80, sa.4, ss.387-393, 2017 (SCI-Expanded)

Paste backfill of high-sulphide mill tailings using alkali-activated blast furnace slag: Effect of activator nature, concentration and slag properties

CİHANGİR F., ERÇIKDI B., KESİMAL A., DEVECİ H., ERDEMİR F.

MINERALS ENGINEERING , cilt.83, ss.117-127, 2015 (SCI-Expanded)

Corrosion and wear behavior of functionally graded Al2024/SiC composites produced by hot pressing and consolidation

ERDEMİR F., ÇANAKÇI A., VAROL T., ÖZKAYA S.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.644, ss.589-596, 2015 (SCI-Expanded)

Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.22, sa.4, ss.425-432, 2015 (SCI-Expanded)

Synthesis and characterization of hybrid nanocomposite powders via mechanical alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.1, ss.67-72, 2015 (SCI-Expanded)

New Coating Technique for Al-B4C Composite Coatings by Mechanical Milling and Composite Coating

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, sa.11-12, ss.672-679, 2015 (SCI-Expanded)

NEW COATING TECHNIQUE FOR Al–B4C COMPOSITE COATINGS BY MECHANICAL MILLING AND COMPOSITE COATING

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

POWDER METALLURGY AND METAL CERAMICS , ss.672-678, 2015 (SCI-Expanded)

Synthesis and Characterization of Hybrid Nanocomposite powders via Mechanical Alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , sa.45, ss.67-72, 2015 (SCI-Expanded)

SYNTHESIS AND CHARACTERIZATION OF HYBRID NANOCOMPOSITE POWDERS VIA MECHANICAL ALLOYING

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S.

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS , cilt.45, sa.1, ss.67-72, 2015 (SCI-Expanded)

Effects of a new pre-milling coating process on the formation and properties of an Fe-Al intermetallic coating

ÇANAKÇI A., ERDEMİR F., VAROL T., Dalmis R., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.268, ss.110-117, 2014 (SCI-Expanded)

Effect of process parameters on the formation of Fe-Al intermetallic coating fabricated by mechanical alloying

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.21, sa.6, ss.595-600, 2014 (SCI-Expanded)

Microstructure and Abrasive Wear Behavior of CuSn10-Graphite Composites Produced by Powder Metallurgy

ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

POWDER METALLURGY AND METAL CERAMICS , cilt.53, ss.275-287, 2014 (SCI-Expanded)

Microstructure and properties of Fe-Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying

ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S., Mindivan H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.73, ss.849-858, 2014 (SCI-Expanded)

Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying

ÇANAKÇI A., VAROL T., ÇUVALCI H., ERDEMİR F., ÖZKAYA S., YALÇIN E. D.

MICRO & NANO LETTERS , cilt.9, sa.2, ss.109-112, 2014 (SCI-Expanded)

Determining the effect of process parameters on particle size in mechanical milling using the Taguchi method: Measurement and analysis

ÇANAKÇI A., ERDEMİR F., VAROL T., Patir A.

MEASUREMENT , cilt.46, sa.9, ss.3532-3540, 2013 (SCI-Expanded)

Formation of Fe-Al intermetallic coating on low-carbon steel by a novel mechanical alloying technique

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.247, ss.24-29, 2013 (SCI-Expanded)

Production of rapidly solidified Cu-Sn ribbons by water jet cooled rotating disc method

ÖZTÜRK S., ÖZTÜRK B., ERDEMİR F., USTA G.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.211, sa.11, ss.1817-1823, 2011 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Wear and Mechanical Behavior of ZA27 Alloy Reinforced with B4C Produced by Powder Metallurgy Method

Yalçın E. D., Çanakçı A., Erdemir F.

GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.35, sa.4, ss.1572-1583, 2022 (ESCI) Sürdürülebilir Kalkınma

Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology

Suresh K. S., ERDEMİR F., VAROL T., Kumaran S t., Uthayakumar M., ÇANAKÇI A.

International Journal of Lightweight Materials and Manufacture , cilt.3, sa.2, ss.127-135, 2020 (Scopus)

Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology

Kumar S. S., ERDEMİR F., VAROL T., Thirumalai K. S., Uthayakumar M., ÇANAKÇI A.

International Journal of Lightweight Materials and Manufacture , cilt.3, sa.2, ss.127-135, 2020 (Scopus)

The effects of cavity disinfection on the nanoleakage of compomer restorations: an in vitro study

Arslan I., Baygın Ö., Tüzüner T., Erdemir F., Çanakçı A., Korkmaz F. M.

EUROPEAN ORAL RESEARCH , cilt.54, ss.16-24, 2020 (ESCI)

The influence of process parameters on the formation of Al coating on steel by planetary ball-milling

ERDEMİR F.

Eskişehir Technical University Journal of Science and Technology-A Applied Sciences and Engineering , cilt.19, sa.3, ss.748-755, 2018 (Hakemli Dergi)

Determination of Effect of B4C Content on Density and Tensile Strength of AA7075/ B4C Composite Produced via Powder Technology

Nazik C., Tarakçıoğlu N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

International Journal of Materials, Mechanics and Manufacturing , cilt.4, sa.4, ss.251-254, 2015 (Hakemli Dergi)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.

Universal Journal of Materials Science , cilt.2, ss.90-95, 2014 (Hakemli Dergi)

Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method

ÇANAKÇI A., ERDEMİR F., VAROL T., ÖZKAYA S., Dalmış R.

Usak University Journal of Material Sciences , sa.1, ss.15-22, 2014 (Hakemli Dergi)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

ÇANAKÇI A., VAROL T., ÖZKAYA S., ERDEMİR F.

Universal Journal of Materials Science , sa.5, ss.90-95, 2014 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Evaluation of Wear Behavior of Al2024 Alloy Produced via Powder Metallurgy Using the Taguchi Method

AKÇAY S. B., VAROL T., ERDEMİR F., KOCAMAN M.

Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Türkiye, 10 - 11 Kasım 2024, ss.232-239

Microstructure and Mechanical Properties of Al2024-SiC Nanocomposites

Karabacak A. H., Çanakçı A., Varol T., Erdemir F.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.788-797

THE EFFECT OF BALL MILLING TIME ON THE PROPERTIES OF SILVER COATED COPPER MATERIALS PRODUCED BY POWDER METALLURG

VAROL T., ALVER Ü., GÜLER O., ERDEMİR F.

19TH International Metallurgy and Materials Congress, 25 - 27 Ekim 2018

Consolidation and Investigation of Properties of Hydroxyapatit-316L Stainless Steel Composites

ÖZKAYA S., ÇANAKÇI A., VAROL T., KARABACAK A. H., ÇELEBİ M., ERDEMİR F.

1. International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 Haziran - 29 Temmuz 2018, ss.828-834

Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying

KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1299-1304

DETERMINING OF THE EFFECT OF HEAT TREATMENTPARAMETER ON THE GRAIN SIZE OF AISI 316L STAİNLESS STEEL USİNG TAGUCHİ METHOD

ERDEMİR F., ÇANAKÇI A., VAROL T., YALÇIN E. D.

PPM 2017, 12 - 15 Ekim 2017

Operatör Işığının Üniversal Adezivlerin Mineye Bağlanma Performanslarına Etkisi

AYAR M. K., ERDEMİR F.

Türk Diş Hekimleri Birliği. 23. Uluslararası Bilimsel Kongresi, 21 - 23 Eylül 2017

Microstructure and some mechanical properties of Al2024-B4C composite fabricated by powder metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., VAROL T., YALÇIN E. D.

2. International Conference on Advanced Engineering Technologies, 21 - 23 Eylül 2017

Microstructure and Some Mechanical Properties of Al2024–B4C Composites Fabricated by Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., VAROL T., YALÇIN E. D.

International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1314-1321

THE EFFECT OF PROCESS PARAMETERS ON SPECIFIC SURFACE AREA OF B4C POWDERS IN MECHANICAL MILLING

ERDEMİR F.

3. International Porous and Powder Materials Symposium and exhibition, 12 - 15 Eylül 2017

Resistance of ZA27 Matrix Reinforced with Nanographene Particle

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., ÇELEBİ M.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.352-357

metal köpükler

VAROL T., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

IDEF 2017 13’xxüncü Uluslararası Savunma Sanayii Fuarı, 9 - 12 Mayıs 2017

Effects of Nitrocarburizing on the Corrosion Behavior of AISI 4140 Steel

ALVER Ü., ÇUVALCI H., GÜLER O., ERDEMİR F., Demir D.

International Conference on Engineering Technology and Innovation, Saray Bosna, Bosna-Hersek, 22 - 26 Mart 2017, ss.125

Effect of CNT Content on the Synthesis and Characterization of Copper CNT Composites Fabricated By Ball Milling

VAROL T., ÇANAKÇI A., ERDEMİR F.

16th International Materials Symposium IMSP’2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.583-588

Development of response surface methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

Devolopment of surface response methodology for optimization of proccess parameters on the formation of Fe Al intermetallic coating

ERDEMİR F., ÇANAKÇI A., YALÇIN E. D., VAROL T., ÖZKAYA S.

1st International Mediterranean Science and Engineering Congress, 26 - 28 Ekim 2016, ss.2025-2030

EFFECT OF MECHANICAL ALLOYING ON CORROSION BEHAVIOUR OF AlCuMg B 4 C NANOCOMPOSITES

ÖZKAYA S., ÇANAKÇI A., ERDEMİR F., VAROL T.

14.ULUSLARASI KOROZYON SEMPOZYUMU, 5 - 07 Ekim 2016, ss.526-530

Tribological perfprmance under dry sliding conditions of copper-graphene nanocomposites

VAROL T., ÇANAKÇI A., ERDEMİR F.

16th International Materials Symposium, 12 - 14 Ekim 2016

TRIBOLOGICAL PERFORMANCE UNDER DRY SLIDING CONDITIONS OF COPPER-GRAPHENE NANOCOMPOSITES

VAROL T., ÇANAKÇI A., ERDEMİR F.

16th International Materials Symposium IMSP'2016, Denizli, Türkiye, 12 - 14 Ekim 2016, ss.1761-1766

Corrosion Behavior of AlCuMg B4C Nanocomposites Produced by Powder Metallurgy

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

ICENS2016, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2846-2849

CORROSION BEHAVIOR OF FUNCTIONALLY GRADED Al2024/ B4C-SiC HYBRID COMPOSITES

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F.

XIV. INTERNATIONAL CORROSION SYMPOSIUM, 5 - 07 Eylül 2016

Corrosion Behaviour of AlCuMg B4C Nanocomposites Produced by Powder Metallurgy Method

ÖZKAYA S., ÇANAKÇI A., VAROL T., ERDEMİR F.

ICENS, 24 Mayıs 2016 - 28 Mayıs 2012

Determination of Effect of B4C Content on Densityand Tensile Strength of AA7075 B4C Composite Produced via Powder Technology

NAZİK C., TARAKÇIOĞLU N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

OPTIROB, ICAEM, ICREB 2015, 26 - 29 Haziran 2015

Determination of Effect of B4C content of B4C on density and tensile strength of aa7070 B4C composite produced via powder technology

NAZİK C., TARAKÇIOĞLU N., ÖZKAYA S., ERDEMİR F., ÇANAKÇI A.

ICREB, ICAEB 2015, 26 - 29 Haziran 2015

Metrikler

Yayın

150

Atıf (WoS)

711

H-İndeks (WoS)

Atıf (Scopus)

838

H-İndeks (Scopus)

Atıf (Scholar)

397

H-İndeks (Scholar)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Açık Erişim