Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation

ÇELEBİ M., GÜLER O., KARABACAK A. H., ÇANAKÇI A., AKÇAY S. B., KOCAMAN M., et al.
Tribology International , cilt.201, 2025 (SCI-Expanded) identifier

Effect of AlCrCuFeNi high entropy alloy reinforcements with and without B4C on powder characteristic, mechanical and wear properties of AA5083 metal-metal composites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., TUNÇ S. A., GÜLER O., ÇELEBİ M.
Journal of Alloys and Compounds , cilt.1008, 2024 (SCI-Expanded) identifier

A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites

ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÖZKAYA S., Arpacı K. A.
Arabian Journal for Science and Engineering , cilt.49, sa.11, ss.14625-14641, 2024 (SCI-Expanded) identifier identifier

Pre-hardening water quenching effect on the wear resistance of TiCN coated 4140 steels

YALÇIN E. D., GÜLER O., KARABACAK A. H., ÇANAKÇI A., VAROL T., KOCAMAN M., et al.
SURFACE & COATINGS TECHNOLOGY , cilt.480, 2024 (SCI-Expanded) identifier identifier

Synthesis of hydroxyapatite matrix Ag and CNT particle reinforced hybrid biocomposites with improved mechanical and antibacterial properties

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÇANAKÇI S., CEYLAN E.
International Journal of Materials Research , cilt.115, sa.3, ss.190-201, 2024 (SCI-Expanded) identifier identifier

Effect of different PCA types on morphology, physical, thermal and mechanical properties of AA2024-B4C composites

TUNÇ S. A., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., Turkmen M.
POWDER TECHNOLOGY , cilt.434, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites

Çelebi M., Çanakçı A., Güler O., Karabacak H., Akgül B., Özkaya S.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.966, 2023 (SCI-Expanded) identifier identifier

The effect of advanced electrodeposited Ni-P-Cu coatings obtained with scrap cu plates on the tribological performance of Al powder metallurgy products

Güler O., Çelebi M., Karabacak A. H., Çanakçı A.
SURFACE & COATINGS TECHNOLOGY , cilt.468, 2023 (SCI-Expanded) identifier identifier

Investigation of corrosion resistance and impact performance properties of Al<sub>2</sub>O<sub>3</sub>/SiC-doped aluminium-based composites

Çalıgülü U., Kaçmış M. V., Karabacak A. H., Çanakçı A., Özkaya S.
BULLETIN OF MATERIALS SCIENCE , cilt.46, sa.3, 2023 (SCI-Expanded) identifier identifier

Study on Effect of Milling Time on the Mechanical and Wear Properties of the ZA40-B4C-Graphene Hybrid Nanocomposites Fabricated by Vacuum Hot-Pressing

Çelebi M., Çanakçı A., Güler O., Akgül B., Karabacak A. H.
JOM , cilt.75, sa.9, ss.3935-3950, 2023 (SCI-Expanded) identifier identifier

The effects of different types and ratios of reinforcement, and machining processes on the machinability of Al2024 alloy nanocomposites

Karabacak A. H., Çanakçı A., Özkaya S., Tunç S. A., Çevik Z. A., Yalçın E. D.
JOURNAL OF COMPOSITE MATERIALS , cilt.57, sa.18, ss.2811-2827, 2023 (SCI-Expanded) identifier identifier

Production of Al2024/h-BN nanocomposites with improved corrosion, wear and mechanical properties

Karabacak A. H., Çanakçı A., Çelebi M., Güler O., Tunç S. A., Arpacı K. A.
Materials Chemistry and Physics , cilt.300, 2023 (SCI-Expanded) identifier identifier

The effect of boron nitride (h-BN) and silicon carbide (SiC) on the microstructure and wear behavior of ZA40/SiC/h-BN hybrid composites processed by hot pressing

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., VAROL T., KARABACAK A. H.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.61, sa.4, ss.257-266, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing

ÇELEBİ M., ÇANAKÇI A., GÜLER O., ÖZKAYA S., KARABACAK A. H., Arpaci K. A.
JOM , cilt.74, sa.11, ss.4449-4461, 2022 (SCI-Expanded) identifier identifier

Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.
SILICON , cilt.14, sa.14, ss.8567-8579, 2022 (SCI-Expanded) identifier identifier

The effect of machining processes on the physical and surface characteristics of AA2024-B4C-SiC hybrid nanocomposites fabricated by hot pressing method

Cevik Z. A., KARABACAK A. H., Kok M., ÇANAKÇI A., Kumar S. S., VAROL T.
JOURNAL OF COMPOSITE MATERIALS , cilt.55, sa.19, ss.2657-2671, 2021 (SCI-Expanded) identifier identifier

Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.845, 2020 (SCI-Expanded) identifier identifier

Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites

KARABACAK A. H., Çanakçı A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.5, ss.416-423, 2020 (SCI-Expanded) identifier identifier

Enhancement of Wear and Corrosion Resistance of ZA27/Nanographene Composites Produced by Powder Metallurgy

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., ÇUVALCI H., KARABACAK A. H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.44, sa.2, ss.1437-1445, 2019 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Farklı Seramik Takviyeli Al Alaşım Matrisli Nanokompozitlerin Mekanik ve Korozyon Özelliklerinin İncelenmesi

Karabacak A. H., Çanakçı A.
Karadeniz Fen Bilimleri Dergisi , cilt.13, sa.1, ss.1-14, 2023 (Hakemli Dergi) Creative Commons License

Mechanical property and structural-elemental analysis of marine bivalve mollusc shells: Cerastoderma edule, Chamelea gallina, Donax trunculus, Ruditapes decussatus

Kocabaş F. K., KOCABAŞ M., ÇANAKÇI A., KARABACAK A. H.
International Aquatic Research , cilt.15, sa.1, ss.39-50, 2023 (ESCI) identifier

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.
Universal Journal of Materials Science , cilt.6, sa.5, ss.163-169, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.
Technological Applied Sciences , cilt.13, ss.29-33, 2018 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Fabrication and Characterization of AA5083-Ni Metal-Metal Composites

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.
AKDENIZ 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.15-20

AA5083-Cr Composite Example in terms of Production and Investigation of Metal-Metal Composites

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.
AKDENIZ 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.25-29

EFFECT OF H-BN CONTENT ON MORPHOLOGY, PARTICLE SIZE, AND MICROHARDNESS OF Al2024/B4C/h-BN HYBRID NANOCOMPOSITE POWDERS

Çelebi M., Karabacak A. H., Özkaya S., Tunç S. A.
5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Rize, Türkiye, 8 - 10 Kasım 2023, ss.1357-1364

MICROSTRUCTURAL AND MECHANICAL RESPONSE OF Al2024/H-BN/B4C HYBRID NANOCOMPOSITES TO VARYING H-BN CONTENT VIA POWDER METALLURGY

Çelebi M., Çanakçı A., Karabacak A. H., Özkaya S.
5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS , Rize, Türkiye, 8 - 10 Kasım 2023, ss.1351-1356

Effect Of Secondary Phases On The Mehcanıcal And Antıbacterıal Propertıes Of Hydroxyapatıte Matrıx Cnt Reınforced Bıocomposıtes

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.
KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.36-43

Effect Of Sınterıng Temperature On Some Mechanıcal Propertıes Of Hydroxyapatıte Matrıx Ag-Reınforced Bıomaterıals

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.
KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.27-35

FABRICATION and PROPERTIES INVESTIGATION of FeNiCuCrAl-1% B4C HIGH ENTROPY ALLOY

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.
UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.97-108

FABRICATION OF Ti-HAP-CNT HYBRID COMPOSITE BIOMATERIALS AND INVESTIGATION OF PROPERTIES

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.
UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.86-96

Investigation of the Effect of TiH2 Amount on Foaming in AA2024 Based Metallic Foams Produced by Powder Metallurgy

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.
2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.410-416

PRODUCTION AND PROPERTİES OF TI-HAP-CNT HYBRID BIOMATERIAL POWDERS BY POWDER

Karabacak A. H., Çanakçı A., Özkaya S., Çelebi M.
2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.320-334

FABRICATION AND PROPERTIES OF FENICUCRAL HIGH ENTROPY ALLOYS BY POWDER METALLURGY

Karabacak A. H., Çelebi M., Özkaya S., Tunç S. A.
2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.335-345

The Effect of Different PCA Types on the Properties of AA2024-B4C Composites

Tunç S. A., Çanakçı A., Karabacak A. H., Çelebi M.
2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.417-425

Production and Microstructure Investigations of 316L Stainless Steel Reinforced Copper Matrix Composites

Tunç S. A., Çanakçı A., Karabacak A. H.
3RD INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.1051-1055

Investigation of Mechanical Properties of Cu-316L Metal-Metal Composites Produced by Powder Metallurgy Method

Tunç S. A., Çanakçı A., Karabacak A. H.
3RD INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.2034-2039

CNC Machining of B4C Reinforcement Metal Matrix Nanocomposites

Karabacak A. H., Çelebi M.
3rd International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.1286-1289

Machining of Al2024-SiC Metal Matrix Nanocomposites with CNC Method

Karabacak A. H., Çanakçı A.
3rd International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.133-136

The Effect of The Amount of Reinforcement on The Machining of Al2024- B4C Nanocomposites by WEDM Method

Karabacak A. H., Çanakçı A.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.462-466

Machining of Metal Matrix Hybrid Nanocomposites with CNC milling method

Karabacak A. H., Çelebi M.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.457-461

Machining of Al2024-SiC Nanocomposites by WEDM Method

Karabacak A. H., Tunç S. A.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.865-868

The Effect of Graphene nano-Particle Content on the Wear Behavior of Zn-Al Alloy Based and B4C Reinforced Hybrid Nanocomposites

Çelebi M., Karabacak A. H.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.478-481

The Effect of The Amount of Reinforcement on The Machining of Al2024-B4C/SiC Hybrid Nanocomposites by AWJ Method

Karabacak A. H., Çanakçı A., Tunç S. A.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.507-511

Machining of Metal Matrix Hybrid Nanocomposites with WEDM Method

Karabacak A. H., Çanakçı A., Tunç S. A., Özkaya S.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.502-506

Production and Characterization of AA2024 Based Foam Layered Functionally Graded Composites

Tunç S. A., Çanakçı A., Karabacak A. H.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.498-501

Investigation of the Effect of Temperature and Foaming Time on AA2024 Based Metal Foam Production

Tunç S. A., Çanakçı A., Karabacak A. H., Özkaya S.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 Kasım - 03 Aralık 2021, ss.494-497

Production of Hydroxyapatite Matrix Ag and CNT Reinforced Biocomposites by Powder Metallurgy Method and Investigation of Mechanical Properties

Özkaya S., Çanakçı A., Karabacak A. H., Çanakçı S., Ceylan E.
IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2 Creative Commons License

Wear Behavior of AA2024-316L SS Metal Metal Composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.
IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2 Creative Commons License

Corrosion performance of AA2024-316L SS Metal-Metal composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F.
IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2 Creative Commons License

Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.716-720

The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1157-1161

The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites

ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.1162-1165 Creative Commons License

Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.645-650 Creative Commons License

Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.710-715

Consodilation and Investigation of Properties of Hydroxyapatite-316L Stainless Steel Composites

Karabacak A. H., Özkaya S., Çanakçı A., Varol T., Çelebi M., Erdemir F.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.828-834 Creative Commons License

Microstructure and Mechanical Properties of Al2024-SiC Nanocomposites

Karabacak A. H., Çanakçı A., Varol T., Erdemir F.
1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.788-797 Creative Commons License

Production and Properties of Al2024- 2 wt. (SiC-B4C) HybridNanocomposite

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.
International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1322-1327

Microstructure and Mechanical Properties of Al2024-B4C Nanocomposite Produced by Mechanical Alloying and Hot Pressing Method

KARABACAK A. H., ÖZKAYA S., ÇANAKÇI A., ÇALIGÜLÜ U.
8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1285-1289

Characterization and Mechanical Properties of Al2024-SiC Nanocomposites Fabricated by Mechanical Alloying

KARABACAK A. H., ÇANAKÇI A., VAROL T., ERDEMİR F., ÖZKAYA S.
8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.1299-1304

Microstructure and Some Mechanical Properties of Al2024–B4C Composites Fabricated by Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., VAROL T., YALÇIN E. D.
International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1314-1321

Effect of Processing Parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.
Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 Nisan 2017, ss.636-640

Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., ÇELEBİ M., KESKİN Ö. Y., KARABACAK A. H.
2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.636-640

Aşınmaya ve Korozyona Dirençli Nanoparçacık Takviyeli Kompozit Yatak Malzemesinin Toz Metalurjisi Yöntemi ile Üretilmesi

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., VAROL T., KARABACAK A. H.
2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Türkiye, 6 - 08 Nisan 2017, cilt.2, ss.189-190 Sürdürülebilir Kalkınma

The Production and Wear and Corrosion Resistance Composite bearing Material Reinforcement with Nanoparticle by Powder Metallurgy

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., VAROL T., ERDEMİR F., KARABACAK A. H.
2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.581-586

CORROSION BEHAVIOR OF FUNCTIONALLY GRADED Al2024/ B4C-SiC HYBRID COMPOSITES

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F.
XIV. INTERNATIONAL CORROSION SYMPOSIUM, 5 - 07 Eylül 2016

Metrikler

Yayın

66

Atıf (WoS)

157

H-İndeks (WoS)

8

Atıf (Scopus)

174

H-İndeks (Scopus)

8

Atıf (Scholar)

161

H-İndeks (Scholar)

8

Proje

11

Fikri Mülkiyet

1

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları