Doç. Dr. HASAN ÖLMEZ

Yayın Ağı

Makaleler 17

1. Pasif Yalpa Tankı ile Gemilerde Parametrik Yalpa Hareketinin Sönümlenmesi

Peşman E., Ölmez H., Taylan M.

Gemi ve Deniz Teknolojisi , sa.225, ss.1-15, 2024 (Hakemli Dergi)

2. Waste heat recovery assessment of triple heat-exchanger usage for ship main engine pre-heating and fresh water generation systems

Çolak K., Ölmez H., Saraç B.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT , cilt.238, sa.1, ss.209-230, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

3. Evaluation of the Applicability of Digital Photogrammetry-Based Initial Imperfections on NLFEM Ultimate Strength Analysis of Ship-Type Stiffened Plates

Ölmez H.

Gemi ve Deniz Teknolojisi , sa.224, ss.60-77, 2024 (Hakemli Dergi)

4. Thermodynamic and feasibility analysis of using diesel generator exhaust gases for ship main engine preheating at port periods

ÇOLAK K., ÖLMEZ H.

APPLIED THERMAL ENGINEERING , cilt.235, 2023 (SCI-Expanded)

5. Evaluation of the contact problem of functionally graded layer resting on rigid foundation pressed via rigid punch by analytical and numerical (FEM and MLP) methods

YAYLACI M., Abanoz M., Yaylaci E. U., ÖLMEZ H., SEKBAN D. M., BİRİNCİ A.

ARCHIVE OF APPLIED MECHANICS , cilt.92, sa.6, ss.1953-1971, 2022 (SCI-Expanded, Scopus)

6. The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch

Yaylacı M., Abanoz M., Yaylaci E. U., Ölmez H., Sekban D. M., Birinci A.

STEEL AND COMPOSITE STRUCTURES , cilt.43, sa.5, ss.661-672, 2022 (SCI-Expanded, Scopus)

7. Finite element analysis of the mechanical behavior of the different angle hip femoral stem

Güvercin Y., Yaylacı M., Ölmez H., Uzun Yaylacı E., Özdemir M. E., Dizdar A.

BIOMATERIALS AND BIOMECHANICS IN BIOENGINEERING , cilt.6, sa.1, ss.29-46, 2022 (ESCI)

8. Priority Assessment of Key Factors of IMO-MSC/Circular.834 for Ship Engine Room Safety and Efficiency Based on Human Aspects

ÖLMEZ H., BAŞTÜRK S., ÇOLAK K.

JOURNAL OF SHIP PRODUCTION AND DESIGN , cilt.38, sa.1, ss.1-8, 2022 (SCI-Expanded)

9. Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method and multilayer perceptron

YAYLACI M., Yayli M., Yaylaci E. U., ÖLMEZ H., BİRİNCİ A.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.78, sa.5, ss.585-597, 2021 (SCI-Expanded)

10. Effect of stress-strain curve changing with equal channel angular pressing on ultimate strength of ship hull stiffened panels

SEKBAN D. M., ÖLMEZ H.

STRUCTURAL ENGINEERING AND MECHANICS , cilt.78, sa.4, ss.473-484, 2021 (SCI-Expanded, Scopus)

11. Normalleşme Sürecinde Ofis Çalışmalarında Covid-19’u Önlemede Balık Kılçığı Yöntemi ile Sebep Sonuç Analizi

Ölmez H., Ergun İ., Ensari M., Can E.

International Journal of Advances in Engineering and Pure Sciences , cilt.33, sa.1, ss.106-115, 2021 (Hakemli Dergi) Sürdürülebilir Kalkınma

12. Investigation of The Effect of Different Prosthesis Designs and Numbers on Stress, Strain and Deformation Distribution

NİŞANCİ G. N., GÜVERCİN Y., ATEŞ S. M., ÖLMEZ H., UZUN Y. E., YAYLACI M.

International Journal of Engineering and Applied Sciences , cilt.12, sa.4, ss.138-152, 2020 (Hakemli Dergi)

13. Artificial neural network calculations for a receding contact problem

Yaylaci E. U., Yaylacı M., Ölmez H., Birinci A.

COMPUTERS AND CONCRETE , cilt.25, sa.6, ss.551-563, 2020 (SCI-Expanded)

14. MAXIMUM LOAD CARRYING CAPACITY ESTIMATION OF THE SHIP AND OFFSHORE STRUCTURES BY PROGRESSIVE COLLAPSE APPROACH

ÖLMEZ H., Bayraktarkatal E.

POLISH MARITIME RESEARCH , cilt.23, sa.3, ss.28-38, 2016 (SCI-Expanded)

15. Effects of Key Factors on Hull Girder Ultimate Strength Estimation by Progressive Collapse Calculations

ÖLMEZ H., Bayraktarkatal E.

LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES , cilt.13, sa.13, ss.2371-2392, 2016 (SCI-Expanded)

16. Doğu Karadeniz gemi inşa sanayi ve üniversite işbirliği -1 "Yeniçam tersanesinde üretim destek ve hizmet merkezi kurulması"

ÖLMEZ H., KÖSE E., PEŞMAN E.

Gemi ve Deniz Teknolojisi , ss.14-21, 2013 (Hakemli Dergi)

17. Köpük Dolgulu Tüp Monte Edilmiş Bir Kompozit Teknede Oluşan Ek Darbe Direnci Ve Denizcilik Analizi

SEKBAN D. M., KÖSE E., ÖLMEZ H.

Boat Builder , cilt.7, sa.38, ss.46-50, 2013 (Hakemsiz Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 13

1. VERIFICATION OF STRUCTURAL APPLICATIONS CONFORMING TO OR EXCEEDING CLASS RULES BY DIRECT STRENGTH CALCULATIONS USING FINITE ELEMENT METHOD: TWO RECENT CASE STUDIES

Ölmez H.

3rd International Congress on Ship and Marine Technology, Trabzon, Türkiye, 10 - 12 Aralık 2024, cilt.1, ss.55-67, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

2. Win-Win or Win-Lose Situation Assessment for Ship Recycling Sector of Turkey in terms of Green Maritime Industry Approach

Ölmez H.

2nd International Congress on Ship and Marine Technology, İstanbul, Türkiye, 16 - 18 Eylül 2021, cilt.1, ss.1-11, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

3. GEMİ ANA MAKİNE ÖN ISITMASINDA DİZEL JENERATÖR EGZOZ GAZLARI KULLANIMININ ENERJİ TASARRUFUNA ETKİSİNİN TERMODİNAMİK ANALİZİ

Çolak K., Ölmez H., Saraç B.

2nd INTERNATIONAL CONGRESS ON SHIP AND MARINE TECHNOLOGY, İstanbul, Türkiye, 16 - 18 Eylül 2021, ss.587-602, (Tam Metin Bildiri)

4. Interpretation of Rule-Based Ship Structural Element Sizing by Finite Element Analysis

Ölmez H., Atik H.

III. GLOBAL CONFERENCE ON INNOVATION IN MARINE TECHNOLOGY AND THE FUTURE OF MARITIME TRANSPORTATION, İzmir, Türkiye, 18 - 19 Nisan 2019, ss.600-616, (Tam Metin Bildiri)

5. Effect of Friction Stir Processing on Ultimate Strength of Ship Hull Girder Plates Estimated by Finite Element Analysis

SEKBAN D. M., ÖLMEZ H., AKTARER S. M., KÖSE E., PÜRÇEK G.

3rd INTERNATIONAL SYMPOSIUM ON NAVAL ARCHITECTURE AND MARITIME, İstanbul, Türkiye, 24 - 25 Nisan 2018, ss.175-184, (Tam Metin Bildiri)

6. On The Roll Motion A Ship With Passive Anti-Roll Tank In Regular Longitudinal Waves

PEŞMAN E., ÖLMEZ H., TAYLAN M.

INT-NAM 2014 2nd International Symposium on Naval Architecture and Maritime, İstanbul, Türkiye, 23 - 24 Ekim 2014, cilt.1, sa.1, ss.531-545, (Tam Metin Bildiri)

7. EFFECT OF ELEMENT DISCRETIZATION ON HULL GIRDER ULTIMATE STRENGTH ESTIMATION ACCURACY BY PROGRESSIVE COLLAPSE CALCULATIONS

ÖLMEZ H., BAYRAKTARKATAL E.

INT-NAM 2014 2nd International Symposium on Naval Architecture and Maritime, İstanbul, Türkiye, 23 - 24 Ekim 2014, cilt.1, sa.1, ss.639-648, (Tam Metin Bildiri)