Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Analysis of stress and deformation of an exponentially graded viscoelastic coated half plane under indentation by a rigid flat punch indenter tip

ÇÖMEZ İ.
Mechanics of Time-Dependent Materials , cilt.28, sa.3, ss.1271-1289, 2024 (SCI-Expanded) Creative Commons License identifier identifier

Partial Closure of a Crack Located in an Infinite Orthotropic Layer Indented by Flat Punches

Çetinkaya İ. T., Oğuz H., ÇÖMEZ İ.
Iranian Journal of Science and Technology - Transactions of Mechanical Engineering , cilt.48, sa.3, ss.1087-1100, 2024 (SCI-Expanded) identifier identifier

Receding contact problem of an orthotropic layer supported by rigid quarter planes

Oguz H., Cetinkaya I. T., ÇÖMEZ İ.
STRUCTURAL ENGINEERING AND MECHANICS , sa.5, ss.459-468, 2024 (SCI-Expanded) identifier

FRICTIONAL RECEDING CONTACT PROBLEM OF A FUNCTIONALLY GRADED ORTHOTROPIC LAYER / ORTHOTROPIC INTERLAYER / ISOTROPIC HALF PLANE SYSTEM

Oguz H., Cetinkaya I. t., ÇÖMEZ İ.
JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES , sa.4, 2024 (SCI-Expanded) identifier

Moving contact problem of a functionally graded orthotropic coated half plane

Karabulut P. M., Çetinkaya İ. T., Oğuz H., ÇÖMEZ İ.
Acta Mechanica , cilt.235, sa.6, ss.3989-4004, 2024 (SCI-Expanded) Creative Commons License identifier identifier

Dynamic indentation of viscoelastic orthotropic layer supported by a Winkler–Pasternak foundation

ÇÖMEZ İ.
Acta Mechanica , cilt.235, sa.5, ss.2599-2610, 2024 (SCI-Expanded) identifier identifier

Continuous and discontinuous contact problems of a functionally graded piezoelectric layer resting on a homogeneous piezoelectric half plane

ÇÖMEZ İ., Güler M. A., El-Borgi S.
Mechanics of Advanced Materials and Structures , cilt.31, sa.10, ss.2130-2143, 2024 (SCI-Expanded) identifier identifier

Frictional contact problem of a coated half plane pressed by a rigid punch with coupled stress elasticity

ÇÖMEZ İ., El-Borgi S.
ARCHIVE OF APPLIED MECHANICS , cilt.93, sa.9, ss.3533-3552, 2023 (SCI-Expanded) identifier identifier

Continuous and discontinuous contact problem of a functionally graded orthotropic layer indented by a rigid cylindrical punch: Analytical and finite element approaches

Karabulut P. M., ÇÖMEZ İ.
ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik , cilt.103, sa.6, 2023 (SCI-Expanded) identifier identifier

Sliding frictional contact problem of a layer indented by a rigid punch in couple stress elasticity

ÇÖMEZ İ., El-Borgi S.
MATHEMATICS AND MECHANICS OF SOLIDS , cilt.28, sa.3, ss.730-747, 2023 (SCI-Expanded) identifier identifier

Moving Contact Problem of an Unbonded Layer in the Presence of Body Force

ÇÖMEZ İ.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING , cilt.46, sa.4, ss.927-942, 2022 (SCI-Expanded) identifier identifier

Dynamic contact problem for a viscoelastic orthotropic coated isotropic half plane

Çömez İ.
ACTA MECHANICA , cilt.233, sa.12, ss.5241-5253, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Thermoelastic contact problem of a magneto-electro-elastic layer indented by a rigid insulating punch

Çömez İ.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.29, sa.28, ss.7231-7245, 2022 (SCI-Expanded) identifier identifier

Continuous and discontinuous contact problem of a magneto-electro-elastic layer

ÇÖMEZ İ., Karabulut P. M.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.83, sa.1, ss.67-77, 2022 (SCI-Expanded) identifier identifier

Frictional moving contact problem between a functionally graded monoclinic layer and a rigid punch of an arbitrary profile

ÇÖMEZ İ.
ACTA MECHANICA , cilt.233, sa.4, ss.1435-1453, 2022 (SCI-Expanded) identifier identifier

Two-dimensional solution of functionally graded piezoelectric-layered beams

ÇÖMEZ İ., Aribas U. N., Kutlu A., Omurtag M. H.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.44, sa.3, 2022 (SCI-Expanded) identifier identifier

Thermoelastic contact problem of a rigid punch sliding on a functionally graded piezoelectric layered half plane with heat generation

ÇÖMEZ İ., Guler M. A.
JOURNAL OF THERMAL STRESSES , cilt.45, sa.3, ss.191-213, 2022 (SCI-Expanded) identifier identifier

The partial slip contact problem for a monoclinic coated half plane

ÇÖMEZ İ., Alinia Y., Guler M. A.
ARCHIVES OF MECHANICS , cilt.74, sa.1, ss.13-37, 2022 (SCI-Expanded) identifier identifier

A receding contact problem between a graded piezoelectric layer and a piezoelectric substrate

El-Borgi S., ÇÖMEZ İ., Guler M. A.
ARCHIVE OF APPLIED MECHANICS , cilt.91, sa.12, ss.4835-4854, 2021 (SCI-Expanded) identifier identifier

Frictional moving contact problem between a conducting rigid cylindrical punch and a functionally graded piezoelectric layered half plane

ÇÖMEZ İ.
MECCANICA , cilt.56, sa.12, ss.3039-3058, 2021 (SCI-Expanded) identifier identifier

Contact problem between a rigid punch and a functionally graded orthotropic layer resting on a Pasternak foundation

ÇÖMEZ İ., Omurtag M. H.
ARCHIVE OF APPLIED MECHANICS , cilt.91, sa.9, ss.3937-3958, 2021 (SCI-Expanded) identifier identifier

An effective method for the frictional thermoelastic contact of a cylindrical punch on a piezoelectric layer

ÇÖMEZ İ.
JOURNAL OF THERMAL STRESSES , cilt.44, sa.8, ss.1030-1051, 2021 (SCI-Expanded) identifier identifier

An Exact Elasticity Solution for Monoclinic Functionally Graded Beams

Çömez İ., Aribas U. N., Kutlu A., Omurtag M. H.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.46, sa.5, ss.5135-5155, 2021 (SCI-Expanded) identifier identifier

Thermoelastic receding contact problem of a layer resting on a half plane with frictional heat generation

ÇÖMEZ İ.
JOURNAL OF THERMAL STRESSES , cilt.44, sa.5, ss.566-581, 2021 (SCI-Expanded) identifier identifier

Partial slip contact analysis for a monoclinic half plane

Çömez İ., Alinia Y., Güler M. A., El-Borgi S.
Mathematics And Mechanics Of Solids , cilt.26, sa.3, ss.401-421, 2021 (SCI-Expanded)

Frictional moving contact problem of a magneto- electro- elastic half plane

ÇÖMEZ İ.
MECHANICS OF MATERIALS , cilt.154, 2021 (SCI-Expanded) identifier identifier

On the contact problem of a moving rigid cylindrical punch sliding over an orthotropic layer bonded to an isotropic half plane

ÇÖMEZ İ., Guler M. A.
MATHEMATICS AND MECHANICS OF SOLIDS , cilt.25, sa.10, ss.1924-1942, 2020 (SCI-Expanded) identifier identifier

Contact mechanics of the functionally graded monoclinic layer

ÇÖMEZ İ.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , cilt.83, 2020 (SCI-Expanded) identifier identifier

Frictional receding contact problem of a functionally graded layer resting on a homogeneous coated half-plane

ÇÖMEZ İ., El-Borgi S., YILDIRIM B.
ARCHIVE OF APPLIED MECHANICS , cilt.90, sa.9, ss.2113-2131, 2020 (SCI-Expanded) identifier identifier

Continuous and discontinuous contact problems of a homogeneous piezoelectric layer pressed by a conducting rigid flat punch

Comez I., Güler M. A., El-BORGİ S.
ACTA MECHANICA , cilt.231, sa.3, ss.957-976, 2020 (SCI-Expanded) identifier identifier

Double frictional receding contact problem for an orthotropic layer loaded by normal and tangential forces

Yildirim B., Yilmaz K. B., Comez I., Guler M. A.
MECCANICA , cilt.54, sa.14, ss.2183-2206, 2019 (SCI-Expanded) identifier identifier

Sliding frictional contact analysis of a monoclinic coating/isotropic substrate system

Yilmaz K. B., Comez I., Guler M. A., Yildirim B.
MECHANICS OF MATERIALS , cilt.137, 2019 (SCI-Expanded) identifier identifier

On the plane frictional contact problem of a homogeneous orthotropic layer loaded by a rigid cylindrical stamp

Comez I., Yilmaz K. B., Guler M. A., Yildirim B.
ARCHIVE OF APPLIED MECHANICS , cilt.89, sa.7, ss.1403-1419, 2019 (SCI-Expanded) identifier identifier

Frictional moving contact problem of an orthotropic layer indented by a rigid cylindrical punch

ÇÖMEZ İ.
MECHANICS OF MATERIALS , cilt.133, ss.120-127, 2019 (SCI-Expanded) identifier identifier

The effect of orthotropic material gradation on the plane sliding frictional contact mechanics problem

YILMAZ K. B., Comez L., Guler M. A., YILDIRIM B.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , cilt.54, sa.4, ss.254-275, 2019 (SCI-Expanded) identifier identifier

Mechanics of frictional contact for an arbitrary oriented orthotropic material

ÇÖMEZ İ., YILMAZ K. B.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.99, sa.3, 2019 (SCI-Expanded) identifier identifier

Analytical and finite element solution of the sliding frictional contact problem for a homogeneous orthotropic coating-isotropic substrate system

Yilmaz K. B., Comez I., Guler M. A., Yildirim B.
ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK , cilt.99, sa.3, 2019 (SCI-Expanded) identifier identifier

Continuous and discontinuous contact problem of a functionally graded layer pressed by a rigid cylindrical punch

ÇÖMEZ İ.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , cilt.73, ss.437-448, 2019 (SCI-Expanded) identifier identifier

On the plane frictional contact problem of a homogeneous orthotropic layer loaded by a rigid cylindrical stamp

ÇÖMEZ İ., Yılmaz K. B., Güler M. A., Yıldırım B.
ARCHIVE OF APPLIED MECHANICS , cilt.89, ss.1403-1419, 2019 (SCI-Expanded)

Contact problem of a graded layer supported by two rigid punches

ÇÖMEZ İ., EL-BORGI S.
ARCHIVE OF APPLIED MECHANICS , cilt.88, sa.10, ss.1893-1903, 2018 (SCI-Expanded) identifier identifier

Frictional receding contact problem for a graded bilayer system indented by a rigid punch

Yilmaz K. B., Comez I., Yildirim B., Guler M. A., El-Borgi S.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.141, ss.127-142, 2018 (SCI-Expanded) identifier identifier

Plane receding contact problem for a functionally graded layer supported by two quarter-planes

ÇÖMEZ İ., KAHYA V., Erdol R.
ARCHIVES OF MECHANICS , cilt.70, sa.6, ss.485-504, 2018 (SCI-Expanded) identifier identifier

Frictional moving contact problem for a layer indented by a rigid cylindrical punch

ÇÖMEZ İ.
ARCHIVE OF APPLIED MECHANICS , cilt.87, sa.12, ss.1993-2002, 2017 (SCI-Expanded) identifier identifier

A receding frictional contact problem between a graded layer and a homogeneous substrate pressed by a rigid punch

EL-BORGI S., ÇÖMEZ İ.
MECHANICS OF MATERIALS , cilt.114, ss.201-214, 2017 (SCI-Expanded) identifier identifier

The contact problem of a rigid punch sliding over a functionally graded bilayer

ÇÖMEZ İ., Guler M. A.
ACTA MECHANICA , cilt.228, sa.6, ss.2237-2249, 2017 (SCI-Expanded) identifier identifier

Receding contact problem for two-layer functionally graded media indented by a rigid punch

ÇÖMEZ İ., El-Borgi S., KAHYA V., Erdol R.
ACTA MECHANICA , cilt.227, sa.9, ss.2493-2504, 2016 (SCI-Expanded) identifier identifier

Contact problem for a functionally graded layer indented by a moving punch

Comez I.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.100, ss.339-344, 2015 (SCI-Expanded) identifier identifier

Elasticity solution for a functionally graded two-layer beam with simple supported edges

ÇÖMEZ İ.
Turkish Journal of Engineering and Environmental Sciences , cilt.38, ss.373-381, 2014 (SCI-Expanded)

Contact problem of a functionally graded layer resting on a Winkler foundation

Comez I.
ACTA MECHANICA , cilt.224, sa.11, ss.2833-2843, 2013 (SCI-Expanded) identifier identifier

Receding contact problem for a coated layer and a half-plane loaded by a rigid cylindrical stamp

Adibelli H., ÇÖMEZ İ., ERDÖL R.
ARCHIVES OF MECHANICS , cilt.65, sa.3, ss.219-236, 2013 (SCI-Expanded) identifier identifier

Frictional contact problem of a rigid stamp and an elastic layer bonded to a homogeneous substrate

ÇÖMEZ İ., ERDÖL R.
ARCHIVE OF APPLIED MECHANICS , cilt.83, sa.1, ss.15-24, 2013 (SCI-Expanded) identifier identifier

Frictional contact problem for a rigid cylindrical stamp and an elastic layer resting on a half plane

Comez I.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.47, ss.1090-1097, 2010 (SCI-Expanded) identifier identifier

Application of artificial neural networks to a double receding contact problem with a rigid stamp

ÇAKIROĞLU E., Comez I., ERDÖL R.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.21, sa.2, ss.205-220, 2005 (SCI-Expanded) identifier identifier

Double receding contact problem for a rigid stamp and two elastic layers

Comez I., Birinci A., Erdol R.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , cilt.23, sa.2, ss.301-309, 2004 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Frictionless contact problem between a rigid moving punch and a homogeneous layer resting on a Winkler foundation

ÇÖMEZ İ., Yılmaz K. B., Güler M. A., Yıldırım B.
Journal of Structural Engineering & Applied Mechanic , cilt.2, sa.2, ss.75-87, 2019 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Rijit Bir Panç Aracılığıyla Bastırılmış ve Alttan Tam Bağlı Ağırlıksız Çift Şeritte Değme Problemi

ÇÖMEZ İ., BİRİNCİ A., Erdol R.
XIII. Ulusal Mekanik Kongresi, Gaziantep, Türkiye, ss.321

ELASTİK YARIM DÜZLEM ÜZERİNE RİJİT ZIMBA İLE BASTIRILAN TABAKALI KOMPOZİTİN SÜRTÜNMELİ TEMAS PROBLEMİ

ADIBELLİ H., ÇÖMEZ İ., Erdöl R.
21. Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, ss.706-715

DAİRESEL ZIMBA İLE BASTIRILAN ELEKTROMANYETİK YARIM DÜZLEMİN HAREKETLİ TEMAS PROBLEMİ

ÇÖMEZ İ.
21. Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, ss.716-725

DAİRESEL ZIMBA İLE İZOTROP YARIM DÜZLEME BASTIRILAN ORTOTROP TABAKANIN SÜRTÜNMELİ TEMAS PROBLEMİ

Yılmaz K. B., ÇÖMEZ İ., Güler M. A., Yıldırım B.
21. Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, ss.687-696

FRICTIONAL SLIDING CONTACT PROBLEM OF AN ORTHOTROPIC LAYER PRESSED BY A RIGID PARABOLIC PUNCH

Yılmaz K. B., ÇÖMEZ İ., Güler M. A., Yıldırım B.
International Civil Engineering & Architecture Conference, Trabzon, Türkiye, 17 - 20 Nisan 2019, ss.1022-1030

FRICTIONAL CONTACT PROBLEM BETWEEN A FUNCTIONALLY GRADED ORTHOTROPIC LAYER AND A RIGID FLAT PUNCH

Yılmaz K. B., ÇÖMEZ İ., Güler M. A., Yıldırım B.
International Civil Engineering & Architecture Conference, Trabzon, Türkiye, 17 - 20 Nisan 2019, ss.1013-1021

Hareketli Zımba ile Bastırılan Tabakanın Sürtünmeli Değme Problemi

ÇÖMEZ İ., ADIBELLİ H., ERDÖL R.
XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.1

HAREKETLİ ZIMBA İLE BASTIRILAN TABAKANIN SÜRTÜNMELİ DEĞME PROBLEMİ

ÇÖMEZ İ., ADIBELLİ H., ERDÖL R.
XIX. ULUSAL MEKANİK KONGRESİ, Trabzon, Türkiye, 24 - 28 Eylül 2015

Winkler Zeminine Oturan Fonksiyonel Derecelendirilmiş Tabakada Değme Problemi

ÇÖMEZ İ., ADIBELLİ H., ERDÖL R.
XVIII. Ulusal Mekanik Kongresi, Türkiye, 26 - 30 Ağustos 2013

Winkler Zeminine Oturan Fonksiyonel Derecelendirilmis Tabakada Degme Problemi

ÇÖMEZ İ., ADIBELLİ H., Erdol R.
XVIII. Ulusal Mekanik Kongresi, Manisa, Türkiye, 26 - 30 Ağustos 2013, ss.1

İki Elastik Çeyrek Düzleme Oturan ve Dairesel Rijit Bir Panç ile Bastırılan Elastik Tabaka Problemi

ÇAKIROĞLU E., ÇÖMEZ İ., ERDÖL R.
XVII. Ulusal Mekanik Kongresi, Türkiye, 5 - 09 Eylül 2011

İki Elastik Çeyrek Düzleme Oturan Ve Dairesel Rijit Bir Panç İle Bastırılan Elastik Tabaka Probleminde Temas Mesafelerinin Yapay Sinir Ağı İle Hesabı

ERDOĞAN Ç., ÇÖMEZ İ., ERDÖL R.
XVII. Ulusal Mekanik Kongresi, Elazığ, Türkiye, 5 - 09 Eylül 2011

İKİ ELASTİK ÇEYREK DÜZLEME OTURAN VE DAİRESEL RİJİT BİR PANÇ İLE Iki Elastik Çeyrek Düzleme Oturan ve Dairesel Rijit Bir Panç ile Bastırılan Elastik Tabaka Problemi

ÇAKIROĞLU E., ÇÖMEZ İ., Erdol R.
XVII. Ulusal Mekanik Kongresi, Elazığ, Türkiye, 5 - 09 Eylül 2011, ss.192-201

Iki Elastik Çeyrek Düzleme Oturan Ve Dairesel Rijit Bir Panç Ile Bastırılan Elastik Tabaka Probleminde Temas Mesafelerinin Yapay Sinir Agı Ile Hesabı

ÇAKIROĞLU E., ÇÖMEZ İ., Erdol R.
XVII. Ulusal Mekanik Kongresi, Elazığ, Türkiye, 5 - 09 Eylül 2011, ss.192-201

Rijit Panç İle Bastırılmış Elastik Yarım Düzleme Oturmuş Ağırlıksız Çift Şeritte Değme Problemi

ADIBELLİ H., ÇÖMEZ İ., ERDÖL R.
XVI. Ulusal Mekanik Kongresi, Elazığ, Türkiye, 22 - 26 Haziran 2009

Rijit Dairesel Bir Pançla Bastırılan Ve Elastik Yarım Düzleme Oturan Tabakanın Sürtünmeli Değme Problemi

ÇÖMEZ İ., ERDÖL R.
XVI. Ulusal Mekanik Kongresi, Kayseri, Türkiye, 22 - 26 Haziran 2009

Rijit Panç Ile Bastırılmıs Elastik Yarım Düzleme Oturmus Agırlıksız Çift Seritte Degme Problemi

ADIBELLİ H., ÇÖMEZ İ., Erdol R.
XVI. Ulusal Mekanik Kongresi, Kayseri, Türkiye, 22 - 26 Haziran 2009, ss.71-82

Rijit Dairesel Bir Pançla Bastırılan Ve Elastik Yarım Düzleme Oturan Tabakanın Sürtünmeli Degme Problemi

ÇÖMEZ İ., Erdol R.
XVI. Ulusal Mekanik Kongresi, Kayseri, Türkiye, 22 - 26 Haziran 2009, ss.443-454

Rijit Dairesel Bir Pançla Bastırılmış Elastik Yarım Düzleme Tam Yapışık Tabakanın Sürtünmeli Değme Problemi

ÇÖMEZ İ., ERDÖL R.
XV. Ulusal Mekanik Kongresi, Isparta, Türkiye, 3 - 07 Eylül 2007

RiJiT DAiRESEL BiR PANÇLA BASTIRILMIs, ELASTiK YARIM DÜZLEME TAM YAPIsIK TABAKANIN SÜRTÜNMELi DEgME PROBLEMi

ÇÖMEZ İ., Erdol R.
XV. Ulusal Mekanik Kongresi, Isparta, Türkiye, 3 - 07 Eylül 2007, ss.309-320

Değme Probleminin Yapay Sinir Ağı Yaklaşımıyla Analizi

ERDOĞAN Ç., ÇÖMEZ İ., ERDÖL R.
XIV. Ulusal Mekanik Kongresi, ANTAKYA, Türkiye, 12 - 16 Eylül 2005

DEGME PROBLEMİNİN YAPAY SİNİR AGI YAKLAŞIMIYLA ANALİZİ

Cakiroglu E., ÇÖMEZ İ., Erdol R.
XIV. ULUSAL MEKANİK KONGRESİ, Hatay, Türkiye, 12 - 16 Eylül 2005, ss.265-274

Rijit Bir Panç Aracılığıyla Bastırılmış ve Alttan Tam Bağlı Ağırlıksız Çift Şeritte Değme Problemi

ÇÖMEZ İ., BİRİNCİ A., Erdol R.
XIII. Ulusal Mekanik Kongresi, Gaziantep, Türkiye, 8 - 14 Eylül 2003, ss.321-332

Metrikler

Yayın

79

Atıf (WoS)

308

H-İndeks (WoS)

9

Atıf (Scopus)

324

H-İndeks (Scopus)

10

Atıf (Scholar)

56

H-İndeks (Scholar)

2

Tez Danışmanlığı

1

Açık Erişim

5