Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Pre-hardening water quenching effect on the wear resistance of TiCN coated 4140 steels

Yalçın E. D., Güler O., Karabacak A. H., Çanakçı A., Varol T., Kocaman M., et al.
SURFACE AND COATINGS TECHNOLOGY , cilt.480, sa.5, ss.1-14, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

Synthesis of hydroxyapatite matrix Ag and CNT particle reinforced hybrid biocomposites with improved mechanical and antibacterial properties

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÇANAKÇI S., CEYLAN E.
International Journal of Materials Research , cilt.115, sa.3, ss.190-201, 2024 (SCI-Expanded) identifier

Surface modification for improving interfacial, mechanical and thermal performance characteristics in epoxy composites: Electroless nickel enhancement of dendritic copper particle-reinforced epoxy

AKÇAY S. B., KOCAMAN M., ÇELEBİ M., GÜLER O., VAROL T.
Surface and Coatings Technology , cilt.478, 2024 (SCI-Expanded) identifier

Effect of different PCA types on morphology, physical, thermal and mechanical properties of AA2024-B4C composites

Tunç S. A., Çanakçı A., Karabacak A. H., Çelebi M., Türkmen M.
POWDER TECHNOLOGY , cilt.434, ss.1-18, 2024 (SCI-Expanded)

A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites

ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÖZKAYA S., Arpacı K. A.
Arabian Journal for Science and Engineering , 2024 (SCI-Expanded) identifier

A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites

Çelebi M., Çanakçı A., Güler O., Karabacak H., Akgül B., Özkaya S.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.966, 2023 (SCI-Expanded) identifier identifier

The effect of advanced electrodeposited Ni-P-Cu coatings obtained with scrap cu plates on the tribological performance of Al powder metallurgy products

Güler O., Çelebi M., Karabacak A. H., Çanakçı A.
SURFACE & COATINGS TECHNOLOGY , cilt.468, 2023 (SCI-Expanded) identifier identifier

Study on Effect of Milling Time on the Mechanical and Wear Properties of the ZA40-B4C-Graphene Hybrid Nanocomposites Fabricated by Vacuum Hot-Pressing

Çelebi M., Çanakçı A., Güler O., Akgül B., Karabacak A. H.
JOM , cilt.75, sa.9, ss.3935-3950, 2023 (SCI-Expanded) identifier identifier

Production of Al2024/h-BN nanocomposites with improved corrosion, wear and mechanical properties

Karabacak A. H., Çanakçı A., Çelebi M., Güler O., Tunç S. A., Arpacı K. A.
Materials Chemistry and Physics , cilt.300, 2023 (SCI-Expanded) identifier identifier

Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing

ÇELEBİ M., ÇANAKÇI A., GÜLER O., ÖZKAYA S., KARABACAK A. H., Arpaci K. A.
JOM , cilt.74, sa.11, ss.4449-4461, 2022 (SCI-Expanded) identifier identifier

Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.
SILICON , cilt.14, sa.14, ss.8567-8579, 2022 (SCI-Expanded) identifier identifier

The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy

ÇELEBİ M., GÜLER O., ÇANAKÇI A., ÇUVALCI H.
JOURNAL OF COMPOSITE MATERIALS , cilt.55, sa.24, ss.3395-3408, 2021 (SCI-Expanded) identifier identifier

Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.845, 2020 (SCI-Expanded) identifier identifier

Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance

GÜLER O., ÇELEBİ M., Dalmış R., ÇANAKÇI A., ÇUVALCI H.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , cilt.51, sa.9, ss.4632-4646, 2020 (SCI-Expanded) identifier identifier

Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites

KARABACAK A. H., Çanakçı A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.5, ss.416-423, 2020 (SCI-Expanded) identifier identifier

Effect of nano alumina content on corrosion behavior and microstructure of Za27/graphite/alumina hybrid nanocomposites

GÜLER O., ERDEMİR F., ÇELEBİ M., Cuvalc H., Canak A.
RESULTS IN PHYSICS , cilt.15, 2019 (SCI-Expanded) identifier identifier

Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites

GÜLER O., ÇUVALCI H., GÖKDAĞ M., ÇANAKÇI A., ÇELEBİ M.
PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.7, ss.899-907, 2018 (SCI-Expanded) identifier identifier

THE EFFECT OF NANO GRAPHITE PARTICLE CONTENT ON THE WEAR BEHAVIOUR OF ZA27 BASED HYBRID COMPOSITES

Guler O., Cuvalci H., Canakci A., Celebi M.
ADVANCED COMPOSITES LETTERS , cilt.26, sa.2, ss.30-36, 2017 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.
UNIVERSAL JOURNAL OF MATERIALS SCIENCE , cilt.6, sa.5, ss.163-169, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT. (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.
Technological Applied Sciences , cilt.13, sa.1, ss.29-33, 2018 (Hakemli Dergi)

The Characterization of Graphite Nanoparticle Reinforced ZA27 based Nanocomposites Fabricated by Powder Metallurgy

ÇELEBİ M., GÜLER O., ÇUVALCI H., ÇANAKÇI A.
Progress in Materials Science and Engineering , cilt.1, sa.1, ss.1-12, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Wear Behavior of AA2024-316L SS Metal Metal Composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.
IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2 Creative Commons License

Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.710-715

The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites

ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.1162-1165 Creative Commons License

The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1157-1161

Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.716-720

Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.645-650 Creative Commons License

PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.
19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.5-7

Production of Al2024 Foams by Space Holder Technique

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.
International Metallurgy and Materials Congress, 25 - 27 Ekim 2018, ss.236-239

Consolidation and Investigation of Properties of Hydroxyapatit-316L Stainless Steel Composites

ÖZKAYA S., ÇANAKÇI A., VAROL T., KARABACAK A. H., ÇELEBİ M., ERDEMİR F.
1. International Technological Sciences and Design Symposium, Giresun, Türkiye, 27 Haziran - 29 Temmuz 2018, ss.828-834

The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.
8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.1752-1756

The Investigation of Wear Performance of Fe/B4C/Graphene Hybrid Nanocomposites

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., ERDEMİR F.
8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.23

THE EFFECT OF MECHANICAL MILLING TIME ON THE PHYSICAL AND MECHANICAL PROPERTIES OF THE ZA27/GRAPHTIE NANOCOMPOSITES

GÜLER O., ÇUVALCI H., ÇELEBİ M., ÇANAKÇI A.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.683-686

THE EFFECT OF MILLING TIME ON THE MORPHOLOGY AND SIZE OF THE ZA27 BASED COMPOSITE POWDERS

GÜLER O., ÇUVALCI H., ÇELEBİ M., ÇANAKÇI A.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.687-689

Production and Properties of Al2024- 2 wt. (SiC-B4C) HybridNanocomposite

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.
International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1322-1327

Production of Biomaterials by Powder Metallurgy Methods and Applications

ÖZKAYA S., ÇANAKÇI A., ÇELEBİ M., KESKİN Ö. Y.
8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.26-29

Metal Foams Produced by Powder Metallurgy Methods and Applications

ÇANAKÇI A., KESKİN Ö. Y., ÖZKAYA S., ÇELEBİ M.
8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.27-30

A Review on The Powder Coating with Mechanical Milling

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.
3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.228-232

The Effect of Milling Time on the Morphology and Size of ZA27 Based Composite Powders

GÜLER O., ÇUVALCI H., ÇELEBİ M., ÇANAKÇI A.
2. Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.687-689

The Effect of Milling Time on the Physical and Mechanical Properties of the ZA27-Graphite Nano-Composites

GÜLER O., ÇUVALCI H., ÇELEBİ M., ÇANAKÇI A.
2.Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.683-686

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H., GÜLER O., ERDEMİR F.
4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.364-370

Mechanical Properties of ZA27/Graphene Nanocomposites Produced by Powder Metallurgy Method

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., VAROL T., ÇELEBİ M.
4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.371-374

Resistance of ZA27 Matrix Reinforced with Nanographene Particle

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., ÇELEBİ M.
4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.352-357

Ceramic Foams

VAROL T., ÇANAKÇI A., ERDEMİR F., ÇELEBİ M., YALÇIN E. D.
4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.370-380

A Review on the New Armour Ceramic Meterials

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.
4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.381-385

Wear Resistance Of ZA27 Matrix Reinforced with Nanographene Particle

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., ÇELEBİ M.
4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.347-352

Effects Of Alumina Nanoparticle Content On The Microstructure And Mechanical Properties Of ZA27/Al2O3 Nanocomposites Fabricated By Powder Metallurgy

ÇELEBİ M., ÇUVALCI H., ÇANAKÇI A., GÜLER O., VAROL T.
4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.353-358

Effect of Processing Parameters on AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., Keskin Ö. Y., ÇELEBİ M., KARABACAK A. H.
Uluslararası 2. Savunma Sanayi Sempozyumu, 6 - 08 Nisan 2017, ss.636-640

Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams

ÇANAKÇI A., ÖZKAYA S., VAROL T., ÇELEBİ M., KESKİN Ö. Y., KARABACAK A. H.
2nd International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.636-640

CORROSION BEHAVIOR OF ZA27/GRAPHITE/AL2O3 HYBRID NANOCOMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.
XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.541-547

THE EFFECT OF GRAPHITE CONTENT ON THE CORROSION CHARACTERISTIC OF ZA27 ALLOY BASED COMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.
XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.535-540

THE EFFECT OF NANO-Al2O3 CONTENT ON THE CORROSION BEHAVIOUR OF ZA27/Al2O3 NANOCOMPOSITES

Çelebi M., Çuvalcı H., Güler O., Çanakçı A.
XIV. International Corrosion Symposium, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.566-570

The Effect of Graphite Content on the Wear Behavior of ZA27/Al2O3/Graphite Hybrid Nanocomposites

GÜLER O., ÇUVALCI H., ÇANAKÇI A., ÇELEBİ M.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.192-198

The Effect of Nano-Particle Content on the Wear Behavior of ZA27/Al2O3 Nanocomposites

GÜLER O., ÇUVALCI H., ÇANAKÇI A., ÇELEBİ M.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.199-206

MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF ZA27ALLOYS REINFORCED BY NANO-GRAPHITE AND NANO-ALUMINA

Çelebi M., Çuvalcı H., Çanakçı A., Güler O.
3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.400-406

THE EFFECT OF NANO PARTICLE REINFORCEMENT ONMICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZA27/GRAPHITEAND ZA27/Al2O3 COMPOSITES FABRICATED BY HOT PRESSING METHOD

Çelebi M., Çuvalcı H., Çanakçı A., Güler O., Erdemir F.
3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.580-584

THE EFFECT OF AL2O3 CONTENT ON THE WEAR BEHAVIOR OFZA27/Al2O3/GRAPHITE HYBRID NANOCOMPOSITES

Güler O., Çuvalcı H., Çelebi M., Çanakçı A.
3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.558-569

Nano-Parçacık Takviyesinin Mekanik Alaşımlama Yöntemiyle Üretilen Za-27/Al2o3 Kompozitlerinin Mekanik Özelliklerine Etkisi

Çelebi M., Çuvalcı H., Çanakçı A., Güler O.
Symposium of New Technologies in Engineering , Bayburt, Türkiye, 22 - 24 Ekim 2015, ss.204-210

FABRICATION OF NANOGRAPHITE REINFORCED ZA-BASED 27 ALLOY MATRIX COMPOSITES BY MECHANICAL ALLOYING METHOD

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H.
International Porous and Powder Materials, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.101-105

Metrikler

Yayın

79

Atıf (WoS)

150

H-İndeks (WoS)

9

Atıf (Scopus)

155

H-İndeks (Scopus)

9

Proje

7

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları