Prof. Dr. BÜLENT ÖZTÜRK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The structural and mechanical properties of open-cell aluminum foams: Dependency on porosity, pore size, and ceramic particle addition

GÖLBAŞI Z., ÖZTÜRK B., Ullen N. B.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.1009, 2024 (SCI-Expanded)

Exploring the role of Fe in the wear and corrosion resistance of Ti-based alloys produced with conventional powder metallurgy

GÖLBAŞI Z., İÇİN K., Sünbül S. E., ÖZTÜRK B.

Tribology International , cilt.200, 2024 (SCI-Expanded)

Effect of Sn addition on mechanical, wear, and electrochemical properties of Ti-Al-Sn alloys

GÖLBAŞI Z., ÖZTÜRK B., İÇİN K., SÜNBÜL S. E.

Powder Technology , cilt.444, 2024 (SCI-Expanded)

Experimental investigation of the melting performance of a low porosity metal foam/PCM composite heat sink in various configurations

Öztürk B., Gölbaşı Z., Yazıcı M. Y.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.149, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Mechanical, wear and corrosion behavior of Ti-6Al-xNb (x=3.5-21 wt%) alloys manufactured by powder metallurgy

GÖLBAŞI Z., ÖZTÜRK B., SÜNBÜL S. E., İÇİN K.

POWDER TECHNOLOGY , cilt.426, 2023 (SCI-Expanded)

Performance evaluation of machined and powder metallurgically fabricated Crofer (R) 22 APU interconnects for SOFC applications

Topcu A., ÖZTÜRK B., CORA Ö. N.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.47, sa.5, ss.3437-3448, 2022 (SCI-Expanded)

Influence of processing parameters on the porosity, thermal expansion, and oxidation behavior of consolidated Fe22Cr stainless steel powder

ÖZTÜRK B., Topcu A., CORA Ö. N.

POWDER TECHNOLOGY , cilt.382, ss.199-207, 2021 (SCI-Expanded)

Improvement of solid particle erosion resistance of helicopter rotor blade with hybrid composite shield

Özen İ., Gedikli H., Öztürk B.

ENGINEERING FAILURE ANALYSIS , cilt.121, 2021 (SCI-Expanded)

Erosive wear characteristics of E-glass fiber reinforced silica fume and zinc oxide-filled epoxy resin composites

ÖZTÜRK B., GEDİKLİ H., Kilicarslan Y. S.

POLYMER COMPOSITES , cilt.41, sa.1, ss.326-337, 2020 (SCI-Expanded)

The Role of Wheel Surface Quality on Structural and Hard Magnetic Properties of Nd-Fe-B Permanent Magnet Powders

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Karaagac O., Kockar H.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.31, sa.9, ss.3025-3041, 2018 (SCI-Expanded)

Oxidation, electrical and mechanical properties of Crofer (R) 22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy

ÖZTÜRK B., TOPCU A., ÖZTÜRK S., CORA Ö. N.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, sa.23, ss.10822-10833, 2018 (SCI-Expanded)

Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Odabasi H. K., GÖBÜLÜK M., et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.10, ss.5017-5030, 2017 (SCI-Expanded)

Effects of Zinc Borate and Fly Ash on the Mechanical and Tribological Characteristics of Brake Friction Materials

ÖZTÜRK B., MUTLU T.

TRIBOLOGY TRANSACTIONS , cilt.59, sa.4, ss.622-631, 2016 (SCI-Expanded)

Effects of Different Kinds of Fibers on Mechanical and Tribological Properties of Brake Friction Materials

ÖZTÜRK B., ARSLAN F., ÖZTÜRK S.

TRIBOLOGY TRANSACTIONS , cilt.56, sa.4, ss.536-545, 2013 (SCI-Expanded)

Effect of Type and Relative Amount of Solid Lubricants and Abrasives on the Tribological Properties of Brake Friction Materials

Öztürk B., Öztürk S., Adigüzel A. A.

TRIBOLOGY TRANSACTIONS , sa.3, ss.428-441, 2013 (SCI-Expanded)

Characteristics of rapidly solidified Cu-10%Sn alloy powders produced by water jet cooled rotating disc atomisation

ÖZTÜRK S., ÖZTÜRK B., USTA G.

POWDER METALLURGY , cilt.54, sa.5, ss.577-584, 2011 (SCI-Expanded)

Production of rapidly solidified Cu-Sn ribbons by water jet cooled rotating disc method

ÖZTÜRK S., ÖZTÜRK B., ERDEMİR F., USTA G.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.211, sa.11, ss.1817-1823, 2011 (SCI-Expanded)

Production of bronze powders by water jet cooled rotating disc atomisation

ÖZTÜRK S., USTA G., ÖZTÜRK B.

POWDER METALLURGY , cilt.54, sa.3, ss.393-399, 2011 (SCI-Expanded)

Effects of Resin Type and Fiber Length on the Mechanical and Tribological Properties of Brake Friction Materials

ÖZTÜRK B., ÖZTÜRK S.

TRIBOLOGY LETTERS , cilt.42, sa.3, ss.339-350, 2011 (SCI-Expanded)

Hybrid Effect in the Mechanical Properties of Jute/Rockwool Hybrid Fibres Reinforced Phenol Formaldehyde Composites

Ozturk B.

FIBERS AND POLYMERS , cilt.11, sa.3, ss.464-473, 2010 (SCI-Expanded)

Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials

Ozturk B., ARSLAN F., Ozturk S.

TRIBOLOGY INTERNATIONAL , cilt.40, sa.1, ss.37-48, 2007 (SCI-Expanded)

Effect of process parameters on production of metal powders by water jet cooled rotating disc atomisation

Ozturk S., ARSLAN F., OZTURK B.

POWDER METALLURGY , cilt.48, sa.2, ss.163-170, 2005 (SCI-Expanded)

Investigation of milling characteristics of alumina powders milled with a newly designed vibratory horizontal attritor

Kilinc Y., Ozturk S., Ozturk B., Uslan I.

POWDER TECHNOLOGY , cilt.146, sa.3, ss.200-205, 2004 (SCI-Expanded)

Effect of production parameters on cooling rates of AA2014 alloy powders produced by water jet cooled, rotating disc atomisation

Ozturk S., ARSLAN F., OZTURK B.

POWDER METALLURGY , cilt.46, sa.4, ss.342-348, 2003 (SCI-Expanded)

Rotating disc production of aluminum alloy ribbon

ARSLAN F., Ozturk S., OZTURK B.

INTERNATIONAL JOURNAL OF POWDER METALLURGY , cilt.39, sa.2, ss.53-62, 2003 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Investigation on Solid Particle Erosion Performance of Aluminum Alloy Materials for Leading-Edge Slat

Budur A. İ., Özen İ., Öztürk B., Gedikli H.

Tribology in Industry , cilt.46, sa.1, ss.126-140, 2024 (Scopus)

Thermal expansion, porosity, and microhardness properties of solid oxide fuel cell metallic interconnects manufactured by powder metallurgy approach

Topcu A., Yalçın Ö. F., Öztürk B., Cora Ö. N.

Turkish Journal of Electromechanics and Energy , cilt.6, sa.3, ss.123-130, 2021 (Hakemli Dergi)

Aşındırıcı Türü ve Boyutunun Otomotiv Fren Balatalarının Sürtünme-Aşınma Performansına Etkisi

ÖZTÜRK B.

Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.8, sa.2, ss.335-347, 2018 (Hakemli Dergi) Sürdürülebilir Kalkınma

Production of AA 2024 Aluminum Alloy Ribbons by Melt Spinning Process

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.

Turkish Journal of Electromechanics & Energy , sa.2, ss.14-19, 2017 (Hakemli Dergi)

Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

International Journal of Materials Science and Applications , cilt.6, sa.5, ss.241-249, 2017 (Hakemli Dergi)

Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

International Journal of Materials Science and Applications , cilt.6, sa.5, ss.241-249, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Performance Comparison of Machined from Bulk and Fabricated via Powder Metallurgy Approach Crofer®22 APU Interconnects for SOFC Applications

TOPCU A., ÖZTÜRK B., CORA Ö. N.

12th INTERNATIONAL EXERGY, ENERGY AND ENVIRONMENT SYMPOSIUM (IEEES-12), DOHA, Qatar, 20 - 24 Aralık 2020, ss.220-223

Katı Parçacık Erozyon Hasarının Katı Cisimler Mekaniği ve Akışkanlar Dinamiği ile Modellenmesi

BUDUR A. İ., GEDİKLİ H., ÖZTÜRK B.

21.ULUSAL MEKANİK KONGRESİ, Niğde, Türkiye, 2 - 06 Eylül 2019, ss.819-827

DETERMINATION OF OPTIMUM FLOW FIELD FOR SOLID OXIDE FUEL CELL (SOFC) INTERCONNECTS UNDER SPECIFIED CONDITIONS

Topcu A., ÖZTÜRK B., Cora Ö. N.

16th International Conference on Clean Energy (ICCE-2018), Famagusta, Kıbrıs (Kktc), 9 - 11 Mayıs 2018, ss.1-6

Preparation of SrFe12O19 Powders with Mechanosynthesis method

ÖZTÜRK S., Çakıl D. D., İCİN K., SEZER R., Topal U., ÖZTÜRK B.

6th International Conference on Superconductivity and Magnetisim, 29 Nisan - 04 Mayıs 2018, sa.1, ss.422

The Influence of milling Media on Structural and Magnetic properties of Strontium Hexaferrite Powders

ÖZTÜRK S., ÇAKIL D. D., İCİN K., SEZER R., TOPAL U., ÖZTÜRK B.

6th International Conference on Superconductivity and Magnetisim, Antalya, Türkiye, 29 Nisan - 04 Mayıs 2018, cilt.6, sa.1, ss.482

Importance of Microstructure and Powder Size on The Magnetic Features of Nd15Fe77B8 Spherical Shaped Powder

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.112

Production of Rapidly Solidified Mg Based Alloy Ribbons by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., BEYAZIT G., ÖZCAN Ş.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.142

Investigation of Hydriding Properties of Mg80-Ni20 Alloy Ribbons Produced by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., BEYAZIT G., ÖZCAN Ş.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.143

Co Katkılı Nd15Fe76Co2B8 Manyetik Alaşımın Yapısal ve Fiziksel Özelliklerinin İncelenmesi

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.113-114

Magnetic Behaviours of Dendritically Solidified Spherical NdFeB Powders and Surfactant-Active Ball Milled Particles

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.

2nd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Ekim 2017, ss.1281-1293

Effect of Deformation Rate on Electrical and Mechanical Properties of Pure Copper

ÖZTÜRK B., İCİN K., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Ekim 2017, ss.917-923

Analytical Hierarchy Process in Material Selection

ÖZTÜRK B., İCİN K., Şahin Ö., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Ekim 2017, ss.693-700

THE EFFECT OF Mn AMOUNT ON THE SHAPE MEMORY PROPERTIES OF CuAlMn RIBBONS PRODUCED BY MELT SPINNING METHOD

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.67-72

MICROSTRUCTURAL INVESTIGATION OF RAPIDLY SOLIDIFIED Cu(100-x)Al13Mnx (x=1-14) RIBBONS

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17),, Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.187-192

Production Of AA2024 Aluminum Alloy Ribbons By Melt Spinning Process

Öztürk S., Sünbül S. E., Gölbaşı Z., İcin K., Öztürk B.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017

Melt Spinning Yöntemiyle CuAlMn Şeritlerin Üretimi ve Manyetik Özelliklerinin İncelenmesi

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., GÖLBAŞI Z., İCİN K., ÖZTÜRK B.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017

Effects of Tin on the Mechanical and Tribological Properties of Titanium-Based Implant Materials

ÖZTÜRK B., GÖLBAŞI Z., ÖZTÜRK S.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.456-464

Effect of Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

4Th International Conference On Materials Science And Nanotechnology For Next Generation, Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.63

The Influence Of Solidification Rate On Hard Magnetic Properties Rare-Earth Permanent Magnetic Powder

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

4Th International Conference On Materials Science And Nanotechnology For Next Generation, Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.62

Bonding Strength and Fuel Leakage Tests for Crofer®22 Solid Oxide Fuel Cell Metallic Interconnects

ÖZTÜRK B., TOPCU A., ÖZTÜRK S., CORA Ö. N.

Second International Hydrogen Technologies Congress, Adana, Türkiye, 15 - 18 Mart 2017, ss.287-293

Hızlı Katılaştırılmış Nd Fe B Sert Manyetik Tozların Yapısal Termal Ve Manyetik Karakterizasyonu

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.

Internatıonal Energy & Engineering Conference, 13 Ekim 2016

STRUCTURAL THERMAL AND MAGNETİC CHARACTERIZATION OF RAPIDLY SOLIDIFIED Nd Fe B HARD MAGNETİC ALLOY POWDER

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN ODABAŞI H.

INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Türkiye, 13 - 14 Eylül 2016, ss.67-80

HIZLI KATILAŞTIRILMIŞ Nd-Fe-B SERT MANYETİK TOZLARIN YAPISAL,TERMAL VE MANYETİK KARAKTERİZASYONU

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., KAFTELEN H.

INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.68-81

IMPROVEMENT OF MAGNETIC PROPERTIES OF MELT-SPUN PRODUCED Nd2Fe14B PARTICLES DURING SURFACTANT-ASSISTED BALL MILLING

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN H.

INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.220-227

MELT SPİNNİNG METODUYLA AA6060 ALUMINYUM ALAŞIMI TOZ ÜRETİMİNİN İNCELENMESİ

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., EROĞLU M.

International Conference on Material Science and Technology, 6 - 08 Nisan 2016

MELT SPINNING YÖNTEMİYLE AA6060 ALÜMİNYUM ALAŞIMI ŞERİT ÜRETİMİ VE İNCELENMESİ

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., EROĞLU M.

International Conferance on Materials Science and Technology in Cappadocia, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.440-444

EFFECT OF PRODUCTION PARAMETERS ON PHYSICAL PROPERTIES OF THE INTERCONNECT PLATES PRODUCED BY POWDER METALLURGY

ÖZTÜRK B., CORA Ö. N., ÖZTÜRK S., BAKAL A., TOPCU A.

International Conference on Material Science and Technology in Cappadocia (IMSTEC 2016), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.832-837

TOZ METALURJİSİ ÜRETİM PARAMETRELERİNİN İNTERKONNEKTÖR PLAKALARIN FİZİKSEL ÖZELLİKLERİNE ETKİSİ

ÖZTÜRK B., CORA Ö. N., ÖZTÜRK S., BAKAL A., TOPCU A.

International Conference on Material Science and Technology, 06 Nisan 2016

MELT SPİNNİNG YÖNTEMİYLE NdFeB MANYETİK TOZLARIN ÜRETİMİ VE KARAKTERİZASYONU

ÖZTÜRK S., İCİN K., KAFTELEN H., ÖZTÜRK B., TOPAL U., METOĞLU A.

International Conference on Material Science and Technology, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.428-433

INVESTIGATION OF THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF Ti-6Al-XNbALLOYS

Öztürk B., Gölbaşı Z., Cora Ö. N., ÖZTÜRK S.

International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.323-328

PRODUCTION OF AA7075 ALUMINIUM ALLOY RIBBONS BY MELT SPINNING METHOD

ÖZTÜRK S., METOĞLU A., İCİN K., ÖZTÜRK B.

International Porous Powder Materials Symposiım and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.141-145

Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Türkiye, 24 Haziran 2014 - 28 Haziran 2015, ss.78-79

Toz Metalurjisi Yöntemi ile Üretilen İnterkonnektör Plakaların Üretim Parametrelerinin Gözeneklilik ve Isıl Genleşme Katsayılarına Etkisi

ÖZTÜRK B., YALÇIN Ö. F., CORA Ö. N., ÖZTÜRK S., GÖBÜLÜK M.

7th International Powder Metallurgy Conference and Exhibiton, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.80-81

Metrikler

Yayın

Atıf (WoS)

429

H-İndeks (WoS)

Atıf (Scopus)

516

H-İndeks (Scopus)

Atıf (Scholar)

696

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim