Yayınlar & Eserler

Yayın Ağı
Makaleler 17
Tümü (17)
SCI-E, SSCI, AHCI (9)
SCI-E, SSCI, AHCI, ESCI (9)
Scopus (9)
TRDizin (5)
Diğer Yayınlar (3)

1. Shear Resistance and Surface Design of 3D Printed Dowels Made from Different Materials in Glued Scots Pine Furniture Joints

DEMİREL S., Koylu B., Mteraf N., ÇAVA K., ASLAN M.
BioResources , cilt.20, sa.2, ss.4204-4215, 2025 (SCI-Expanded) identifier

2. Impact of Cell Design Parameters on Mechanical Properties of 3D-Printed Cores for Carbon Epoxy Sandwich Composites

ASLAN M., ÇAVA K., UŞUN A., GÜLER O.
Polymers , cilt.17, sa.1, 2025 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

3. Examine the mechanical properties of woven glass fiber fabric reinforced composite plate manufactured with vat-photopolymerization

Çava K., İpek H., Uşun A., Aslan M.
POLYMER COMPOSITES , cilt.45, sa.18, ss.17105-17120, 2024 (SCI-Expanded, Scopus) identifier identifier

4. Fabrication and Radiation Shielding Properties of (HDPE/Colemanite)-(HDPE/Bi2O3) Multi-Layer Composites

UZUN DURAN S., ALVER Ü., Demirkoez M. B., Mucogllava B., ÇAVA K., ASLAN M., et al.
POLYMERS FOR ADVANCED TECHNOLOGIES , cilt.35, sa.11, 2024 (SCI-Expanded, Scopus) identifier identifier

5. Effect of the Ag coated ABS granules and hot-pressing temperature on the microstructure evolution and properties of novel Ag/ABS composites

Akçay S. B., Kocaman M., Güler O., Ömür F. D., Varol T., Aslan M., et al.
Surfaces and Interfaces , cilt.51, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

6. Surface and Mechanical Properties of 3D-Printed Biocompatible ABS Polymers

Aslan M., Çava K., Ipek H., Kumaran S. T., Kalusuraman G., Uthayakumar M., et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.33, sa.13, ss.6398-6407, 2024 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

7. Crushing response of triply periodic minimal surface structures fabricated by investment casting and powder bed fusion method

Özen İ., Çava K., İpek H., Sezer R., Aslan M.
MATERIALS TODAY COMMUNICATIONS , cilt.38, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

8. Improvement of the Working Volume and the Applications of Retractors Used in Surgical Operations

Cinel A., Ipek H., Uşun A., Çava K., Aslan M.
Farabi Tıp Dergisi , cilt.3, sa.1, ss.14-23, 2024 (Hakemli Dergi)

9. The performance of 3d printed dowel with three different surface designs in furniture joints

Demirel S., Kuvel N. T., Çava K., Aslan M.
TURKISH JOURNAL OF FORESTRY , cilt.25, sa.1, ss.100-106, 2024 (Hakemli Dergi) identifier

10. Otomotiv Sektöründe Bilyalı Mafsal Yatak Uygulamaları İçin Polioksimetilen (POM) Malzemelerin Aşınma Özelliklerinin Karşılaştırmalı Analizi

YAZGAN A., SERT Y., KÜÇÜKÖMEROĞLU T., TAŞÇIOĞLU M. E., ÇAVA K., ASLAN M.
Orclever Science and Research Group , cilt.3, sa.1, ss.197-206, 2023 (Hakemli Dergi)

11. Ulexite/HDPE-Bi2O3/HDPE layered composites for neutron and gamma radiation shielding

ALVER Ü., UZUN DURAN S., DEMİRKÖZ M. B., Mucogllava B., ASLAN M., ÇAVA K., et al.
APPLIED RADIATION AND ISOTOPES , cilt.200, 2023 (SCI-Expanded, Scopus) identifier identifier identifier

12. INVESTIGATING PRINTABILITY AND MECHANICAL PERFORMANCE OF 3D PRINTED RECYCLED PET WITH PLA AND TPU HYBRID ADDITIVES

Çava K., Aslan M.
International Journal of 3D Printing Technologies and Digital Industry , cilt.7, sa.2, ss.252-258, 2023 (TRDizin) identifier

13. Does the traditional or digital dental model measurement method affect the results?: A validation study

KARSLI N., YURDAKUL Z., GONCA M., ÇAVA K.
European annals of dental sciences (Online) , cilt.50, sa.2, ss.87-93, 2023 (Hakemli Dergi) identifier

14. Characterisation of 3D Printed Hydroxyapitate Powder (HAp) Filled Polylacticacid (PLA) Composites

Yerli H. K., ÇAVA K., ASLAN M.
International Journal of 3D Printing Technologies and Digital Industry , cilt.6, sa.3, ss.540-547, 2022 (Hakemli Dergi) Creative Commons License identifier

15. Low-energy impact response of composite sandwich panels with thermoplastic honeycomb and reentrant cores

Özen İ., Çava K., Gedikli H., Alver Ü., Aslan M.
THIN-WALLED STRUCTURES , cilt.156, 2020 (SCI-Expanded) identifier identifier

16. Compression Properties of 3d Printed Honeycomb and Re-Entrant Sandwich Core Materials

ÇAVA K., ASLAN M., ALVER Ü., GEDİKLİ H., Kalusuraman G.
SSRN Electronic Journal , 2020 (Hakemli Dergi)

17. DIMENSIONAL ACCURACYAND PULL-OUT PERFORMANCE OF3D PRINTED VERTEBRA MODELS

ASLAN M., çava K., Yerli H. K.
Ankara Üniversitesi Tıp Fakültesi Mecmuası , cilt.71, sa.1, ss.22-23, 2018 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 31

1. BT Tabanlı Tasarım Ve Metal Katmanlı İmalat Kullanılarak Sağ Mandibula Rekonstrüksiyonu için Kişiselleştirilmiş Gonial İmplant

Aksa H. C., Uşun A., Çava K., İpek H., Aslan M.
Ulusal İleri Malzemeler ve Eklemeli İmalat Teknolojileri Konferansı, Sivas, Türkiye, 22 - 24 Ekim 2025, ss.1, (Tam Metin Bildiri)

2. PRODUCTION OF HYBRID THERMOPLASTIC COMPOSITES REINFORCED WITH HEMP AND BASALT/CARBON FABRICS FOR AUTOMOTIVE INTERIOR TRIM PANELS AND DETERMINATION OF ENERGY ABSORBTION BEHAVİOR

Aslan M., Yalçın M. E., Tülek M. G., Çava K., İpek H.
6th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM AND WORKSHOPS, İzmir, Türkiye, 2 - 04 Ekim 2025, ss.1-10, (Özet Bildiri) Creative Commons License

3. DİJİTAL IŞIK İŞLEME (DLP) YÖNTEMİYLE ÜRETİLEN FARKLI KATMAN NUMARALARINA SAHİP 0/90 YÖNLENDİRMELİ CAM ELYAF TAKVİYELİ KOMPOZİT YÜZEY LEVHALARININ MEKANİK ÖZELLİKLERİNİN KARŞILAŞTIRMALI İNCELENMESİ

Uslu U., Çava K., Uşun A., İpek H., Gümrük R., Aslan M.
6th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM AND WORKSHOPS, İzmir, Türkiye, 2 - 04 Ekim 2025, ss.1, (Tam Metin Bildiri)

4. Design and Production of a Reusable Ergonomic Video Laryngoscop

Hacıalioğlu Ş., Çava K., Başer O., İpek H., Küçük A. O., Uşun A., et al.
4. SİVAS ULUSLARARASI BİLİMSEL ARAŞTIRMALAR VE İNOVASYON KONGRESİ, Sivas, Türkiye, 30 - 31 Mayıs 2025, ss.1-11, (Tam Metin Bildiri)

5. Production of Hybrid Thermoplastic Composites Reinforced with Hemp and Basalt/Carbon Fabrics for Automotive Interior Trim Panels and Determination of Their Mechanical and Thermal Properties

Tülek M. G., Aslan M., Yalçın M. E., Çava K., İpek H.
4. SİVAS ULUSLARARASI BİLİMSEL ARAŞTIRMALAR VE İNOVASYON KONGRESİ, Sivas, Türkiye, 30 - 31 Mayıs 2025, ss.1-11, (Tam Metin Bildiri)

6. PRODUCTION OF HYBRID THERMOPLASTIC COMPOSITES REINFORCED WITH HEMP AND BASALT/CARBON FABRICS FOR AUTOMOTIVE INTERIOR TRIM PANELS AND DETERMINATION OF THEIR MECHANICAL AND THERMAL PROPERTIES

Tülek M. G., Aslan M., Yalçın M. E., Çava K., İpek H.
SIVAS INTERNATIONAL CONFERENCE ON SCIENTIFIC AND INNOVATION RESEARCH-IV, Sivas, Türkiye, 30 - 31 Mayıs 2025, ss.789-807, (Tam Metin Bildiri)

7. COMPRESSION BEHAVIOR OF DIGITAL LIGHT PROCESSING PRINTED SANDWICH PANEL CORES

Çava K., Uşun A., İpek H., Aslan M., Hacıalioğlu Ş.
Additive Manufacturing Conference, Antalya, Türkiye, 28 - 30 Nisan 2025, ss.118, (Özet Bildiri)

8. Production of a Personalized Orbital Reconstruction Prosthesis from Ct Images Using the Powder Bed Fusion Process Method

Uşun A., Aksa H. C., Çava K., Varol T., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

9. INVESTIGATION OF SOFT MAGNETIC NANOPARTICLE-INFUSED PLA FILAMENTS: MAGNETIC AND MECHANICAL CHARACTERIZATION

Çava K., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 09 Ağustos 2024, ss.1-10, (Tam Metin Bildiri)

10. Examination of 3D Printing Pattern's Wear Performance in Glass Fiber-reinforced Polyamide (GFRPA)

İpek H., Çava K., Uşun A.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri)

11. A Research on the Recyclability of Abs Thermoplastic Material and its Reusability in 3D Printers

Çava K., Dudak G. Ç., Uşun A., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

12. THE EFFECT OF DIFFERENT PRE TREATMENT APPLICATIONS ON SURFACE FREE ENERGY AND WETTABILITY OF GLASS FIBER REINFORCED POLYAMIDE COMPOSITE

Aslan M., Öztürk M., Kocaman M., Çava K., Çuvalcı H.
The 5th International Conference of Materials and Engineering Technology (TICMET'23) , Trabzon, Türkiye, 13 Kasım 2023, ss.425, (Özet Bildiri)

13. PRODUCTION OF A PERSONALIZED MANDIBLE PROSTHESIS FROM CT IMAGES USING THE POWDER BED FUSION PROCESS METHOD

Aksa H. C., Çava K., Uşun A., İpek H., Aslan M.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, ss.27, (Özet Bildiri)

14. INVESTIGATION OF THE COMPRESSION BEHAVIOR OF THE ADDITIVELY MANUFACTURED GLASS-FIBER REINFORCED COMPOSITES VIA VAT-PHOTOPOLYMERIZATION

Çava K., İpek H., Uşun A., Aksa H. C., Aslan M.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, ss.26, (Özet Bildiri)

15. Comparative Analysis of Mechanical Performance in Homopolymer and Copolymer Polyoxymethylene (POM) Materials

Yazgan A., ÇAVA K., Taşcıoğlu M. E., ASLAN M.
Conference Proceedings of International Symposium on Automotive Science and Technology (ISASTECH), Ankara, Türkiye, 07 Eylül 2023, cilt.3, ss.268-272, (Tam Metin Bildiri)

16. Design of an Apparatus for Measuring Capillary Refill Time

Aksa H. C., Küçük A. O., Toygar U., Uşun A., Çava K., Hacıalioğlu Ş.
4th Baskent International Conference On Multidisciplinary Studies, Ankara, Türkiye, 4 - 06 Ağustos 2023, ss.1-7, (Tam Metin Bildiri)

17. PRODUCTION OF CELESTITE POWDER ADDED POLYMER COMPOSITE FOR THYROID PROTECTIVE COLLAR DESIGN AND INVESTIGATION OF GAMMA RAY SHIELDING CHARACTERISTICS

Özpınar İ., Çava K., Aslan M., Alver Ü., Apaydın G.
V. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, İstanbul, Türkiye, 15 - 16 Ocak 2023, ss.1053-1062, (Tam Metin Bildiri)

18. DEVELOPMENT OF PLA/TPU COMPOSITE FILAMENT FOR FDM (FFF) TYPE ADDITIVE MANUFACTURING METHOD AND INVESTIGATION OF THE MECHANICAL PROPERTIES OF THE MANUFACTURED PARTS

Çava K., Yaman Y., Özpınar İ., Aslan M., İpek H.
Middle East International Conference on Contemporary Scientific Studies-VIII, Adana, Türkiye, 7 - 08 Ocak 2023, ss.152-161, (Tam Metin Bildiri) Creative Commons License

19. İki farklı dijital yazılım sisteminin doğruluğu, güvenilirliği ve tekrarlanabilirliği: Dental model analizlerinin karşılaştırılması

KARSLI N., YURDAKUL Z., GONCA M., ÇAVA K.
18th International Turkish Orthodontic Society Congress, Antalya, Türkiye, 16 - 20 Kasım 2022, ss.201, (Özet Bildiri)

20. Investigation of Impact Behavior of Sandwich Materials with 3D Printed Auxetıc and Cellular Core Geometries

Özen İ., Çava K., Gedikli H., Alver Ü., Aslan M.
INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019, (Tam Metin Bildiri)

21. Effect of Acetone Vapor on Surface and Mechanical Properties of 3D Printed ABS in Different Layer Thicknesses

Çava K., Aslan M., Alver Ü.
INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019, (Tam Metin Bildiri)

22. Comparison of Mechanical Properties of 3D Printed Sandwich Materials in Cellular and Auxetic Pattern

ASLAN M., çava K., ALVER Ü., GEDİKLİ H.
INTERNATIONAL MATERIALS TECHNOLOGIESAND METALLURGY CONFERENCE 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019, (Tam Metin Bildiri)

23. COMPRESSSİON BEHAVİOR OF AUXETİC AND HONEYCOMB CORE MATERİALS MANUFACTURES BY FDM PRİNTER

çava K., ASLAN M., ALVER Ü., GEDİKLİ H.
4th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2019, Antalya, Türkiye, 11 - 14 Nisan 2019, (Tam Metin Bildiri)

24. The effect of printing parameters on the shear strength of the 3d printed PLA samples

İPEK h., GÜLER O., Çava k., ASLAN M.
International Technological Sciences and Design Sympossium, 27 Haziran 2018 - 29 Haziran 2019, (Tam Metin Bildiri)

25. Parameters Of The Shear Strength Of The 3-D Printed Pla Samples

GÜLER O., İpek H., ASLAN M., ÇAVA K.
International Tecnological Sciences and Design Symposium, 27 - 29 Haziran 2018

26. DIMENSIONAL ACCURACYAND PULL-OUT PERFORMANCE OF3D PRINTED VERTEBRA MODELS

ASLAN M., Çava k., YERLİ H. K., YAZAR U., ALVER Ü.
International Symposium on 3D Printing in Medicine, Ankara, Türkiye, 16 - 17 Kasım 2018, (Tam Metin Bildiri)

27. INVESTIGATION OF EFFECT OF LAYER THİCKNESS AND FAN SPEED ON MECHANICAL, SURFACE AND MICROSCOBIC PROPERTIES OF 3D PRINTED ABS POLYMERS

ASLAN M., ALVER Ü., GÜLER O., ÇAVA K.
INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES 3D-PTS2017, İstanbul, Türkiye, 3 - 04 Nisan 2017, (Tam Metin Bildiri)

28. An Investigation on Mechanical Properties of the Sandwich Panel Composites

ASLAN M., GÜLER O., CAVA K., ALVER Ü., YÜCELOĞLU E.
2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, ss.143, (Özet Bildiri)

29. Mechanical Performance of Laminar and Tubular Carbon Epaxy Prepreg Composites by Vacum Bag Oven Method

ASLAN M., GÜLER O., CAVA K., ALVER Ü.
2nd International Defense Industry Symposium, 6 - 08 Nisan 2017, ss.144, (Özet Bildiri)

30. An Investigation on the Mechanical Properties of the Sandwich Panel Composites

Aslan M., Güler O., Çava K., Alver Ü., Yüceloğlu E.
II. International Defense Industry Symposium, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.602-610, (Tam Metin Bildiri)

31. Investigation of Effect of Layer Thickness and Fan Speed on Mechanical, Surface and Microscopic Properties of 3D Printed ABS Polymers

ASLAN M., GÜLER O., ALVER Ü., ÇAVA K.
2nd International Symposium on 3D Printing Technologies (3D-PTS2017), 3 - 04 Nisan 2017
Kitaplar 5

1. EXAMINATION OF 3D PRINTING PATTERN'S WEAR PERFORMANCE IN GLASS FIBER REINFORCED POLYAMIDE (GFRPA)

İpek H., Çava K., Uşun A.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

2. PRODUCTION OF A PERSONALIZED ORBITAL RECONSTRUCTION PROSTHESIS FROM CT IMAGES USING THE POWDER BED FUSION PROCESS METHOD

Uşun A., Aksa H. C., Çava K., Varol T., Aslan M.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

3. A RESEARCH ON THE RECYCLABILITY OF ABS THERMOPLASTIC MATERIAL AND ITS REUSABILITY IN 3D PRINTERS

Çava K., Dudak G. Ç., Uşun A., Aslan M.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

4. INTEGRATION OF 3D MODELS INTO BIOLOGY EDUCATION: NEPHRON MODEL EXAMPLE

Aslan A., Aslan M., Çava K.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

5. INVESTIGATION OF SOFT MAGNETIC NANOPARTICLE-INFUSED PLA FILAMENTS: MAGNETIC AND MECHANICAL CHARACTERIZATION

Çava K., Aslan M.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025
Metrikler

Yayın

53

Yayın (WoS)

9

Yayın (Scopus)

9

Atıf (WoS)

102

H-İndeks (WoS)

4

Atıf (Scopus)

119

H-İndeks (Scopus)

4

Atıf (Scholar)

164

H-İndeks (Scholar)

6

Atıf (TrDizin)

2

H-İndeks (TrDizin)

1

Atıf (Sobiad)

2

H-İndeks (Sobiad)

1

Atıf (Diğer Toplam)

20

Toplam Atıf Sayısı

126

Proje

22

Fikri Mülkiyet

7

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları