Dr. Öğr. Üyesi MOHSEN SABOKTAKIN RIZI | AVESİS

Akademik Veri Yönetim Sistemi

Yayınlar & Eserler

Makaleler 27

1. Strength-ductility synergy in FeMnCoCrC high entropy alloys through Nb addition and tailoring carbide morphology

SABOKTAKIN RIZI M., Ebrahimian M., Minouei H., Shim S. H., VAROL T., GÜLER O., et al.

Journal of Alloys and Compounds , cilt.1044, 2025 (SCI-Expanded, Scopus)

2. Substitutional silicon content effect on the structural/mechanical modification of metastable triplex high entropy alloys

Lee B. J., Shim S. H., Rizi M., Noh H., Lee H. B., Hong S., et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , cilt.232, ss.43-57, 2025 (SCI-Expanded, Scopus)

3. Investigating the effects of Mo addition and microstructural tailoring on the mechanical behavior of FeMnCoCr high-entropy alloy thin films

Minouei H., Kheradmandfard M., Rizi M., Ebrahimian M., Han J., Kim D., et al.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.1020, 2025 (SCI-Expanded, Scopus)

4. NiNbTi(Al/Si) medium-entropy amorphous alloys with enhanced mechanical and thermal properties

Minouei H., Rizi M., Kheradmandfard M., Shim S. H., Hong S. I., Park N.

INTERMETALLICS , cilt.178, 2025 (SCI-Expanded, Scopus)

5. Microstructure evolution and mechanical properties of CoCrFeMnNi HEA-MXene composites prepared by spark plasma sintering

Kang M., Rizi M., Jo S., Ebrahimian M., Nersisyan H., Lee J. H., et al.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.1010, 2025 (SCI-Expanded, Scopus)

6. Enhancing mechanical properties in Ti-Containing FeMn₄₀Co₁₀Cr₁₀C_0.5 High-Entropy alloy through Chi (χ) phase dissolution and precipitation hardening

Rizi M., Ebrahimian M., Minouei H., Shim S. H., Pouraliakbar H., Fallah V., et al.

MATERIALS LETTERS , cilt.377, 2024 (SCI-Expanded, Scopus)

7. Effects of molybdenum on hot deformation behavior and microstructural evolution of Fe₄₀Mn₄₀Co₁₀Cr₁₀C_0.5 high entropy alloys

Ebrahimian M., Rizi M., Hong S. I., Kim J. H.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS , cilt.24, sa.1, 2023 (SCI-Expanded, Scopus)

8. Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties

Shim S. H., Pouraliakbar H., Minouei H., Rizi M., Fallah V., Na Y., et al.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.954, 2023 (SCI-Expanded, Scopus)

9. Rapid microwave-assisted synthesis and magnetic properties of high-entropy spinel (Cr0.2Mn0.2Fe0.2Co0.2-xNi0.2Znx)3O4 nanoparticles

Minouei H., Jalaly M., Kheradmandfard M., Rizi M., Kim D., Hong S. I.

CERAMICS INTERNATIONAL , cilt.49, sa.8, ss.11885-11892, 2023 (SCI-Expanded, Scopus)

10. Supporting data for strengthening and deformation behavior of as-cast CoCrCu_1.5MnNi high entropy alloy with micro-/nanoscale precipitation

Shim S. H., Pouraliakbar H., Lee B. J., Kim Y. K., Rizi M., Han J. H., et al.

DATA IN BRIEF , cilt.45, 2022 (ESCI, Scopus)

11. Microstructural evolution, metallurgical reactions, and the mechanical properties of pure titanium and carbon steel sheets bonded via hot-roll diffusion with a nickel interlayer

Lin C., Rizi M.

CANADIAN METALLURGICAL QUARTERLY , cilt.61, sa.4, ss.377-388, 2022 (SCI-Expanded, Scopus)

12. Strengthening and deformation behavior of as-cast CoCrCu_1.5MnNi high entropy alloy with micro-/nanoscale precipitation

Shim S. H., Pouraliakbar H., Lee B. J., Kim Y. K., Rizi M., Hong S. I.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.853, 2022 (SCI-Expanded, Scopus)

13. Effects of carbon and molybdenum on the nanostructural evolution and strength/ductility trade-off in Fe₄₀Mn₄₀Co₁₀Cr₁₀ high-entropy alloys

Rizi M., Minouei H., Lee B. J., Toroghinejad M. R., Hong S. I.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.911, 2022 (SCI-Expanded, Scopus)

14. Data supporting the hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy

Rizi M., Minouei H., Lee B. J., Pouraliakbar H., Toroghinejad M. R., Hong S. I.

DATA IN BRIEF , cilt.42, 2022 (ESCI, Scopus)

15. Effects of temperature on interfacial evolution and mechanical properties of pure titanium and carbon steel sheets bonded via new multi-pass continuous hot-roll diffusion with nickel interlayer

Lin C., Rizi M., Chen C.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.119, sa.5-6, ss.2811-2823, 2022 (SCI-Expanded, Scopus)

Creative Commons License

16. Formation mechanism of high-entropy spinel thin film and its mechanical and magnetic properties: Linking high-entropy alloy to high-entropy ceramic

Minouei H., Kheradmandfard M., Rizi M., Jalaly M., Kim D., Hong S. I.

APPLIED SURFACE SCIENCE , cilt.576, 2022 (SCI-Expanded, Scopus)

17. Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy

Rizi M., Minouei H., Lee B. J., Pouraliakbar H., Toroghinejad M. R., Hong S. I.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.824, 2021 (SCI-Expanded, Scopus)

18. Microstructure evolution and mechanical properties of (CoCrNi)₉₀(AlTiZr)₅(CuFeMo)₅ multicomponent alloy: A pathway through multicomponent alloys toward new superalloys

Pouraliakbar H., Shim S. H., Kim Y. K., Rizi M., Noh H., Hong S. I.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.860, 2021 (SCI-Expanded, Scopus)

19. Effect of residual nanocrystals on thermal stability and mechanical properties of metalloid-containing amorphous alloys

Minouei H., Rizi M., Akbari G., Hong S. I.

MATERIALS CHARACTERIZATION , cilt.173, 2021 (SCI-Expanded, Scopus)

20. A study on the surface severe plastic deformation and corrosion behavior of an interstitial free steel

Eskandari H., Rizi M., Ghanbari A., Nasiri B., Dehghani K.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.12, 2019 (SCI-Expanded, Scopus)

21. A Comprehensive Study of Diffusion Bonding of Mg AZ31 to Al 5754, Al 6061 and Al 7039 Alloys

Jafarian M., Rizi M., Jafarian M., Zare H., Javadinejad H. R.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.71, sa.12, ss.3011-3020, 2018 (SCI-Expanded, Scopus)

22. The Effect of Time and Temperature of Nitridation-Oxidation Process on Properties and Corrosion Resistance of AISI 316L Steel

Yazdkhasti M., Hosseini S. A., Javadinejad H., Zare H., Rizi M., Abedi H.

SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY , cilt.54, sa.5, ss.508-517, 2018 (ESCI, Scopus)

23. Effect of Intermetallic Compounds on Microstructure and Mechanical Properties of Hot Roll Bonding Titanium to Steel

Rizi M., Javadinejad H. R., Aghababaei E., Ebrahimian M.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.71, sa.8, ss.1941-1950, 2018 (SCI-Expanded, Scopus)

24. Synthesis of Nono-Crystalline Aluminum Carbide Using Thermal Treatment of Mechanically Activated Al and Graphite Mixture

Mohsen S. R., Hamidreza J., Sayed Ahmad H., Ebrahim A.

JOURNAL OF NANO RESEARCH , cilt.53, ss.54-63, 2018 (SCI-Expanded, Scopus)

25. Thermal Stability of Nano-Hydroxyapatite Synthesized via Mechanochemical Treatment

Javadinejad H. R., Rizi M., Mobarakeh E. A., Ebrahimian M.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.42, sa.10, ss.4401-4408, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

26. Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding

Jafarian M., Rizi M., Jafarian M., Honarmand M., Javadinejad H. R., Ghaheri A., et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.666, ss.372-379, 2016 (SCI-Expanded, Scopus)

27. EFFECT OF A Mo ADDITION ON THE PROPERTIES OF HIGH-Mn STEEL

Razavi G. R., Rizi M., Zadeh H. M.

MATERIALI IN TEHNOLOGIJE , cilt.47, sa.5, ss.611-614, 2013 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 1

1. Optimization Electro Discharge Machining of Ti-6Al-4V Alloy With Silicon Carbide Powder Mixed

Rizi M., Razavi G. R., Ostadmohamadi M., Havaie A. R.

International Conference on Machine Design and Manufacturing Engineering (ICMDME 2012), Jeju Island, Güney Kore, 11 - 12 Mayıs 2012, cilt.566, ss.466-467, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Sürdürülebilir Kalkınma

Metrikler

Yayın

28

Yayın (WoS)

28

Yayın (Scopus)

28

Atıf (WoS)

640

H-İndeks (WoS)

15

Atıf (Scopus)

676

H-İndeks (Scopus)

14

Atıf (Scholar)

809

H-İndeks (Scholar)

16

Açık Erişim

1

BM Sürdürülebilir Kalkınma Amaçları