Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Buckling behavior of cold-formed steel sigma and lipped channel section beam-columns: Experimental and numerical investigation

YILMAZ Y., Öztürk F., DEMİR S.
Journal of Constructional Steel Research , cilt.214, 2024 (SCI-Expanded) identifier

Buckling and fracture behavior of cold formed carbon/stainless steel tubular braces under far field and near fault loadings

Demir S., Ikram M., Yılmaz Y., Soalih H.
Journal of Constructional Steel Research , cilt.214, 2024 (SCI-Expanded) identifier

Mechanical properties of quenched and tempered steel welds

UZUNALİ U. Y., ÇUVALCI H., ATMACA B., DEMİR S., ÖZKAYA S.
MATERIALS TESTING , cilt.64, sa.11, ss.1662-1674, 2022 (SCI-Expanded) identifier identifier

A new type notched slab approach for timber-concrete composite construction: Experimental and numerical investigation

YILMAZ S., KARAHASAN O. Ş., ALTUNIŞIK A. C., VURAL N., DEMİR S.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.81, sa.6, ss.737-750, 2022 (SCI-Expanded) identifier identifier

Assessment of Structural Damage Following the October 30, 2020 Aegean Sea Earthquake and Tsunami

ALTUNIŞIK A. C., ATMACA B., Kartal M. E., GÜNAYDIN M., DEMİR S., Ulusan A.
JOURNAL OF EARTHQUAKE AND TSUNAMI , cilt.15, sa.06, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Performance Evaluation of Reinforced Concrete Buildings During the Sivrice-Elazig Earthquake (M-w=6.8, January 24, 2020) in Accordance with Turkish Earthquake Code

DEMİR S., GÜNAYDIN M., ATMACA B., ALTUNIŞIK A. C., HÜSEM M., ADANUR S., et al.
JOURNAL OF EARTHQUAKE AND TSUNAMI , cilt.15, sa.04, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Experimental investigation of a prefabricated timber-concrete composite floor structure: Notched-slab approach

Yılmaz S., Demir S., Vural N.
ADVANCES IN CONCRETE CONSTRUCTION , cilt.12, sa.1, ss.13-23, 2021 (SCI-Expanded) identifier identifier

Seismic damage assessment of masonry buildings in Elazig and Malatya following the 2020 Elazig-Sivrice earthquake, Turkey

GÜNAYDIN M., ATMACA B., DEMİR S., ALTUNIŞIK A. C., HÜSEM M., ADANUR S., et al.
BULLETIN OF EARTHQUAKE ENGINEERING , cilt.19, sa.6, ss.2421-2456, 2021 (SCI-Expanded) identifier identifier

Field Investigation on the Performance of Mosques and Minarets during the Elazig-Sivrice Earthquake

ATMACA B., DEMİR S., GÜNAYDIN M., ALTUNIŞIK A. C., HÜSEM M., ATEŞ Ş., et al.
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES , cilt.34, sa.6, 2020 (SCI-Expanded) identifier identifier identifier

Sandwich type cold formed tubular braces: design, analysis and cyclic loading test

DEMİR S., DURMUŞ DEMİR A., HÜSEM M.
Structures , cilt.25, ss.35-46, 2020 (SCI-Expanded) identifier identifier

Determination of Direct Tensile Strength Values of Rock Materials by a New Test Method of Drilled Disc Tension

Komurlu E., DEMİR S.
PERIODICA POLYTECHNICA-CIVIL ENGINEERING , cilt.64, sa.1, ss.33-41, 2020 (SCI-Expanded) Creative Commons License identifier identifier

The cyclic behavior of steel-polyoxymethylene composite braces

DEMİR S.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.70, sa.5, ss.591-600, 2019 (SCI-Expanded) identifier identifier

Drilled Core Specimen Testing Method for Determination of Tensile Strength Values of Rock Materials

Komurlu E., DEMİR S.
PERIODICA POLYTECHNICA-CIVIL ENGINEERING , cilt.63, sa.1, ss.18-24, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Length Effect on Load Bearing Capacities of Friction Rock Bolts

Komurlu E., DEMİR S.
PERIODICA POLYTECHNICA-CIVIL ENGINEERING , cilt.63, sa.3, ss.718-725, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Saw type seismic energy dissipaters: development and cyclic loading test

Demir S., Hüsem M.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH , cilt.150, ss.264-276, 2018 (SCI-Expanded) identifier identifier

Experimental Determination of Cohesion and Internal Friction Angle on Conventional Concretes

Pul S., Ghaffari A., Oztekin E., Hüsem M., Demir S.
ACI MATERIALS JOURNAL , cilt.114, ss.407-416, 2017 (SCI-Expanded) identifier identifier

Diagonal bracing of steel frames with multi-cable arrangements

HÜSEM M., DEMİR S., Park H. G., Cosgun S. I.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.59, sa.6, ss.1121-1137, 2016 (SCI-Expanded) identifier identifier

Experimental and numerical analyses on determination of indirect (splitting) tensile strength of cemented paste backfill materials under different loading apparatus

Komurlu E., KESİMAL A., DEMİR S.
GEOMECHANICS AND ENGINEERING , cilt.10, sa.6, ss.775-791, 2016 (SCI-Expanded) identifier identifier

The behaviour of high-strength reinforced concrete columns under low eccentric loading

HÜSEM M., PUL S., Gorkem S. E., DEMİR S.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING , cilt.20, sa.4, ss.486-502, 2016 (SCI-Expanded) identifier identifier

Effect of Adhesive Type on the Measurement of Modulus of Elasticity Using Electrical Resistance Strain Gauges

Komurlu E., CİHANGİR F., KESİMAL A., DEMİR S.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.41, sa.2, ss.433-441, 2016 (SCI-Expanded) identifier identifier

Experimental and numerical study on determination of indirect (splitting) tensile strength of rocks under various load apparatus

Komurlu E., KESİMAL A., DEMİR S.
CANADIAN GEOTECHNICAL JOURNAL , cilt.53, sa.2, ss.360-372, 2016 (SCI-Expanded) identifier identifier

Investigation of bond-slip modeling methods used in FE analysis of RC members

DEMİR S., HÜSEM M.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.56, sa.2, ss.275-291, 2015 (SCI-Expanded) identifier identifier

Failure analysis of steel column-RC base connections under lateral cyclic loading

DEMİR S., HÜSEM M., PUL S.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.50, sa.4, ss.459-469, 2014 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Investigation of a new drilling design for loading core specimens with triple holes to determine direct tensile strength values of rock materials

KÖMÜRLÜ E., DEMİR S.
Material Design Processing Communications , cilt.3, ss.1-10, 2021 (Scopus) identifier

Lessons learned from the past earthquakes on building performance in Turkey

ATMACA B., DEMİR S., GÜNAYDIN M., ALTUNIŞIK A. C., HÜSEM M., ATEŞ Ş., et al.
Journal of Structural Engineering Applied Mechanics , cilt.3, sa.2, ss.61-84, 2020 (Hakemli Dergi)

Kaya Kütlesi Poisson Oranı ve Elastisite Modulü Değerlerinin Tünel Etrafındaki Plastik Zon Sınırları üzerinde Etkileri

KÖMÜRLÜ E., DEMİR S.
MT Bilimsel , cilt.16, ss.15-23, 2019 (Hakemli Dergi)

USE OF ROCK MASS RATING (RMR) VALUES FOR SUPPORT DESIGNS OF TUNNELS EXCAVATED IN SOFT ROCKS WITHOUT SQUEEZING PROBLEM

KÖMÜRLÜ E., DEMİR S.
GeoScience Engineering , cilt.65, sa.2, ss.1-17, 2019 (Hakemli Dergi)

Çelik Tel Örgülerin Betonarme Kirişlerin Kesme Davranışına Etkisi

DEMİR S.
DÜZCE ÜNİVERSİTESİ BİLİM VE TEKNOLOJİ DERGİSİ , cilt.7, sa.1, ss.477-487, 2019 (Hakemli Dergi)

Finite Element Analysis of RC Beams Include BondSlip Effect

DEMİR S., HÜSEM M.
International Journal of Structural Analysis Design – IJSAD , cilt.1, sa.3, ss.152-156, 2014 (Hakemsiz Dergi)

The Experimental Investigation of Crack Mechanism in High Strength Concrete with Steel and Polypropylene Fiber

HÜSEM M., DEMİR S.
International Journal of Structural Analysis and Design , cilt.1, sa.3, ss.147-151, 2014 (Hakemli Dergi)

THE EFFECT OF FRACTURE AND CRACK GROWTH OF STEEL AND POLYPROPYLENE FIBERS IN THE ORDINARY AND HIGH STRENGTH CONCRETE

HÜSEM M., DEMİR S.
E-Journal of New World Sciences Academy , cilt.8, sa.4, ss.182-191, 2013 (Hakemsiz Dergi)

Tarihi Yapılarda Onarım-Güçlendirme Yöntemlerinin Uygulanması ve Etkinliği

HÜSEM M., DEMİR S.
TMMOB İnşaat Mühendisleri Odası Trabzon Şubesi Mühendislik Bülteni , sa.27, ss.44-48, 2013 (Hakemsiz Dergi)

Çelik ve Polipropilen liflerin geleneksel ve yüksek dayanımlı betonlarda kırılma ve çatlak gelişimine etkisi

HÜSEM M., DEMİR S.
E-Journal of New World Sciences Academy , sa.8, ss.182-191, 2013 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Effect of accidental joint eccentricity on the performance of concentric steel braces

Sannah N., Demir S., Soalih H.
3RD INTERNATIONAL CIVIL ENGINEERING & ARCHITECTURE CONFERENCE , Trabzon, Türkiye, 12 - 14 Ekim 2023, cilt.1, sa.1, ss.1380-1390

Temperlenmiş Martensitik Çelik Kaynaklı Bağlantıların Mekanik Özelliklerine Tek Taraflı ve Çift Taraflı Kaynağın Etkisi

ÇUVALCI H., UZUNALİ U. Y., ATMACA B., DEMİR S.
Kaynak Teknolojisi XI. Ulusal Kongre ve Sergisi, Ankara, Türkiye, 15 - 16 Kasım 2019, cilt.-

A REPAIR METHOD FOR BUCKLED STEEL BRACES

DEMİR S.
8th INTERNATIONAL STEEL STRUCTURES SYMPOSIUM, Konya, Türkiye, 24 - 26 Ekim 2019, cilt.1, ss.431-439

A NEW PASSIVE ENERGY DISSIPATION DEVICE FOR EARTHQUAKE PROTECTION OF STRUCTURES

DEMİR S., HÜSEM M.
5th International Conference on Earthquake Engineering and Seismology, Ankara, Türkiye, 8 - 11 Ekim 2019, cilt.-

Geleneksel Çelik Çaprazların Onarımı

DEMİR S.
7. Yapı Mekaniği Laboratuvarları Çalıştayı, Konya, Türkiye, 4 - 05 Ekim 2019, cilt.-

CYCLIC BEHAVIOR OF THE TUBULAR BRACE INFILLED WITH A POLYMER ENCASED STEEL TUBE

DEMİR S.
VI. INTERNATIONAL EARTHQUAKE SYMPOSIUM, Kocaeli, Türkiye, 25 - 27 Eylül 2019, cilt.-

Determination of Mechanical Properties for Welded Steel Joints

UZUNALİ U. Y., ÇUVALCI H., ATMACA B., DEMİR S.
3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, cilt.-

Kaya Kütlesi Poisson Oranı ve Elastisite Modulü Değerlerinin Tünel Etrafındaki Plastik Zon Sınırları üzerinde Etkileri

Kömürlü E., DEMİR S.
Maden Mühendisliği Sempozyumu, Trabzon, Türkiye, 01 Mart 2019, cilt.-, ss.7

Metalik Sönümleyicili Çelik Çapraz Sistemi

DEMİR S., HÜSEM M.
Ulusal Yapı Mekaniği Laboratuvarları 6. Toplantısı, Trabzon, Türkiye, 17 - 18 Kasım 2017

Strengthening of Steel Frames with Steel Wire Ropes

DEMİR S., HÜSEM M., SESLİ H., COŞĞUN S. İ.
4th ICEES-International Earthquake Engineering and Seismology Conference, Eskişehir, Türkiye, 11 - 14 Ekim 2017, ss.1-9

Behavior of the Reinforced Concrete Coupled Wall Systems And Wall Boundary Elements

SESLİ H., COŞĞUN S. İ., HÜSEM M., DEMİR S.
ADVANCES IN CIVIL ENGINEERING, İstanbul, Türkiye, 21 - 23 Eylül 2016, cilt.1, sa.1, ss.1-8 Creative Commons License

NUMERICAL INVESTIGATION OF STEEL TUBULAR K-JOINT UNDER IMPACT LOADING

COŞĞUN S. İ., HÜSEM M., DEMİR S., SESLİ H.
ADVANCES IN CIVIL ENGINEERING, İstanbul, Türkiye, 21 - 23 Eylül 2016, cilt.1, sa.1, ss.1-8

A Numerical Study on Deformation Measurement of Rock Materials Using Electrical Resistance Strain Gauges: Investigation of Adhesive Type and Thickness Effect

Kömürlü E., CİHANGİR F., Kesimal A., Demir S.
Proceedings of the 24th International Mining Congress of Turkey, Antalya, Türkiye, 14 - 17 Nisan 2015, ss.407-412

Finite Element Analysis of RC Beams Include Bond Slip Effect

DEMİR S., HÜSEM M.
Proc. of the Intl. Conf. on Advances In Civil, Structural And Construction Engineering, Roma, İtalya, 7 - 08 Mayıs 2014, ss.43-47

The Experimental Investigation of Crack Mechanism in High Strength Concrete with Steel and Polypropylene Fiber

HÜSEM M., DEMİR S.
Proc. of the Intl. Conf. on Advances In Civil, Structural And Construction Engineering, Roma, İtalya, 7 - 08 Mayıs 2014, ss.38-42

Mevcut Betonarme Yapılarda Kısa Kolon Davranışlarının İyileştirilmesi

Demir S., HÜSEM M., Altın S., PUL S., Bikçe M., Emsen E.
2. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, Hatay, Türkiye, 25 - 27 Eylül 2013, cilt.1, sa.1, ss.1-10

Soğuk Şekillendirilmiş Hafif Profillerle Üretilen Endüstriyel Çerçeve Sistemlerin Optimizasyonu

Öztürk F., PUL S., HÜSEM M., Demir S.
Ulusal Yapı Mekaniği Laboratuvarları 4. Toplantısı, Trabzon, Türkiye, 3 - 04 Mayıs 2013, cilt.1, sa.1, ss.1-2

Metrikler

Yayın

51

Atıf (WoS)

161

H-İndeks (WoS)

8

Atıf (Scopus)

200

H-İndeks (Scopus)

8

Proje

4

Fikri Mülkiyet

2

Tez Danışmanlığı

3

Açık Erişim

11
BM Sürdürülebilir Kalkınma Amaçları