Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Improved form stability, thermal storage capacity and thermal conductivity of polyurethane based waste sponge carbon/expanded graphite/organic phase change materials coated by Ag nanoparticles

Wang S., Gu X., KAR T., SARI A., ÇAKIR E., VAROL T., et al.
Sustainable Materials and Technologies , cilt.43, 2025 (SCI-Expanded) identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 3
see details

The effect of high SiC ratio on the physical, mechanical, tribological and corrosion behavior of Al2024 alloy matrix composites fabricated by powder metallurgy

Beder M., VAROL T., AKÇAY S. B., ÇUVALCI H., ERDEMİR F., Khan M. A., et al.
JOURNAL OF COMPOSITE MATERIALS , 2025 (SCI-Expanded) identifier

Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation

ÇELEBİ M., GÜLER O., KARABACAK A. H., ÇANAKÇI A., AKÇAY S. B., KOCAMAN M., et al.
Tribology International , cilt.201, 2025 (SCI-Expanded) identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 3
  • Captures
    • Readers: 6
see details

Effect of expandable graphite content on the physical, thermal and mechanical properties of novolac matrix composites: Halogen-free flame-retardant polymer composites

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T.
DIAMOND AND RELATED MATERIALS , cilt.150, 2024 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 2
see details

The Effect of Heat Treatment on the Mechanical Properties and Oxidation Resistance of AlSi10Mg Alloy

Beder M., Akçay S. B., Varol T., Çuvalcı H.
Arabian Journal for Science and Engineering , cilt.49, sa.11, ss.15335-15346, 2024 (SCI-Expanded) Creative Commons License identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 5
  • Captures
    • Readers: 9
see details

Enhancingmechanicalpropertiesand tribologicalperformancethroughboroncarbidehybridizationin Novolacmatrixgraphitecompositesunderdry slidingcondition

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T.
TRIBOLOGY INTERNATIONAL , cilt.199, 2024 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 2
  • Captures
    • Readers: 3
see details

Impact of high Al<sub>2</sub>O<sub>3</sub> content on the microstructure, mechanical properties, and wear behavior Al-Cu-Mg/Al<sub>2</sub>O<sub>3</sub> composites prepared by mechanical milling

Beder M., Varol T., Akçay S. B.
CERAMICS INTERNATIONAL , cilt.50, sa.20, ss.38610-38631, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Synthesize and characterization of silver coated Ti powders from waste titanium chips by mechanical milling assisted electroless plating method

Akçay S. B., Varol T., Güler O., Alver Ü.
Materials Chemistry and Physics , cilt.323, 2024 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 3
see details

Effect of the Ag coated ABS granules and hot-pressing temperature on the microstructure evolution and properties of novel Ag/ABS composites

Akçay S. B., Kocaman M., Güler O., Ömür F. D., Varol T., Aslan M., et al.
Surfaces and Interfaces , cilt.51, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 2
  • Captures
    • Readers: 1
see details

Prediction of effect of fabrication parameters on the properties of B4C ceramic particle reinforced AA2024 matrix nanocomposites using neural networks

Varol T., Çanakçı A., Özşahin Ş., Beder M., Akçay S. B.
MATERIALS TODAY COMMUNICATIONS , cilt.39, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 3
  • Captures
    • Readers: 11
see details

Fabrication of mechanical durable novolac matrix composites with recycled and cost-effective candle-soot nano particles

Kocaman M., Güler O., Çuvalcı H., Akçay S. B.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , 2024 (SCI-Expanded) identifier identifier

Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys

Varol T., Aksa H. C., Yıldız F., Akçay S. B., Kaya G., Beder M.
Tribology International , cilt.192, 2024 (SCI-Expanded) identifier identifier

Pre-hardening water quenching effect on the wear resistance of TiCN coated 4140 steels

YALÇIN E. D., GÜLER O., KARABACAK A. H., ÇANAKÇI A., VAROL T., KOCAMAN M., et al.
SURFACE & COATINGS TECHNOLOGY , cilt.480, 2024 (SCI-Expanded) identifier identifier

Surface modification for improving interfacial, mechanical and thermal performance characteristics in epoxy composites: Electroless nickel enhancement of dendritic copper particle-reinforced epoxy

Akçay S. B., Kocaman M., Çelebi M., Güler O., Varol T.
Surface and Coatings Technology , cilt.478, 2024 (SCI-Expanded) identifier identifier

Evolution of Morphology, Particle Size and Oxidation Resistance of Recycled Ti-6Al-4V Powders Prepared by Planetary Ball Milling

VAROL T., Ömür F. D., AKÇAY S. B., GÜLER O., ERDEMİR F.
Arabian Journal for Science and Engineering , 2024 (SCI-Expanded) identifier identifier

The effect of recycled zinc powder content on the properties of novel novolac matrix hybrid composites

Kocaman M., Akçay S. B., Güler O., Çuvalcı H., Varol T., Çuvalcı O.
TRIBOLOGY INTERNATIONAL , cilt.188, 2023 (SCI-Expanded) identifier identifier

Effect of ball mill time and wet pre-milling on the fabrication of Ti powders by recycling Ti machining chips by planetary milling

Çuvalcı O., Varol T., Akçay S. B., Güler O., Çanakçı A.
POWDER TECHNOLOGY , cilt.426, 2023 (SCI-Expanded) identifier identifier

Structure and tribological properties of composites based on a Novolac matrix with Ni-P electrolytic coating

Güler O., Kocaman M., Akçay S. B., Çuvalcı H., Varol T.
SURFACE & COATINGS TECHNOLOGY , cilt.451, 2022 (SCI-Expanded) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 11
  • Captures
    • Readers: 15
see details

The evolution of microstructure and properties of Cu-Cr alloys synthesized via flake powder metallurgy assisted by mechanical alloying and hot pressing

VAROL T., GÜLER O., AKÇAY S. B., ÇOLAK H.
MATERIALS TODAY COMMUNICATIONS , cilt.33, 2022 (SCI-Expanded) identifier identifier

Effects of fabrication parameters and post-processing treatments on the mechanical and tribological behavior of surface-enhanced copper based materials by selective laser melting

Aksa H. C., Hacısalihoğlu İ., Yıldız F., VAROL T., GÜLER O., Kaya G., et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.304, 2022 (SCI-Expanded) identifier identifier

Enhancement of electrical and thermal conductivity of low-cost novel Cu–Ag alloys prepared by hot-pressing and electroless plating from recycled electrolytic copper powders

VAROL T., GÜLER O., AKÇAY S. B., Çuvalcı O.
Materials Chemistry and Physics , cilt.281, 2022 (SCI-Expanded) identifier identifier

Novel advanced copper-silver materials produced from recycled dendritic copper powders using electroless coating and hot pressing

Varol T., Güler O., Akçay S. B., Aksa H. C.
Powder Metallurgy , cilt.65, sa.5, ss.390-402, 2022 (SCI-Expanded) identifier identifier

The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores

VAROL T., Hacısalihoğlu İ., Kaya G., GÜLER O., Yıldız F., Aksa H. C., et al.
Journal of Materials Engineering and Performance , cilt.30, sa.7, ss.5216-5226, 2021 (SCI-Expanded) identifier identifier

The effect of silver coated copper particle content on the properties of novel Cu-Ag alloys prepared by hot pressing method

VAROL T., GÜLER O., Akcay S. B., Aksa H. C.
Powder Technology , cilt.384, ss.236-246, 2021 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

The Effect of Milling Time and Hot-Pressing on the Structural Properties and Wear Behavior of CoCrFeMnNi High-Entropy Alloys Fabricated by Mechanical Alloying

Bulut C., Yıldız F., Varol T., Akçay S. B., Ergüder T. O.
High Temperature Corrosion of Materials , cilt.101, sa.2, ss.225-249, 2024 (Scopus) identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Citations
    • Citation Indexes: 3
  • Captures
    • Readers: 6
see details

Aşınma ve Korozyona Dirençli Çelik Yüzeyler Oluşturmak Için Kullanılan Yüzey İşlemleri Üzerine Bir Derleme

Yıldız U. T., Varol T., Pürçek G., Akçay S. B.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.27, sa.1, 2024 (ESCI) Sürdürülebilir Kalkınma identifier identifier
Plum Print visual indicator of research metrics
PlumX Metrics
  • Captures
    • Readers: 6
see details

Electrodeposition of hard chromium on the interior surface of infantry rifle barrels: an experimental investigation

Yıldız U. T., VAROL T., AKÇAY S. B., PÜRÇEK G.
The International Journal of Materials and Engineering Technology , cilt.6, sa.2, ss.66-69, 2023 (Hakemli Dergi)

Yüksek Al2O3 Oranları ile Takviye Edilmiş Al-Cu-Mg Alaşımlarının Sıcak Pres Yöntemi ile Üretimi

AKÇAY S. B., VAROL T., AKSA H. C., GÜLER O.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, sa.1, ss.111-124, 2023 (Hakemli Dergi) identifier

Sıcak Presleme Yöntemi ile Üretilen Cu-Cr Alaşımlarının Sertlik ve Elektriksel İletkenlik Özellikleri Üzerine Mekanik Alaşımlama Süresinin Etkisi

Çolak H., Akçay S. B., Varol T., Güler O., Aksa H. C.
Karaelmas Fen ve Mühendislik Dergisi , cilt.12, sa.1, ss.47-58, 2022 (Hakemli Dergi) identifier

Effect of Boron Carbide Reinforcement Amount on the Properties of Boron Carbide Reinforced Al Based Composites Bor Karbür Takviyeli Al Esaslı Kompozitlerin Özellikleri Üzerine Bor Karbür Takviye Miktarının Etkisi

AKÇAY S. B., VAROL T., GÜLER O., Aksa H. C.
El-Cezeri Journal of Science and Engineering , cilt.9, sa.2, ss.869-881, 2022 (Scopus) identifier

Al2024/SiC Kompozitlerin Yüksek SiC Takviyesi ile Üretimi ve Karakterizasyonu

Akçay S. B., Varol T., Aksa H. C., Güler O.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.22, sa.2, ss.353-365, 2022 (Hakemli Dergi) identifier

Akımsız kaplama yöntemi ile Cu-Ag bimetal parçacıkların üretimi ve karakterizasyonu

Varol T., Akçay S. B., Güler O.
Gümüşhane Üniversitesi Fen Bilimleri Dergisi , cilt.11, sa.2, 2021 (Hakemli Dergi) identifier
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

EFFECT OF Al2O3 FILLER CONTENT ON MECHANICAL PROPERTIES OF NOVOLAC MATRIX COMPOSITES

KOCAMAN M., ÇUVALCI H., AKÇAY S. B., VAROL T.
5. International Congress on KHAZAR Scientific Research and Innovation, Türkistan, Kazakistan, 26 - 28 Aralık 2024, ss.336-342

SiC REINFORCEMENT EFFECT ON MECHANICAL PROPERTIES OF NOVOLAC COMPOSITES

KOCAMAN M., ÇUVALCI H., AKÇAY S. B., VAROL T.
9TH INTERNATIONAL AZERBAIJAN CONGRESS ON LIFE, ENGINEERING, MATHEMATICAL, AND APPLIED SCIENCES CONGRESS, Azerbaycan, 20 - 22 Aralık 2024, ss.717-725

DEVELOPMENT AND CHARACTERIZATION OF NI-P ELECTROLYTIC COATINGS DOPED WITH GRAPHITE/ALUMINA COMPOSITE POWDERS ON DENDRITIC COPPER-BASED MATERIALS

GÜLER O., AKÇAY S. B.
9TH INTERNATIONAL AZERBAIJAN CONGRESS ON LIFE, ENGINEERING, MATHEMATICAL, AND APPLIED SCIENCES CONGRESS, Azerbaycan, 20 - 22 Aralık 2024, ss.700-716

Effects of B4C Ratio on the Recycle-Based Productıon of Tıtanıum-Grade 4/B4C Composıte Powders by Wet Ball Milling

AKÇAY S. B., VAROL T., KOCAMAN M., Gedikaslan A.
3rd International Conference on Recent Academic Studies, 03 Aralık 2024, ss.690-697

Fabrication and Mechanical Characterization of Boron Carbide Reinforced Novolac Composites

KOCAMAN M., ÇUVALCI H., AKÇAY S. B., VAROL T.
3rd International Conference on Recent Academic Studies ICRAS 2024, Konya, Türkiye, 3 - 04 Aralık 2024, ss.768-773

EFFECTS OF B4C RATIO ON THE RECYCLE-BASED PRODUCTION OF TITANIUM-GRADE 4/B4C COMPOSITE POWDERS BY WET BALL MILLING

AKÇAY S. B., VAROL T., KOCAMAN M., Gedikaslan A.
3rd International Conference on Recent Academic Studies, Konya, Türkiye, 3 - 04 Aralık 2024, ss.690-697

Evaluation of Wear Behavior of Al2024 Alloy Produced via Powder Metallurgy Using the Taguchi Method

AKÇAY S. B., VAROL T., ERDEMİR F., KOCAMAN M.
Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Türkiye, 10 - 11 Kasım 2024, ss.232-239

Investigation of the effects of hot-pressing temperature on Ti-B4C composite materials produced with 10% B4C reinforcement

AKÇAY S. B., VAROL T., ÇUVALCI O., KOCAMAN M., Atik G.
Proceeding Book of 3rd International Conference on Contemporary Academic Research ICCAR 2024, Konya, Türkiye, 10 - 11 Kasım 2024, ss.240-246

THE EFFECT OF BALL MILLING SPEED ON THE PROPERTIES OF CO-CR-MO-W PARTICLES RECYCLED FROM SLM SUPPORT SCRAPS

Aksa H. C., Varol T., Akçay S. B.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, sa.2, ss.74

Investigation of the effects of Electrolytic Ni-P Coating on the Wear Properties of Glass Fiber and Graphite Reinforced Novolac Matrix Hybrid Composites

Akçay S. B., Kocaman M., Güler O., Varol T., Çuvalcı H.
2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 15 - 18 Ekim 2022, ss.1132-1136

EFFECT OF THE ELECTROLESS NI-P COATING ON THE PROPERTIES OF CU PARTICLES

AKÇAY S. B., GÜLER O., VAROL T.
3rd International Conference on Applied Engineering and Natural Sciences, Türkiye, 20 - 23 Temmuz 2022, ss.1447-1451

Effect of Ni-P Coating on The Microstructure of Copper-Based Materials Produced by Hot-Pressing

AKÇAY S. B., GÜLER O., VAROL T.
3rd International Conference on Applied Engineering and Natural Sciences, Türkiye, 20 - 23 Temmuz 2022, ss.1351-1354

EFFECT OF MECHANICAL MILLING TIME ON THE PROPERTIES OF COPPER-BASED MATERIALS

VAROL T., AKÇAY S. B., Çolak H.
International Scientific Research Congress Dedicated to the 30th Anniversary of Bakur Eurasia University, Azerbaycan, 27 Nisan 2022, ss.1549-1557

THE EFFECT OF GRAPHITE AMOUNT ON THE HARDNESS AND ELECTRICAL CONDUCTIVITY PROPERTIES OF COPPER-GRAPHITE COMPOSITES

VAROL T., AKÇAY S. B., Çolak H.
International Scientific Research Congress Dedicated to the 30th Anniversary of Bakur Eurasia University, Azerbaycan, 27 Nisan 2022, ss.1558-1565

Effect of Mechanical Milling and Electroless Silver Coating on the Oxidation Resistance of Copper Powder Produced by Electrolysis

Sevinç M., VAROL T., AKÇAY S. B., GÜLER O.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 Mayıs 2022, ss.2356-2360

The Effect of Electroless Coating and Ball Milling on the Properties of Cu/Ag Compact Materials

Başar E. Y., VAROL T., AKÇAY S. B., GÜLER O.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 Mayıs 2022, ss.2366-2370

The Effect of the Ball Milling Time on the Particle Size and Morphology of Dendritic Copper Particles

Uludağ A., VAROL T., AKÇAY S. B.
1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 Mayıs 2022, ss.2361-2365

Mechanical and Tribological Properties of SLMed Silver Coated Copper Powder Material

Kaya G., Güler O., Aksa H. C., Akçay S. B., Hacısalihoğlu İ., Varol T., et al.
1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021, ss.682-690

THE SYNTHESIS OF COPPER-CHROMIUM ALLOY PARTICLES BY MECHANICAL ALLOYING METHOD

Çolak H., Varol T., Güler O., Akçay S. B., Aksa H. C.
3rd INTERNATIONAL GOBEKLITEPE APPLIED SCIENCES CONGRESS, Şanlıurfa, Türkiye, 1 - 03 Ekim 2021

THE EFFECT OF HOT-PRESSING TEMPERATURE ON THE HARDNESS AND ELECTRICAL CONDUCTIVITY OF CU-AG LAYERED COMPACTS PRODUCED BY ELECTROLESS COATING AND POWDER METALLURGY

Varol T., Güler O., Akçay S. B.
INTERNATIONAL ASIAN CONGRESS ON CONTEMPORARY SCIENCES V, Nakhchivan, Azerbaycan, 1 - 02 Haziran 2021, ss.321-329

The Effect of pH on the Plating Layer of Silver Plated CopperPowders by Electroless Plating Method

VAROL T., AKÇAY S. B., GÜLER O., ALVER Ü.
5. International Conference on Material Science and Technology (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.60-64

The Effect of Reducing Agent Amount on the Properties ofElectroless Silver Plated Copper Powders

VAROL T., AKÇAY S. B., GÜLER O.
5. International Conference on Material Science and Technology (IMSTEC 2020), 16 - 18 Ekim 2020, ss.65-69

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

Güler O., Varol T., Alver Ü., Akçay S. B.
2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 Aralık 2019, ss.198-207

PRODUCTION OF CU-AG-CR COMPOSITES FROM THE LAYERED METALLICPOWDERS

Güler O., Varol T., Alver Ü., Akçay S. B.
2nd International May 19 Congress of Innovative Scientific Approaches - Applied Sciences, Samsun, Türkiye, 27 - 29 Aralık 2019, ss.190-197
Metrikler

Yayın

60

Atıf (WoS)

177

H-İndeks (WoS)

8

Atıf (Scopus)

203

H-İndeks (Scopus)

9

Atıf (Scholar)

208

H-İndeks (Scholar)

8

Atıf (TrDizin)

3

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

3

Proje

11

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları