Yayınlar & Eserler

Yayın Ağı
Makaleler 19
Tümü (19)
SCI-E, SSCI, AHCI (12)
SCI-E, SSCI, AHCI, ESCI (12)
Scopus (11)
TRDizin (2)
Diğer Yayınlar (6)

1. Unveiled stress dynamics: the role of post length and repair materials in perforated tooth models: a finite element analysis study

Uzun N. C., UŞUN A., ÇELİK D.
BMC ORAL HEALTH , cilt.25, sa.1, 2025 (SCI-Expanded) identifier identifier identifier

2. Synergistic Continuous and Short Fiber Reinforcement in Additively Manufactured Poly(Ether Ether Ketone) Composites

Uşun A., Kuleyin H., Gümrük R.
POLYMER COMPOSITES , cilt.1, ss.1-15, 2025 (SCI-Expanded)

3. Impact of Cell Design Parameters on Mechanical Properties of 3D-Printed Cores for Carbon Epoxy Sandwich Composites

ASLAN M., ÇAVA K., UŞUN A., GÜLER O.
Polymers , cilt.17, sa.1, 2025 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

4. Examine the mechanical properties of woven glass fiber fabric reinforced composite plate manufactured with vat-photopolymerization

Çava K., İpek H., Uşun A., Aslan M.
POLYMER COMPOSITES , cilt.45, sa.18, ss.17105-17120, 2024 (SCI-Expanded, Scopus) identifier identifier

5. Obtaining excellent mechanical properties with additively manufactured short fiber reinforced polyether-ether-ketone thermoplastics through simultaneous vacuum and infrared heating

GÜMRÜK R., VATANDAŞ B. B., UŞUN A.
ADDITIVE MANUFACTURING , cilt.94, 2024 (SCI-Expanded, Scopus) identifier identifier

6. Mechanical performances of continuous carbon fiber reinforced PEEK (polyether ether ketone) composites printed in a vacuum environment

Vatandaş B. B., UŞUN A., GÜMRÜK R.
Journal of Manufacturing Processes , cilt.120, ss.579-594, 2024 (SCI-Expanded, Scopus) identifier identifier

7. Enhanced mechanical properties of continuous carbon fiber reinforced polyether-ether-ketone composites via infrared preheating and high fiber volume fraction

Uşun A., Vatandaş B. B., Gümrük R.
ADDITIVE MANUFACTURING , cilt.89, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

8. Improvement of the Working Volume and the Applications of Retractors Used in Surgical Operations

Cinel A., Ipek H., Uşun A., Çava K., Aslan M.
Farabi Tıp Dergisi , cilt.3, sa.1, ss.14-23, 2024 (Hakemli Dergi)

9. The Relationship Between Fiber Bundle Size and Mechanical Performance of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic Composites

Vatandas B. B., UŞUN A., Guemruek R., Simsek C.
3D PRINTING AND ADDITIVE MANUFACTURING , cilt.10, sa.6, ss.1190-1203, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

10. Effect of Plastic Deformation on the Mechanical Properties of Dual-Phase Steels Using Nanoindentation

Ekmekcı D., Uşun A., Cora Ö. N.
JOM , cilt.75, sa.7, ss.2246-2255, 2023 (SCI-Expanded) identifier identifier

11. Additive manufacturing of PEEK-based continuous fiber reinforced thermoplastic composites with high mechanical properties

Vatandas B. B., UŞUN A., Yildiz N., Simsek C., CORA Ö. N., ASLAN M., et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.167, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

12. Examination of the influence of printing parameters for the continuous carbon fiber-reinforced thermoplastics based on fused deposition modeling

Uşun A., Gümrük R., Yıldız N., Vatandaş B. B.
The International Journal of Materials and Engineering Technology , cilt.5, sa.2, ss.65-70, 2022 (Hakemli Dergi)

13. Obtaining High Mechanical Properties Polyamide - Continuous Carbon Fiber Reinforced Thermoplastic Composites with Infrared Heating

NERGÜN M., ÖNEL N., VATANDAŞ B. B., UŞUN A., GÜMRÜK R.
Avrupa Bilim ve Teknoloji Dergisi , ss.222-226, 2022 (Hakemli Dergi)

14. The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties

Vatandaş B. B., Gümrük R., Uşun A., Yıldız N.
Open Journal of Nano , cilt.7, sa.1, ss.10-17, 2022 (Hakemli Dergi)

15. Investigating the effects of hot isostatic pressure heat treatment on mechanical properties of PLA based BCC lattices

Kuleyin H., Uşun A., Gümrük R.
Selcuk University Journal of Engineering Sciences , cilt.21, sa.01, ss.15-19, 2022 (Hakemli Dergi) Creative Commons License

16. The mechanical performance of the 3D printed composites produced with continuous carbon fiber reinforced filaments obtained via melt impregnation

UŞUN A., GÜMRÜK R.
ADDITIVE MANUFACTURING , cilt.46, 2021 (SCI-Expanded) identifier identifier

17. Seçici Lazer Ergitme Yöntemi ile Üretilen Mikro Kafes Yapıların Yüzeyinde Meydana Gelen Kusurların Mekanik Özelliklere Etkilerinin İncelenmesi

Uşun A., Gümrük R.
Journal of Investigations on Engineering and Technology , cilt.3, sa.2, ss.58-67, 2020 (Hakemli Dergi)

18. Investigation of mechanical properties of electroless nickel plated micro-lattice structures

Gümrük R., Uşun A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.35, sa.4, ss.1783-1798, 2020 (SCI-Expanded) identifier identifier

19. Enhancement of the Mechanical Performance of Stainless Steel Micro Lattice Structures Using Electroless Plated Nickel Coatings

Gümrük R., Uşun A., Mines R.
PROCEEDINGS (MDPI) , cilt.2, sa.8, ss.494, 2018 (Hakemsiz Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 27

1. BT Tabanlı Tasarım Ve Metal Katmanlı İmalat Kullanılarak Sağ Mandibula Rekonstrüksiyonu için Kişiselleştirilmiş Gonial İmplant

Aksa H. C., Uşun A., Çava K., İpek H., Aslan M.
Ulusal İleri Malzemeler ve Eklemeli İmalat Teknolojileri Konferansı, Sivas, Türkiye, 22 - 24 Ekim 2025, ss.1, (Tam Metin Bildiri)

2. DİJİTAL IŞIK İŞLEME (DLP) YÖNTEMİYLE ÜRETİLEN FARKLI KATMAN NUMARALARINA SAHİP 0/90 YÖNLENDİRMELİ CAM ELYAF TAKVİYELİ KOMPOZİT YÜZEY LEVHALARININ MEKANİK ÖZELLİKLERİNİN KARŞILAŞTIRMALI İNCELENMESİ

Uslu U., Çava K., Uşun A., İpek H., Gümrük R., Aslan M.
6th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM AND WORKSHOPS, İzmir, Türkiye, 2 - 04 Ekim 2025, ss.1, (Tam Metin Bildiri)

3. Design and Production of a Reusable Ergonomic Video Laryngoscop

Hacıalioğlu Ş., Çava K., Başer O., İpek H., Küçük A. O., Uşun A., et al.
4. SİVAS ULUSLARARASI BİLİMSEL ARAŞTIRMALAR VE İNOVASYON KONGRESİ, Sivas, Türkiye, 30 - 31 Mayıs 2025, ss.1-11, (Tam Metin Bildiri)

4. COMPRESSION BEHAVIOR OF DIGITAL LIGHT PROCESSING PRINTED SANDWICH PANEL CORES

Çava K., Uşun A., İpek H., Aslan M., Hacıalioğlu Ş.
Additive Manufacturing Conference, Antalya, Türkiye, 28 - 30 Nisan 2025, ss.118, (Özet Bildiri)

5. The Effect of Printing Pattern on Mechanical Performance of Polymer Parts Produced by Additive Manufacturing and Development of Analysis Method

Pir N., Özbek F., Uzunoğlu M. H., Uşun A., Gümrük R., Şen İ.
LIFT UP Sanayi Odaklı Lisans Bitirme Projeleri Programı 2023-2024, Ankara, Türkiye, 15 Temmuz 2024, ss.356-360, (Tam Metin Bildiri)

6. Production of a Personalized Orbital Reconstruction Prosthesis from Ct Images Using the Powder Bed Fusion Process Method

Uşun A., Aksa H. C., Çava K., Varol T., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

7. A Novel Ultra-Lightweight Lattice Manufacturing Method with Continuous Carbon Fiber Reinforced PEEK

Gümrük R., Kuleyin H., Uşun A., Çamtekne A. H., Kebap F., İncehasan İ.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

8. Examination of 3D Printing Pattern's Wear Performance in Glass Fiber-reinforced Polyamide (GFRPA)

İpek H., Çava K., Uşun A.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri)

9. A Research on the Recyclability of Abs Thermoplastic Material and its Reusability in 3D Printers

Çava K., Dudak G. Ç., Uşun A., Aslan M.
8th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 6 - 08 Eylül 2024, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

10. DEVELOPMENT OF A METHOD FOR THE EFFECT AND ANALYSIS OF PRINTING PATTERN ON MECHANICAL PERFORMANCE IN POLYMER PARTS PRODUCED BY ADDITIVE MANUFACTURING

Pir N., Özbek F., Uzunoğlu M. H., Gümrük R., Uşun A.
13. Uluslararası İstanbul Bilimsel Araştırmalar Kongresi , İstanbul, Türkiye, 1 - 03 Ekim 2024, ss.679-693, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

11. PRODUCTION OF A PERSONALIZED MANDIBLE PROSTHESIS FROM CT IMAGES USING THE POWDER BED FUSION PROCESS METHOD

Aksa H. C., Çava K., Uşun A., İpek H., Aslan M.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, ss.27, (Özet Bildiri)

12. INVESTIGATION OF THE COMPRESSION BEHAVIOR OF THE ADDITIVELY MANUFACTURED GLASS-FIBER REINFORCED COMPOSITES VIA VAT-PHOTOPOLYMERIZATION

Çava K., İpek H., Uşun A., Aksa H. C., Aslan M.
7th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2023, İstanbul, Türkiye, 25 - 27 Ekim 2023, ss.26, (Özet Bildiri)

13. The Effect of Printing Parameters on Mechanical Properties In Pla Materials Produced By FDM Method

Çamtekne A. H., Vatandaş B. B., Uşun A., Gümrük R.
4th Baskent International Conference On Multidisciplinary Studies, Ankara, Türkiye, 4 - 06 Ağustos 2023, ss.1-10, (Tam Metin Bildiri)

14. Design of an Apparatus for Measuring Capillary Refill Time

Aksa H. C., Küçük A. O., Toygar U., Uşun A., Çava K., Hacıalioğlu Ş.
4th Baskent International Conference On Multidisciplinary Studies, Ankara, Türkiye, 4 - 06 Ağustos 2023, ss.1-7, (Tam Metin Bildiri)

15. Cabinet Design For Additive Manufacturing Under Vacuum Effect With FDM-Type Printers

Vatandaş B. B., Uşun A., Gümrük R.
6. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 25 Şubat - 26 Mart 2023, ss.216-222, (Tam Metin Bildiri) Creative Commons License

16. Improving the Mechanical Properties of Continuous Fiber Reinforced Thermoplastic Composites Manufactured by FDM Method with Fiber Ratio Optimization

Uşun A., Vatandaş B. B., Gümrük R.
6. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 25 Şubat - 26 Mart 2023, ss.223-231, (Tam Metin Bildiri) Creative Commons License

17. Investigating The Reflective Performance of Micro Cellular Foam Based High-Performance Diffusive Reflectors

Gümrük R., Uşun A., Kuleyin H.
3. INTERNATIONAL DİCLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Türkiye, 26 - 27 Kasım 2022, ss.1672-1682, (Tam Metin Bildiri)

18. Effect of printing speed on mechanical properties of continuous fiber reinforced thermoplastic composites

Vatandaş B. B., Uşun A., Gümrük R.
3. INTERNATIONAL DİCLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Türkiye, 26 - 27 Kasım 2022, ss.1552-1561, (Tam Metin Bildiri)

19. The Effect of Peek Polymer and Carbon Fiber Interface Interaction on the Mechanical Behavior of Additively Manufactured Continuous Fiber Reinforced Composites

Vatandaş B. B., Uşun A., Gümrük R.
4. INTERNATIONAL GÖBEKLİTEPE SCIENTIFIC RESEARCH CONGRESS, Şanlıurfa, Türkiye, 7 - 08 Ekim 2022, ss.1043-1050, (Tam Metin Bildiri)

20. Obtaining High Mechanical Properties Polyamide - Continuous Carbon Fiber Reinforced Thermoplastic Composites with Infrared Heating

Nergün M., Önel N., Vatandaş B. B., Uşun A., Gümrük R.
1 ST INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED NATURAL SCIENCES , Konya, Türkiye, 10 - 13 Mayıs 2022, ss.2096, (Özet Bildiri)

21. Mechanical Properties of Additively Manufactured Hybrid Layered Continuous Carbon Fiber Reinforced Composites

Uşun A., Gümrük R.
5th International Webinar on Materials Science & Engineering, South Carolina, Amerika Birleşik Devletleri, 4 - 05 Nisan 2022, (Yayınlanmadı)

22. Improving the Interlaminar Bonding Performance of Additively Manufactured Continuous Fiber Reinforced Thermoplastic Composites Using an Infrared Heat Source

Uşun A., Vatandaş B. B., Gümrük R.
2.ND INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING AND NATURAL SCIENCES, Konya, Türkiye, 10 - 13 Mart 2022, ss.462-466, (Tam Metin Bildiri) Creative Commons License

23. Investigating of the Effects of Hot Isostatic Pressure Heat Treatment on Mechanical Properties of PLA Based BCC Lattices

Kuleyin H., Uşun A., Gümrük R.
5th International Conference on Engineering Technologies in Konya/TURKEY (ICENTE 2021), Konya, Türkiye, 18 - 21 Kasım 2021, ss.154, (Tam Metin Bildiri)

24. The Effect of Heat Treatments Applied to Continuous Fiber Reinforced Thermoplastic Composites on Mechanical Properties

Vatandaş B. B., Gümrük R., Uşun A., Yıldız N.
5th International Conference on Engineering Technologies (ICENTE 2021), Konya, Türkiye, 18 - 21 Kasım 2021, ss.154, (Tam Metin Bildiri)

25. Examination of the Influence of Printing Parameters for the Continuous Carbon Fiber-Reinforced Thermoplastics Based on Fused Deposition Modeling

Uşun A., Gümrük R., Yıldız N., Vatandaş B. B.
The 3rd International Conference of Materials and Engineering Technology (TICMET21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.257, (Özet Bildiri)

26. Additive Manufacturing of Continuous Fiber-Reinforced Composites with High Mechanical Properties From PLA Thermoplastic Resin by Fused Deposition Method

Gümrük R., Uşun A.
TICMET'20, Gaziantep, Türkiye, 5 - 07 Kasım 2020, ss.196-203, (Tam Metin Bildiri)

27. Enhancement of the mechanical performance of stainless steel micro lattice structures using electroless plated nickel coatings

Gümrük R., Uşun A., Mines R.
The Eighteenth International Conference of Experimental Mechanics, Brussels, Belçika, 1 - 05 Temmuz 2018, ss.494-499, (Tam Metin Bildiri)
Kitaplar 4

1. EXAMINATION OF 3D PRINTING PATTERN'S WEAR PERFORMANCE IN GLASS FIBER REINFORCED POLYAMIDE (GFRPA)

İpek H., Çava K., Uşun A.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

2. PRODUCTION OF A PERSONALIZED ORBITAL RECONSTRUCTION PROSTHESIS FROM CT IMAGES USING THE POWDER BED FUSION PROCESS METHOD

Uşun A., Aksa H. C., Çava K., Varol T., Aslan M.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

3. A RESEARCH ON THE RECYCLABILITY OF ABS THERMOPLASTIC MATERIAL AND ITS REUSABILITY IN 3D PRINTERS

Çava K., Dudak G. Ç., Uşun A., Aslan M.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025

4. A NOVEL ULTRA-LIGHTWEIGHT LATTICE MANUFACTURING METHOD WITH CONTINUOUS CARBON FIBER REINFORCED PEEK

Gümrük R., Kuleyin H., Uşun A., Çamtekne A. H., Kebap F., İncehasan İ.
Digitalization in Additive Manufacturing, Numan M. Durakbasa,Kerim Cetinkaya,Pinar Demircioglu,Ismail Bogrekci, Editör, Springer Nature, Zug, ss.1, 2025
Metrikler

Yayın

50

Yayın (WoS)

12

Yayın (Scopus)

11

Atıf (WoS)

223

H-İndeks (WoS)

5

Atıf (Scopus)

256

H-İndeks (Scopus)

6

Atıf (Scholar)

203

H-İndeks (Scholar)

6

Proje

23

Fikri Mülkiyet

11

Açık Erişim

3
BM Sürdürülebilir Kalkınma Amaçları