Prof. Dr. BURAK MARKAL

APPLIED THERMAL ENGINEERING , cilt.263, 2025 (SCI-Expanded)

Investigation of flow boiling phenomenon in micro-pin-fin heat sinks adapted to actively direction-changing moving systems

MARKAL B., KARABACAK Y. E., EVCİMEN A.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.159, 2024 (SCI-Expanded)

Effect of intermittent interruption of fluid supply on flow boiling phenomenon in micro-pinned heat sinks

Markal B., Evcimen A.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.159, 2024 (SCI-Expanded)

Machine-learning-based modeling of saturated flow boiling in pin-fin micro heat sinks with expanding flow passages

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.158, 2024 (SCI-Expanded)

Investigation of heat transfer limits for flow boiling in expanding heat sinks having micro pin fins

MARKAL B., EVCİMEN A., ATCI F., AYDIN O.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.156, 2024 (SCI-Expanded)

An experimental study on the performance of PCM-based heat sink with air for thermal regulation of PVs

YAĞCI O. K., AVCI M., AYDIN O., MARKAL B.

SOLAR ENERGY , cilt.278, 2024 (SCI-Expanded)

Transient behavior of flow boiling in structured microchannels under sudden and highly variable heat loads

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.154, 2024 (SCI-Expanded)

Effect of inlet temperature on flow boiling behavior of expanding micro-pin-fin type heat sinks

Markal B., Evcimen A., Aydın O.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.149, 2023 (SCI-Expanded)

Comparative investigation of different types of expanding micro-pin-fin heat sinks at low mass flux

Markal B., Kul B., Aydın O.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.148, 2023 (SCI-Expanded)

Effect of a new type staggered pin fin configuration on flow boiling characteristics of micro-heat sinks

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.45, sa.10, 2023 (SCI-Expanded)

Influence of downstream cross-sectional area ratio on flow boiling characteristics of expanding micro pin fin heat sinks

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.143, 2023 (SCI-Expanded)

Experimental investigation and a new predictive tool for thermal performance of pulsating heat pipes

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.45, sa.1, 2023 (SCI-Expanded)

Effect of gradually expanding flow passages on flow boiling of micro pin fin heat sinks

Markal B., Kul B., Avcı M., Varol R.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.197, 2022 (SCI-Expanded)

Combined influence of artificial nucleation site and expanding cross section on flow boiling performance of micro pin fins

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.135, 2022 (SCI-Expanded)

Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes

MARKAL B., Candere A., AVCI M., AYDIN O.

International Communications in Heat and Mass Transfer , cilt.127, 2021 (SCI-Expanded)

Investigation of the effects of miscible and immiscible binary fluids on thermal performance of pulsating heat pipes

HEAT AND MASS TRANSFER , cilt.57, sa.9, ss.1527-1542, 2021 (SCI-Expanded)

Investigation of flat plate type pulsating heat pipes via flow visualization-assisted experiments: Effect of cross sectional ratio

MARKAL B., Candere A., AVCI M., AYDIN O.

International Communications in Heat and Mass Transfer , cilt.125, 2021 (SCI-Expanded)

The combined effects of filling ratio and inclination angle on thermal performance of a closed loop pulsating heat pipe

Markal B., Aksoy K.

HEAT AND MASS TRANSFER , cilt.57, sa.5, ss.751-763, 2021 (SCI-Expanded)

Experimental investigation and force analysis of flat-plate type pulsating heat pipes having ternary mixtures

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.121, 2021 (SCI-Expanded)

Conical coaxial impinging air jets: angle effect on the heat transfer performance

MARKAL B., AVCI M., AYDIN O.

HEAT AND MASS TRANSFER , cilt.56, sa.12, ss.3135-3146, 2020 (SCI-Expanded)

Thermal investigation and flow pattern analysis of a closed-loop pulsating heat pipe with binary mixtures

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.42, sa.10, 2020 (SCI-Expanded)

Flow boiling characteristics in a novel minichannel with a step on each corner

Markal B., Candan A., Aydın O.

EXPERIMENTAL HEAT TRANSFER , cilt.33, sa.1, ss.1-17, 2020 (SCI-Expanded)

Prediction of Two-Phase Heat Transfer Coefficient of Flow Boiling in Minichannels

MARKAL B., Candan A., AYDIN O., Avcı M.

HEAT TRANSFER ENGINEERING , cilt.41, sa.1, ss.17-35, 2020 (SCI-Expanded)

The effect of Total flowrate on the cooling performance of swirling coaxial impinging jets

Markal B.

HEAT AND MASS TRANSFER , cilt.55, sa.11, ss.3275-3288, 2019 (SCI-Expanded)

Effect of hydraulic diameter on flow boiling in rectangular microchannels

HEAT AND MASS TRANSFER , cilt.55, sa.4, ss.1033-1044, 2019 (SCI-Expanded)

Prediction of Pressure Drop for Flow Boiling in Rectangular Multi-Microchannel Heat Sinks

HEAT TRANSFER ENGINEERING , cilt.40, ss.26-38, 2019 (SCI-Expanded)

Experimental investigation of flow boiling in single minichannels with low mass velocities

Markal B., Candan A., AYDIN O., Avci M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.98, ss.22-30, 2018 (SCI-Expanded)

Experimental investigation of heat transfer characteristics and wall pressure distribution of swirling coaxial confined impinging air jets

Markal B.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.124, ss.517-532, 2018 (SCI-Expanded)

Experimental investigation of coaxial impinging air jets

Markal B., AYDIN O.

APPLIED THERMAL ENGINEERING , cilt.141, ss.1120-1130, 2018 (SCI-Expanded)

EXPERIMENTAL STUDY OF SINGLE-PHASE FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS IN RECTANGULAR MICROCHANNELS

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.38, sa.1, ss.65-72, 2018 (SCI-Expanded)

Saturated flow boiling characteristics in single rectangular minichannels: effect of aspect ratio

Candan A., MARKAL B., AYDIN O., Avci M.

EXPERIMENTAL HEAT TRANSFER , cilt.31, sa.6, ss.531-551, 2018 (SCI-Expanded)

Prediction of Heat Transfer Coefficient in Saturated Flow Boiling Heat Transfer in Parallel Rectangular Microchannel Heat Sinks: An Experimental Study

HEAT TRANSFER ENGINEERING , cilt.38, sa.16, ss.1415-1428, 2017 (SCI-Expanded)

An experimental investigation of saturated flow boiling heat transfer and pressure drop in square microchannels

Korkmaz M. E., GÜMÜŞEL L., MARKAL B.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.65, ss.1-11, 2016 (SCI-Expanded)

Effect of aspect ratio on saturated flow boiling in microchannels

MARKAL B., AYDIN O., Avci M.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.93, ss.130-143, 2016 (SCI-Expanded)

An experimental study on the decaying swirl flow in a tube

AYDIN O., Avci M., MARKAL B., YAZICI M.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.55, ss.22-28, 2014 (SCI-Expanded)

Using artificial neural network for predicting performance of the Ranque-Hilsch vortex tube

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , cilt.35, sa.6, ss.1690-1696, 2012 (SCI-Expanded)

Exergy analysis of a counter-flow Ranque-Hilsch vortex tube having different helical vortex generators

MARKAL B., AYDIN O., Avci M.

INTERNATIONAL JOURNAL OF EXERGY , cilt.10, sa.2, ss.228-238, 2012 (SCI-Expanded) Sürdürülebilir Kalkınma

A new vortex generator geometry for a counter-flow Ranque-Hilsch vortex tube

AYDIN O., MARKAL B., Avci M.

APPLIED THERMAL ENGINEERING , cilt.30, sa.16, ss.2505-2511, 2010 (SCI-Expanded)

An experimental study on the effect of the valve angle of counter-flow Ranque-Hilsch vortex tubes on thermal energy separation

MARKAL B., AYDIN O., Avci M.

EXPERIMENTAL THERMAL AND FLUID SCIENCE , cilt.34, sa.7, ss.966-971, 2010 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Thermo-Fluidic Analysis of Pulsating Heat Pipes Charged with Water-Based Immiscible Fluid Pairs

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.12, sa.1, ss.63-80, 2024 (Hakemli Dergi)

MİKRO PİM TİPİ KANATÇIKLI VE MİKRO OYUKLU ISI ALICIDA DOYMUŞ KAYNAMALI AKIŞIN DENEYSEL İNCELENMESİ

Konya mühendislik bilimleri dergisi (Online) , cilt.11, sa.1, ss.103-123, 2023 (Hakemli Dergi)

Düşük Dolum Oranında İkili Karışımlarla Yüklü Üniform Olmayan Atımlı Isı Borusunun Deneysel İncelenmesi

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.9, sa.4, ss.1086-1100, 2021 (Hakemli Dergi)

Dönmeli Eş Eksenli Çarpan Jetlerde Isı Transferinin Deneysel İncelenmesi

MARKAL B., AYDIN O.

Tesisat Mühendisliği , cilt.2020, sa.175, ss.39-45, 2020 (Hakemli Dergi)

Dönmeli Eş-Eksenli Hava Jetinin Isıl Davranışının Yakın Çarpma Mesafeleri için Deneysel Olarak İncelenmesi

Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , cilt.12, sa.2, ss.443-453, 2020 (Hakemli Dergi)

Kare Kesitli Mikrokanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

MARKAL B., AYDIN O., AVCI M.

Mühendis ve Makina , cilt.60, sa.694, ss.50-66, 2019 (Hakemli Dergi)

Çarpan Eş Eksenli Bir Hava Jetinde Debi Oranının Akış Karakteristikleri Üzerine Etkisinin Deneysel Olarak İncelenmesi

Gümüşhane Üniversitesi Fen Bilimleri Dergisi , cilt.8, sa.2, ss.239-248, 2018 (Hakemli Dergi)

Minikanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

CANDAN A., MARKAL B., AYDIN O., AVCI M.

Tesisat Mühendisliği , sa.164, ss.29-38, 2018 (Hakemli Dergi)

Kare Kesitli Mikrokanallarda Doymuş Kaynamalı Akış Karakteristiklerinin Deneysel İncelenmesi

MARKAL B., AYDIN O., AVCI M.

Tesisat Mühendisliği , cilt.0, sa.164, ss.19-28, 2018 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

THE ROLE OF SURFACE WETTABILITY FOR FLOW BOILING IN MICROCHANNELS

ATCI F., MARKAL B.

4. International World Energy Conference, Kayseri, Türkiye, 6 - 08 Aralık 2024, ss.868-878, (Tam Metin Bildiri)

EFFECT OF REFRIGERANT TYPES ON FLOW BOILING IN MICROCHANNELS

ÖKSÜZ Ö., MARKAL B.

4. International World Energy Conference, Kayseri, Türkiye, 6 - 08 Aralık 2024, ss.858-867, (Tam Metin Bildiri)

CORRELATIONS DEVELOPED FOR MICROCHANNEL FLOW BOILING

EVCİMEN A., MARKAL B.

4. International World Energy Conference, Kayseri, Türkiye, 6 - 08 Aralık 2024, ss.886-896, (Tam Metin Bildiri)

Flow Boiling Characteristics in Expanding Type Structured Heat Sinks for Different Roles of Gravitational Force

11th International Conference on Heat Transfer and Fluid Flow (HTFF 2024)., Barcelona, İspanya, 22 - 24 Ağustos 2024, (Tam Metin Bildiri)

AN INVESTIGATION FOR NUMERICAL MODELS REGARDING FLOW BOILING IN MICROCHANNELS

EVCİMEN A., MARKAL B.

6. INTERNATIONAL MEDITERRANEAN CONGRESS, Roma, İtalya, 13 - 15 Ağustos 2024, cilt.1, ss.346-355, (Tam Metin Bildiri)

EFFECTIVENESS ANALYSIS OF MINI-CHANNELED SHELL-AND-TUBE HEAT EXCHANGER

Yiğit M. K., Evcimen A., Markal B.

3rd International World Energy Conference, Kayseri, Türkiye, 4 - 05 Aralık 2023, ss.241-247, (Tam Metin Bildiri)

INVESTIGATION OF BUBBLE BEHAVIOR IN MICROCHANNEL HEAT SINKS

Evcimen A., Markal B.

AKDENIZ 10TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.73-84, (Tam Metin Bildiri)

EFFECT OF INCLINATION ANGLE ON FLOW BOILING IN MICRO-SIZED CHANNELS

Markal B., Evcimen A.

14th International Conference on Thermal Engineering: Theory and Applications, Yalova, Türkiye, 25 - 27 Mayıs 2023, ss.1-3, (Özet Bildiri)

FOTOVOLTAİK PANELLERİN FAZ DEĞİŞTİREN MADDE DESTEKLİ ISI ALICISIYLA SOĞUTULMASI

YAĞCI O. K., AVCI M., AYDIN O., MARKAL B.

15. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ, İzmir, Türkiye, 26 - 29 Nisan 2023, ss.1502-1516, (Tam Metin Bildiri)

TRANSIENT BEHAVIOR OF NON-UNIFORM PULSATING HEAT PIPES UNDER DIFFERENT HEAT LOADS

International Symposium on Convective Heat and Mass Transfer (CONV-22), İzmir, Türkiye, 5 - 10 Haziran 2022, ss.579-587, (Tam Metin Bildiri)

DOLUM ORANININ ÜNİFORM OLMAYAN KESİTE SAHİP ATIMLI ISI BORUSUNUN ÇALIŞMA PERFORMANSI ÜZERİNDEKİ ETKİSİ

CANDAN CANDERE A., MARKAL B., AVCI M., AYDIN O.

ULIBTK’21 Uluslararası Katılımlı 23. Isı Bilimi ve Tekniği Kongresi, Gaziantep, Türkiye, 8 - 10 Eylül 2021, cilt.2, ss.1797-1805, (Tam Metin Bildiri)

A Promising Cooling Device for Electronics in Vehicles: Pulsating Heat Pipes

INTERNATIONAL SYMPOSIUM ON AUTOMOTIVE SCIENCE AND TECHNOLOGY (ISASTECH 2021), Ankara, Türkiye, 8 - 10 Eylül 2021, cilt.2, ss.1-8, (Tam Metin Bildiri)

EXPERIMENTAL INVESTIGATION OF THE PULSATING HEAT PIPES HAVING LARGER FLOW SECTIONS IN THE EVAPORATOR REGION

CANDAN CANDERE A., MARKAL B., AYDIN O., AVCI M.

5th International Anatolian Energy Symposium (AES 2021), Trabzon, Türkiye, 24 - 25 Mart 2021, ss.630-636, (Tam Metin Bildiri)

A REVIEW OF THE EFFECTS OF MICRO FIN GEOMETRY AND ALIGNMENT ON FLOW BOILING CHARACTERISTICS IN MICROCHANNEL HEAT SINKS

MARKAL B., KUL B.

5th International Anatolian Energy Symposium (AES 2021), Trabzon, Türkiye, 24 - 25 Mart 2021, ss.92-101, (Tam Metin Bildiri)

Effect of Filling Ratio on Thermal Performance of a Non-uniform Pulsating Heat Pipe

International Conference on Energy, Environment and Storage of Energy (ICEESEN 2020), Kayseri, Türkiye, 19 - 21 Kasım 2020, ss.206-213, (Tam Metin Bildiri)

Effect of Mixing Ratio of Binary Mixtures on Heat Transfer Characteristics of a Pulsating Heat Pipe

International 2nd Conference on Sustainable Energy and Energy Calculations (ICSEEC2020), İstanbul, Türkiye, 4 - 05 Eylül 2020, ss.53-62, (Tam Metin Bildiri)

HEAT TRANSFER BEHAVIOR OF COAXIAL IMPINGING JETS: ANEXPERIMENTAL STUDY

MARKAL B., AYDIN O.

22nd Congress on Thermal Science and Technology, Kocaeli, Türkiye, 11 - 14 Eylül 2019, (Tam Metin Bildiri)

Konutlarda Yağmur Suyu Potansiyelinden Faydalanma

VAROL R., MARKAL B.

4th INTERNATIONAL ENERGY ENGINEERING CONGRESS 2019 (UEMK 2019), Gaziantep, Türkiye, 24 - 25 Ekim 2019, ss.1109-1117, (Tam Metin Bildiri)

A FLOW DYNAMIC INVESTIGATION OF JET IMPINGEMENT WITHSWIRLING COAXIAL FORM

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.451-456, (Tam Metin Bildiri)

The Effect of Jet Impingement on the Performance of a Photovoltaic Module

3rd International Symposium on Innovative Approaches in Scientific Studies, Ankara, Türkiye, 19 - 21 Nisan 2019, ss.647-650, (Tam Metin Bildiri)

Dönmeli Eş Eksenli Çarpan Jetlerde Isı Transferinin Deneysel İncelenmesi

MARKAL B., AYDIN O.

14. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Türkiye, 17 - 20 Nisan 2019, ss.793-801, (Tam Metin Bildiri)

Thermal Characteristics of Swirling Coaxial Confined Impinging Air Jets: An Experimental Investigation

2nd International Symposium on Innovative Approaches in Scientific Studies, Samsun, Türkiye, 30 Kasım - 02 Aralık 2018, cilt.3, ss.66-71, (Tam Metin Bildiri)

Flow Characteristics of Swirling Coaxial Impinging Air Jets: An Experimental Investigation

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.782-795, (Tam Metin Bildiri)

EXPERIMENTAL INVESTIGATION OF THE EFFECT OF FILLING RATIO AND INCLINATION ANGLE ON THE HEAT PIPE PERFORMANCE

MARKAL B., AKSOY K.

III. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, Gaziantep, Türkiye, 21 - 22 Haziran 2018, cilt.1, ss.284-291, (Tam Metin Bildiri)

KESİTİ T-ŞEKLİNDE OLAN TEK BİR MİNİ KANALDA DOYMUŞ KAYNAMALI AKIŞ KARAKTERİSTİKLERİNİN DENEYSEL İNCELENMESİ

MARKAL B., CANDAN A., AYDIN O.

4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu (AES 2018), Edirne, Türkiye, 18 - 20 Nisan 2018, ss.561-572, (Tam Metin Bildiri)

Effects of Flowrate Ratio and Nozzle-to-plate Distance on the Hydrodynamic Characteristics of Impinging Coaxial Jets