Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of phase transformation related magnetic properties of Ti addition to FeCoCuNiMn and FeCoCuNiAl high entropy alloys by vacuum arc melting

İÇİN K.
Materials Today Communications , cilt.39, 2024 (SCI-Expanded) identifier

Investigating oxidation behavior of Fe38Co38Mo8B15Cu1 alloy ribbons – structural, magnetic and Mössbauer study

Sünbül S. E., Akyol S., İçin K., Umićević A., Ivanovski V., Batalović K.
JOURNAL OF NON-CRYSTALLINE SOLIDS , cilt.627, sa.122836, ss.122836, 2024 (SCI-Expanded) identifier

Microstructure and mechanical properties of a Ti6Al4V alloy recycled by waste chips vacuum arc melting

Özkan D. N., Şahin Ö., İçin K., Kılıçlı V., Akar N.
MATERIALPRUEFUNG/MATERIALS TESTING , cilt.66, sa.3, ss.1-11, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

The magnetic field sensing performance of FeCo-based soft magnetic alloys with varying Fe/Co ratio

Can H., İÇİN K., Akyol S., Topal U., ÖZTÜRK S., Sözeri H.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.966, 2023 (SCI-Expanded) identifier identifier

Wear, corrosion and oxidation characteristics of consolidated and laser remelted high entropy alloys manufactured via powder metallurgy

Kafali M., Döleker K. M., Erdogan A., SÜNBÜL S. E., İÇİN K., YILDIZ A., et al.
SURFACE & COATINGS TECHNOLOGY , cilt.467, 2023 (SCI-Expanded) identifier identifier

A comparative study of the correlation among the phase formation, crystal stability and magnetic properties of SrFe12-xMxO19 (M=Al3+, Cr3+and Mn3+, x=0-0.5) ferrite permanent magnets

İÇİN K., Akyol S., Alptekin F., YILDIZ A., SÜNBÜL S. E., ERGİN İ., et al.
JOURNAL OF SOLID STATE CHEMISTRY , cilt.324, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Mechanical, wear and corrosion behavior of Ti-6Al-xNb (x=3.5-21 wt%) alloys manufactured by powder metallurgy

GÖLBAŞI Z., ÖZTÜRK B., SÜNBÜL S. E., İÇİN K.
POWDER TECHNOLOGY , cilt.426, 2023 (SCI-Expanded) identifier identifier

A comparative study on the surface degradation mechanisms of arc melted and laser remelted CoCrFeNiAl0.5Nb0.5 HEA

İçin K., Sunbul S. E., Erdogan A., Doleker K. M.
SURFACE & COATINGS TECHNOLOGY , cilt.463, 2023 (SCI-Expanded) identifier identifier

Theoretical and experimental study of the titanium substituted Mg2-xTixNi alloys and Mg2-xTixNiH4 hydrides

SÜNBÜL S. E., İÇİN K., Mamula B. P., Radakovic J., ÖZTÜRK S., Batalovic K.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.48, sa.48, ss.18352-18365, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Effect of Co, Cu, and Mo alloying metals on electrochemical and magnetic properties of Fe-B alloy

SÜNBÜL S. E., Akyol S., Onal S., ÖZTÜRK S., Sozeri H., İÇİN K.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.947, 2023 (SCI-Expanded) identifier identifier

Effect of proton irradiation on the performance of fluxgate sensors

İÇİN K., Can H., Akyol S., Kiceci P. U., Topal U., oeztuerk S., et al.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.941, 2023 (SCI-Expanded) identifier identifier

Detailed studies on structural, morphological, optical, magnetic and mossbauer properties of Cu-substituted cobalt ferrite nanoparticles

ERGİN İ., İÇİN K., Gungunes H., ÖZÇELİK B.
PHYSICA SCRIPTA , cilt.98, sa.3, 2023 (SCI-Expanded) identifier identifier

Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations

Gunen A., Keddam M., SÜNBÜL S. E., İÇİN K., Doleker K. M., Gok M. S., et al.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.929, 2022 (SCI-Expanded) identifier identifier

Investigation of nano-crystaline strontium hexaferrite magnet powder from mill scale waste by the mechanochemical synthesis: Effect of the annealing temperature

İçin K., Öztürk S., Çakıl D. D., Sünbül S. E., Ergin İ., Özçelik B.
MATERIALS CHEMISTRY AND PHYSICS , cilt.290, 2022 (SCI-Expanded) identifier identifier

Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy

ÖZTÜRK S., Alptekin F., Onal S., SÜNBÜL S. E., ŞAHİN Ö., İÇİN K.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.903, 2022 (SCI-Expanded) identifier identifier

Effect of the Mn Amount on the Structural, Thermal, and Magnetic Properties of Rapidly Solidified (87-x)Cu-13Al-xMn (wt.%) Alloy Ribbons

SÜNBÜL S. E., İÇİN K., Eroglu M., ÖZTÜRK S.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.31, sa.4, ss.2761-2769, 2022 (SCI-Expanded) identifier identifier

Investigation and characterization of high purity and nano-sized SrCO3 production by mechanochemical synthesis process

İÇİN K., ÖZTÜRK S., SÜNBÜL S. E.
CERAMICS INTERNATIONAL , cilt.47, sa.23, ss.33897-33911, 2021 (SCI-Expanded) identifier identifier

Mechanochemical synthesis of SrFe12O19 from recycled mill scale: Effect of synthesis time on phase formation and magnetic properties

Icina K., Ozturka S., Cakila D. D., Sunbula S. E.
JOURNAL OF ALLOYS AND COMPOUNDS , cilt.873, 2021 (SCI-Expanded) identifier identifier

Microstructure, wear and oxidation behavior of AlCrFeNiX (X = Cu, Si, Co) high entropy alloys produced by powder metallurgy

Erdogan A., SÜNBÜL S. E., İÇİN K., Doleker K. M.
VACUUM , cilt.187, 2021 (SCI-Expanded) identifier identifier

Structural, optical, magnetic, photocatalytic activity and related biological effects of CoFe2O4 ferrite nanoparticles

Yalcin B., Ozcelik S., Icin K., Senturk K., ÖZÇELİK B., Arda L.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.32, sa.10, ss.13068-13080, 2021 (SCI-Expanded) identifier identifier

Determination of structural, tribological, isothermal oxidation and corrosion properties of Al?Co?Cr?Fe?Ni?Ti?Cu high-entropy alloy

SÜNBÜL S. E., İÇİN K., Seren F. Z., ŞAHİN Ö., ÇAKIL D. D., SEZER R., et al.
VACUUM , cilt.187, 2021 (SCI-Expanded) identifier identifier

Characterisation of nickel-aluminium bronze powders produced by the planar flow casting method

ÖZTÜRK S., SÜNBÜL S. E., Metoglu A., Onal S., İÇİN K.
MATERIALS SCIENCE AND TECHNOLOGY , cilt.36, sa.16, ss.1771-1784, 2020 (SCI-Expanded) identifier identifier

Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method

ÖZTÜRK S., SÜNBÜL S. E., Metoglu A., İÇİN K.
TRIBOLOGY INTERNATIONAL , cilt.151, 2020 (SCI-Expanded) identifier identifier

Structural and Hydrogen Storage Properties of Mg60-Ni40 and Mg80-Ni20 Alloys Prepared by Planar Flow Casting

SÜNBÜL S. E., ÖZTÜRK S., İÇİN K.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.29, sa.9, ss.6101-6107, 2020 (SCI-Expanded) identifier identifier

Effect of the stoichiometric ratio on phase evolution and magnetic properties of SrFe12O19 produced with mechanochemical process using mill scale

İçi̇n K., ÖZTÜRK S., ÇAKIL D. D., SÜNBÜL S. E.
CERAMICS INTERNATIONAL , cilt.46, sa.9, ss.14150-14160, 2020 (SCI-Expanded) identifier identifier

Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons

ÖZTÜRK S., SÜNBÜL S. E., İÇİN K.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.30, sa.5, ss.1169-1182, 2020 (SCI-Expanded) identifier identifier identifier

Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons

ÖZTÜRK S., İÇİN K., GENCTURK M., GÖBÜLÜK M., SVEC P.
JOURNAL OF NON-CRYSTALLINE SOLIDS , cilt.527, 2020 (SCI-Expanded) identifier identifier

Surface and structural characterization of amorphous Fe,Co-based melt-spun ribbons subjected to heat treatment processes

ÖZTÜRK S., İÇİN K., GENCTURK M., GÖBÜLÜK M., TOPAL U., SVEC P.
JOURNAL OF NON-CRYSTALLINE SOLIDS , cilt.522, 2019 (SCI-Expanded) identifier identifier

The Role of Wheel Surface Quality on Structural and Hard Magnetic Properties of Nd-Fe-B Permanent Magnet Powders

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Karaagac O., Kockar H.
JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.31, sa.9, ss.3025-3041, 2018 (SCI-Expanded) identifier identifier

Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique

ÖZTÜRK S., İÇİN K., ÖZTÜRK B., TOPAL U., Odabasi H. K., GÖBÜLÜK M., et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.10, ss.5017-5030, 2017 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Enhancing the Structural and Mechanical Properties of Ti-Zr Alloy through Boron Doping

İçin K., Sünbül S. E., Sezer R.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.14, sa.1, ss.412-421, 2024 (Hakemli Dergi)

Cantor Yüksek Entropili Alaşımına Mn Yerine Cu İkamesinin Yapısal ve Mekanik Özellikler Üzerindeki Etkisinin Araştırılması

İçin K., Sünbül S. E., Yıldız A.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.11, sa.2, ss.1-10, 2023 (Hakemli Dergi)

Mekanik Alaşımlanmış AlCuCrFeNi Yüksek Entropili Alaşımının Fiziksel Buhar Biriktirme Tekniği İle Kaplanabilirliğinin İncelenmesi

Şimşek Y. E., Döleker K. M., Kuru M., Sünbül S. E., İçin K.
Manufacturing Technologies and Applications , cilt.3, sa.2, ss.1-8, 2022 (Hakemli Dergi)

Production of AA 2024 Aluminum Alloy Ribbons by Melt Spinning Process

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.
Turkish Journal of Electromechanics & Energy , sa.2, ss.14-19, 2017 (Hakemli Dergi)

Effect of Chill Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.
International Journal of Materials Science and Applications , cilt.6, sa.5, ss.241-249, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The High Purity Nanosized Strontium Carbonate Production With The Ammonium Carbonate Media Via The Mechanochemical Synthesis Process

Öztürk S., Alptekin F., Akyol S., Sünbül S. E., İçin K.
The International Conference of Materials and Engineering Technology, Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.244

Structural Tribological Isothermal Oxidation And Corrosion Properties Of Al-Co-Cr-Fe-Ni-Ti-Cu High Entropy Alloy

Öztürk S., Akyol S., Alptekin F., İçin K., Sünbül S. E.
The 3rd International Conference of Materials and Engineering Technology, Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.245

Parçacık Boyutunun Stronsiyum Hekzaferrit Mıknatısların Manyetik Özellikler Üzerindeki Etkisi

ÇAKIL D. D., İÇİN K., ÖZTÜRK S.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Türkiye, ss.298

Nikelin Fe-Nd-B Esaslı Kalıcı Mıknatısların Özellikleri Üzerindeki Etkisi

ÖZTÜRK S., İÇİN K.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Türkiye, ss.389

Ti Katkılı NdFeB Kalıcı Mıknatıs Tozların Üretimi

ÖZTÜRK S., İÇİN K.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Türkiye, ss.394

Kimyasal Bileşimin SrM Sürekli Mıknatısların Manyetik Özellikleri Üzerindeki Etkisi

ALPTEKİN F., ÇAKIL D. D., Şahin Ö., SÜNBÜL S. E., İÇİN K., SEZER R.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Türkiye, ss.593

Kimyasal Bileşimin SrM Sürekli Mıknatısların Manyetik Özellikleri Üzerindeki Etkisi

ALPTEKİN F., ÇAKIL D. D., Şahin Ö., SÜNBÜL S. E., İÇİN K., SEZER R.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Türkiye, ss.593

Hitperm Tipi Alaşımlarda Değişen Yüzey Özelliklerinin Manyetik Özellikler Üzerindeki Etkisi

İÇİN K.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), Ankara, Türkiye, ss.312

Kimyasal Bileşimin SrM Sürekli Mıknatısların Manyetik Özellikleri Üzerindeki Etkisi

ALPTEKİN F., Çakıl D. D., ŞAHİN Ö., SÜNBÜL S. E., İÇİN K., SEZER R.
The International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019, 18 - 20 Ekim 2019, ss.593-596

Characterization of Hydrogen Storable Properties of Mg-Ni Alloy Ribbons Produced by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., BEYAZIT G., ÖZCAN Ş.
4th International Hydrogen Technologies Congress, Edirne, Türkiye, 20 - 23 Haziran 2019, ss.131-134

Investigation of Hydriding and Thermal Properties of Near Eutectic Mg-Ni Alloy Fabricated by Rapid Solidification Process

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., BEYAZIT G., ÖZCAN Ş.
4th International Hydrogen Technologies Congress, Edirne, Türkiye, 20 - 23 Haziran 2019, ss.164-167

Hydrogenation Behavior and Microstructure Evolution of Intermetallic Mg2Ni Alloy Produced by Vacuum Arc Melting

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., BEYAZIT G., ÖZCAN Ş.
4th International Hydrogen Technologies Congress, Edirne, Türkiye, 20 - 23 Haziran 2019, ss.172-175

SOĞUMA HIZININ Al-Ni BRONZU ŞERİTLERİN VE TOZLARIN YAPISAL VE MEKANİK ÖZELLİKLERİ ÜZERİNDEKİ ETKİSİ

ÖZTÜRK S., METOĞLU A., SÜNBÜL S. E., İCİN K.
3rd International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), Nevşehir, Türkiye, 17 - 19 Eylül 2018

MELT SPINNING YÖNTEMİYLE ÜRETİLEN CuAl10Ni5Fe4 ALAŞIM TOZLARININ YAPISAL İNCELENMESİ

ÖZTÜRK S., METOĞLU a., SÜNBÜL S. E., İCİN K.
3rd International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), Nevşehir, Türkiye, 17 - 19 Eylül 2018

The Influence of milling Media on Structural and Magnetic properties of Strontium Hexaferrite Powders

ÖZTÜRK S., ÇAKIL D. D., İCİN K., SEZER R., TOPAL U., ÖZTÜRK B.
6th International Conference on Superconductivity and Magnetisim, Antalya, Türkiye, 29 Nisan - 04 Mayıs 2018, cilt.6, sa.1, ss.482

Preparation of SrFe12O19 Powders with Mechanosynthesis method

ÖZTÜRK S., Çakıl D. D., İCİN K., SEZER R., Topal U., ÖZTÜRK B.
6th International Conference on Superconductivity and Magnetisim, 29 Nisan - 04 Mayıs 2018, sa.1, ss.422

Investigation of Hydriding Properties of Mg80-Ni20 Alloy Ribbons Produced by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., BEYAZIT G., ÖZCAN Ş.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.143

Production of Rapidly Solidified Mg Based Alloy Ribbons by Melt Spinning Method

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., BEYAZIT G., ÖZCAN Ş.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.142

Importance of Microstructure and Powder Size on The Magnetic Features of Nd15Fe77B8 Spherical Shaped Powder

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.112

Co Katkılı Nd15Fe76Co2B8 Manyetik Alaşımın Yapısal ve Fiziksel Özelliklerinin İncelenmesi

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, cilt.1, sa.1, ss.113-114

Mg60Ni40 ALLOY SYNTHESIS AND INVESTIGATION OF HYDROGEN STORAGE PROPERTIES

BAYAZİT G., SÜNBÜL S. E., ÖZTÜRK S., İCİN K., ÖZCAN Ş.
3rd International Hydrogen Technologies Congress (IHTEC2018), Antalya, Türkiye, 15 - 18 Mart 2018

Magnetic Behaviours of Dendritically Solidified Spherical NdFeB Powders and Surfactant-Active Ball Milled Particles

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U.
2nd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Ekim 2017, ss.1281-1293

Analytical Hierarchy Process in Material Selection

ÖZTÜRK B., İCİN K., Şahin Ö., GÖLBAŞI Z., ÖZTÜRK S.
2nd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Ekim 2017, ss.693-700

Effect of Deformation Rate on Electrical and Mechanical Properties of Pure Copper

ÖZTÜRK B., İCİN K., GÖLBAŞI Z., ÖZTÜRK S.
2nd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Ekim 2017, ss.917-923

MICROSTRUCTURAL INVESTIGATION OF RAPIDLY SOLIDIFIED Cu(100-x)Al13Mnx (x=1-14) RIBBONS

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17),, Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.187-192

THE EFFECT OF Mn AMOUNT ON THE SHAPE MEMORY PROPERTIES OF CuAlMn RIBBONS PRODUCED BY MELT SPINNING METHOD

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., İCİN K., ÖZTÜRK B.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.67-72

Melt Spinning Yöntemiyle CuAlMn Şeritlerin Üretimi ve Manyetik Özelliklerinin İncelenmesi

ÖZTÜRK S., EROĞLU M., SÜNBÜL S. E., GÖLBAŞI Z., İCİN K., ÖZTÜRK B.
2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017

Production Of AA2024 Aluminum Alloy Ribbons By Melt Spinning Process

Öztürk S., Sünbül S. E., Gölbaşı Z., İcin K., Öztürk B.
2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017

Effect of Wheel Cooling on Magnetic Propeties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN ODABAŞI H.
4th international conference on materials science and nanotechnology for next generation, Sarajevo, Bosna-Hersek, 28 - 30 Haziran 2017, ss.61

The Influence Of Solidification Rate On Hard Magnetic Properties Rare-Earth Permanent Magnetic Powder

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.
4Th International Conference On Materials Science And Nanotechnology For Next Generation, Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.62

Effect of Wheel Cooling on Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt Spinning Method

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.
4Th International Conference On Materials Science And Nanotechnology For Next Generation, Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.63

Hızlı Katılaştırılmış Nd Fe B Sert Manyetik Tozların Yapısal Termal Ve Manyetik Karakterizasyonu

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.
Internatıonal Energy & Engineering Conference, 13 Ekim 2016

Improvement Of Magnetic Propertıes Of Melt Spun Produced Nd2fe14b Particles During Surfactant Assisted Ball Milling

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., Kaftelen Odabaşı H.
International Energy & Engineering Conference, 13 - 14 Ekim 2016

STRUCTURAL THERMAL AND MAGNETİC CHARACTERIZATION OF RAPIDLY SOLIDIFIED Nd Fe B HARD MAGNETİC ALLOY POWDER

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN ODABAŞI H.
INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Türkiye, 13 - 14 Eylül 2016, ss.67-80

IMPROVEMENT OF MAGNETIC PROPERTIES OF MELT-SPUN PRODUCED Nd2Fe14B PARTICLES DURING SURFACTANT-ASSISTED BALL MILLING

ÖZTÜRK S., İCİN K., ÖZTÜRK B., Topal U., KAFTELEN H.
INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.220-227

HIZLI KATILAŞTIRILMIŞ Nd-Fe-B SERT MANYETİK TOZLARIN YAPISAL,TERMAL VE MANYETİK KARAKTERİZASYONU

ÖZTÜRK S., İCİN K., ÖZTÜRK B., TOPAL U., KAFTELEN H.
INTERNATIONAL ENERGY & ENGINEERING CONFERENCE, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.68-81

MELT SPİNNİNG METODUYLA AA6060 ALUMINYUM ALAŞIMI TOZ ÜRETİMİNİN İNCELENMESİ

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., EROĞLU M.
International Conference on Material Science and Technology, 6 - 08 Nisan 2016

MELT SPINNING YÖNTEMİYLE AA6060 ALÜMİNYUM ALAŞIMI ŞERİT ÜRETİMİ VE İNCELENMESİ

ÖZTÜRK S., SÜNBÜL S. E., İCİN K., ÖZTÜRK B., EROĞLU M.
International Conferance on Materials Science and Technology in Cappadocia, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.440-444

MELT SPİNNİNG YÖNTEMİYLE NdFeB MANYETİK TOZLARIN ÜRETİMİ VE KARAKTERİZASYONU

ÖZTÜRK S., İCİN K., KAFTELEN H., ÖZTÜRK B., TOPAL U., METOĞLU A.
International Conference on Material Science and Technology, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.428-433

PRODUCTION OF AA7075 ALUMINIUM ALLOY RIBBONS BY MELT SPINNING METHOD

ÖZTÜRK S., METOĞLU A., İCİN K., ÖZTÜRK B.
International Porous Powder Materials Symposiım and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.141-145

Investigation of Production of Rapidly Solidified 304 Stainless Steel Ribbons by Melt Spinning Method

ÖZTÜRK S., İCİN K., KAFTELEN H., ÖZTÜRK B., GÖBÜLÜK M.
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.62-63

Metrikler

Yayın

77

Atıf (WoS)

248

H-İndeks (WoS)

8

Atıf (Scopus)

285

H-İndeks (Scopus)

10

Proje

34

Açık Erişim

22
BM Sürdürülebilir Kalkınma Amaçları