SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Optimum tuning of a gyroscopic vibration absorber for vibration control of a vertical cantilever beam with tip mass
INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION, cilt.24, ss.210-216, 2019 (SCI Expanded İndekslerine Giren Dergi)
Performance of Pendulum Absorber for a Non-Linear System of Varying Orientation
JOURNAL OF SOUND AND VIBRATION, cilt.229, no.4, ss.913-933, 2000 (SCI İndekslerine Giren Dergi)
A Comparison of Fracture Mechanics and S-N Curve Approaches in Designing Drill Pipe
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME, cilt.114, ss.205-211, 1992 (SCI Expanded İndekslerine Giren Dergi)
Diğer Dergilerde Yayınlanan Makaleler
Experimental Investigation of a Gyroscopic Vibration Absorber For Vibration Control of a Vertical Cantilever Beam
International Journal of Automation, Mechatronics & Robotics, no.3, ss.40-44, 2016 (Diğer Kurumların Hakemli Dergileri)
Design of Quartz Chemical delivery Parts for High Temperature Vacuum Chambers Base of Simulation Results
INTERNATİONAL JOURNAL OF AUTOMOTİVE ENGİNEERİNG AND TECHNOLOGİES, cilt.4, no.1, ss.33-39, 2015 (Diğer Kurumların Hakemli Dergileri)
Design and Optimization of Chemical Mixing System for Vacuum Chambers Base of Simulation Results
INTERNATİONAL JOURNAL OF AUTOMOTİVE ENGİNEERİNG AND TECHNOLOGİES, cilt.4, no.4, ss.23-32, 2015 (Diğer Kurumların Hakemli Dergileri)
Finite Element Analysis of Nonlinear Coupled Oscillator
Journal of Engineering Structure, cilt.24, no.5, ss.577-586, 2002 (Diğer Kurumların Hakemli Dergileri)
Roadway Lighting Design Methodology and Evaluation
Journal of Integrated Design and Process Science, cilt.4, no.1, ss.1-23, 2000 (Diğer Kurumların Hakemli Dergileri)
Development of a Proper Drying Region for West Texas Climate
Journal of Integrated Design and Process Science, cilt.4, no.3, ss.78-86, 2000 (Diğer Kurumların Hakemli Dergileri)
Design and Development of a New Peanut Curing Process for West Texas
An international Journal of Drying Technology, cilt.17, no.6, ss.1149-1159, 1999 (Diğer Kurumların Hakemli Dergileri)
Sabit ve Dinamik Yük Altında Çalışan Boru Bağlantılarındaki Sürtünme Katsayısının Değişimi
TÜBİTAK-Türk Mühendislik ve Çevre Bilimleri Dergisi, cilt.22, ss.269-277, 1998 (Diğer Kurumların Hakemli Dergileri)
Experimental Investigation of Galling Resistance in OCTG Connections
Tran. ASME Journal of Engineering for Industry, cilt.114, no.1, ss.100-104, 1992 (Diğer Kurumların Hakemli Dergileri)
Radyal Pompalarda Dengeleme Deliklerinin Verime Etkisi
Journal of Isparta Engineering Faculty of Akdeniz University, cilt.Vol. 3, ss.1-9, 1987 (Hakemli Üniversite Dergisi)
Radyal Pompalarda Dengeleme Deliklerinin Verime Etkisi Effect of Radial Propeller Balance Holes on the Efficiency Experimental Study
Journal of Isparta Engineering Faculty of Akdeniz University, ss.1-9, 1987 (Diğer Kurumların Hakemli Dergileri)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
Dynamics of a Flexible Structure with Pendulum Studied at Various Angels between the Vertical and the Horizontal Positions
Seventh Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures, Amerika Birleşik Devletleri, cilt.1, ss.1
An Experimental Investigation of Nonlinear System in Autoparametric Region
SDPS, The Second World Conference on Integrated Design and Process Technology, Amerika Birleşik Devletleri, cilt.3, ss.391
Sarkac Acisinin 0-2p Araliginda Gercek Zamanli Deneysel Olcum Teknigi
1. Ulusal Deneysel Mekanik Sempozyumu, İstanbul, Türkiye, ss.173
Design and Optimization of Chemical Mixing System for Vacuum Chambers Base of Simulation Results
İnternational Conferance on Advenced Technology & Sciences (ICAT’14), Antalya, Türkiye, ss.152
Effect of Contact Geometry and Other Tribological Variables on the Friction Coefficient in Threaded Connections
ASME/ETCE Tribology Symposium, Amerika Birleşik Devletleri, cilt.61, ss.117
Theoretical Study on Coupled Beam-Pendulum Dynamic Vibration Absorber
ASME/ETCE Dynamics and Vibration Symposium, Amerika Birleşik Devletleri, cilt.63, ss.75
System Design and Construction of a Cadaver Section Display: Integrated Platform for Active Learning
SDPS, The Third World Conference on Integrated Design and Process Technology, Almanya, cilt.1, ss.150
Design and Development of a New Peanut Curing Process for West Texas
SDPS, The Third World Conference on Integrated Design and Process Technology, Almanya, cilt.5, ss.44
Surtunme Katsayisini Normal ve Zaman Bagimli Belirleyen Deney Duzenegi
1. Ulusal Deneysel Mekanik Sempozyumu, İstanbul, Türkiye, ss.268
Experimental Investigation of Galling Resistance in OCTG Connections
ASME, ETCE Offshore and Arctic Operations Symposium Proceedings, Amerika Birleşik Devletleri, cilt.29, ss.15
Design of Quartz Chemical delivery Parts for High Temperature Vacuum Chambers Base of Simulation Results
İnternational Conferance on Advenced Technology & Sciences (ICAT’14), Antalya, Türkiye, ss.159
Vibration Absorber for Flexible Structures: Experimental Study under Sinusoidal and Random Excitation
1997 International Mechanical Engineering Congress and Exposition, Active/Passive Vibration Control and Non-Linear dynamics and Structures, Amerika Birleşik Devletleri, cilt.95, ss.143
Roadway Lighting Contrast Calculations Using CCD Video Imaging Technology pp. 75 - 80, 1998.
SDPS, The Third World Conference on Integrated Design and Process Technology, Almanya, cilt.5, ss.80
Sarkacin Titresim Sondurucu Olarak Kullanilabilirliginin Deneysel Arastirilmasi
6. Ulusal Deneysel Mekanik Sempozyumu, Trabzon, Türkiye, cilt.2, ss.505
Linear Olmayan Fren-Tekerlek Sisteminin Periyodik Cozumleri
6. Ulusal Deneysel Mekanik Sempozyumu, Trabzon, Türkiye, cilt.2, ss.495
Use of Pendulum for Passive Structural Vibrations Control: An Experimental Study
14th ASME Biennial Conference on Mechanical Vibration and Noise, Amerika Birleşik Devletleri, cilt.56, ss.215
Design and Stress Analysis of a Center Spreader of an Aircraft Seat
SDPS, The Third World Conference on Integrated Design and Process Technology, Almanya, cilt.1, ss.325
Nonlinear Dynamic Inter Action of a Fluid Break disc System of an Airplane Landing Gear
Third Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures and Mechanisms, Amerika Birleşik Devletleri, ss.1
Design a Luminance, Illuminance Measurement and Video Images Recording system and Analysis
SDPS, The Third World Conference on Integrated Design and Process Technology, Almanya, cilt.5, ss.66
Investigation of Hybrid Composite Coating on ZA-27 Alloy Produced by MAO
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 Haziran 2019, ss.379-382
Microstructure Characteristic of Al2O3 Coatings Doped h-BN Particles Grown on ZA-27 Alloy
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.583-587
Investigation of Composite Coating Based on Al2O3 Doped Graphite Nanoparticles Formed on ZA-27 Alloy
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.578-582
Gyroscopic Inertial Truster (GIT)
9th International Automotive Technologies Congress, İstanbul, Türkiye, 13 - 15 Eylül 2018, ss.200-205
Gyroscopic Antigravity
INTERNATIONAL CONFERENCE ON MATHEMATICS AND ENGINEERING, 10 - 12 Mayıs 2017
Experimental Investigation of a Gyroscopic Vibration Absorber For Vibration Control of a Vertical Cantilever Beam
Proc. of the Fourth Intl. Conf. Advances in Civil, Structural and Mechanical Engineering- CSM 2016, Bermingam, İngiltere, 17 - 18 Mart 2016, ss.78-82
FEM Analysis of Nonlinear Coupled Oscillator
IMAC-XVIII: A Conference on Structural Dynamics, San Antonıo, Amerika Birleşik Devletleri, 2 Temmuz - 02 Ekim 2000, ss.1703-1709
Design a Reflectometer to Measure Pavement Reflection for Field Experiment
SDPS/IDPT Conferance, Dallas, Amerika Birleşik Devletleri, 6 Nisan - 06 Temmuz 2000, ss.1
Visibility Measurement Technique Using Photometric Images
I999 Annual ASEE Conference Proceeding, Session: 3659, San Antonıo, Amerika Birleşik Devletleri, 10 Şubat - 10 Nisan 1999, cilt.1, ss.1
Effect of Surface Coating and Tin Plating on Friction Characteristics of P-110 Tubing for Different Thread Compounds
ASME/ETCE'99 Conference, (Proceeding in CD) Tribology-ETCE, Huston, Amerika Birleşik Devletleri, 2 Ocak - 02 Mart 1999, cilt.1, ss.1-8
Sarkac Acisinin 0 2pi Araliginda Gercek Zamanli Deneysel Olcum Teknigi
1. Ulusal Deneysel Mekanik Sempozyumu, I.T.U., Türkiye, 28 - 30 Eylül 1994, ss.173-180
A Comparison of Fracture Mechanics and S-N Curve Approaches in Designing Drill Pipe
ASME ETCE Offshore and Arctic Operations Symposium Proceedings, Austin, Amerika Birleşik Devletleri, 2 - 06 Şubat 1989, cilt.26, ss.45-50
Kitap & Kitap Bölümleri
Tasarımda Geometrik Toleransların Kullanılması
Ktü Matbaası, Trabzon, 2019
TASARIMDA GEOMETRİK TOLERANSLARIN KULLANIMI
KTÜ Matbaası, Trabzon, 2019
Design of Quartz Chemical Delivery Parts for High Temperrature Vacuum Chambers Based on Simulation Results
Recent Studies in Engineering Computing, Chapter, Olkan Cuvalcı, Editör, TheATLAS, Lubbock, ss.45-56, 2017
Design and Optimization of Chemical Mixing Systm for Vacuum Chambers: Simulation Results
Recent Studies in Engineering Computing, Chapter, Olkan Cuvalcı, Editör, TheATLAS, Lubbock, ss.57-70, 2017
Kuruluşunun 60. Yılında Karadeniz Teknik Üniversitesinde Kurumsal Üniversite-Sanayi İş BirliğiTrabzon Teknoloji Geliştirme Bölgesi ve Kurumsal Üniversite-sanayi İlişkileri
Kuruluşunun 60 Yılında Karadeniz Teknik Üniversitesinde Kurumsal Üniversite Sanayi İş Birliği, Prof. Dr. Ersan BOCUTOĞLU ve Öğr. Gör. Ali Haydar DOĞU, Editör, Karadeniz Teknik Üniversitesi, Trabzon, ss.63-124, 2015
Karadeniz Teknik Üniversitesi 2014-2018 Stratejik Planı ve Kurumsal Üniversite-Sanayi İlişkileri
Kuruluşunun 60 Yılında Karadeniz Teknik Üniversitesinde Kurumsal Üniversite Sanayi İş Birliği, Ersan Bocutoğu, Ali Haydar Doğu, Editör, KTÜ, Trabzon, ss.125-146, 2015