Dr. Öğr. Üyesi HARUN YANAR

Yayın Ağı

Makaleler 34

1. Improving the fatigue limit of FSW6061 Al alloy welded joints by surface spinning rolling

Gong B., Zhang Z., Wang H., Liu R., Liu H., PÜRÇEK G., et al.

International Journal of Fatigue , cilt.200, 2025 (SCI-Expanded)

2. Effect of B4C Amount on Microstructural and Mechanical Properties of Cu/h-BN/B4C Metal Matrix Composites Fabricated via Spark Plasma Sintering

Çelebi M., Karabacak A. H., Özkaya S., Çelik E., Sekban D. M., Çanakçı A., et al.

METALS , cilt.15, sa.12, ss.1-15, 2025 (SCI-Expanded, Scopus)

3. A novel surface strengthening technique for enhancing fatigue properties of 6061 Al alloy

Gong B. S., Zhang Z. J., Wang H. W., Liu R., Liu H. Z., Wang H., et al.

INTERNATIONAL JOURNAL OF FATIGUE , cilt.198, 2025 (SCI-Expanded)

4. Effect of High-Entropy Alloy Amount on Microstructural and Mechanical Properties of Metal Matrix Composites Fabricated via Friction Stir Processing

SEKBAN D. M., ÖZKAYA S., YANAR H., KARABACAK A. H., AKTARER S. M., COŞKUN A.

Advanced Engineering Materials , cilt.27, sa.17, 2025 (SCI-Expanded)

5. Influence of multi directional forging-induced grain refinement and subsequent aging on tribological performance of Cu-Ni-Si-Cr alloys in electrical contact sliding conditions

YANAR H., COŞKUN A.

WEAR , cilt.574-575, 2025 (SCI-Expanded, Scopus)

6. Effect of Severe Plastic Deformation and Aging States on Microstructure and Mechanical Properties of 2024 Aluminum Alloy

Demirtas M., Yanar H., Uzun M., Ustalar M., Zhang Z., Dai R., et al.

Advanced Engineering Materials , cilt.27, sa.9, 2025 (SCI-Expanded)

7. Çok yönlü dövme ve yaşlandırma işlemlerinin Cu-Co-Be-Ni alaşımının darbe davranışına olan etkisinin incelenmesi

YANAR H.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.14, sa.2, ss.542-550, 2025 (Hakemli Dergi)

8. Surface Modification of Additively Manufactured Inconel 718 Alloy by Low-Energy High-Current Electron Beam Irradiation

Demirtas M., Ivanov K. V., PÜRÇEK G., YANAR H., KAYNAK Y.

Advanced Engineering Materials , cilt.26, sa.23, 2024 (SCI-Expanded)

9. Fatigue crack propagation anisotropy of an Al–Zn–Mg–Cu super-thick plate

Wang H., Zhang Z., Hou J., Gong B., Liu H., Abedi H., et al.

International Journal of Fatigue , cilt.187, 2024 (SCI-Expanded)

10. High-Cycle-Fatigue Anisotropy of an Aluminum Alloy Superthick Plate

Wang H., Zhang Z., Gong B., Zhou X., Liu R., Abedi H. R., et al.

Advanced Engineering Materials , cilt.26, sa.15, 2024 (SCI-Expanded)

11. Effects of aging state on the low-cycle fatigue properties of 2024 aluminum alloy

Gong B., Zhang Z., Hou J., Liu R., Duan Q., Wang H., et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T , cilt.29, ss.2448-2457, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

12. Investigation on the fatigue behavior of 7075 aluminum alloy at different aging states

Gong B., Zhang Z., Hou J., Li R., Liu R., Duan Q., et al.

INTERNATIONAL JOURNAL OF FATIGUE , cilt.175, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

13. Enhancing mechanical and tribological properties of Ni3Al-15vol%TiC composite by high current pulsed electron beam irradiation

DEMİRTAŞ M., Ivanov K., PÜRÇEK G., YANAR H.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.898, 2022 (SCI-Expanded)

14. Effect of hexagonal boron nitride (h-BN) addition on friction behavior of low-steel composite brake pad material for railway applications

YANAR H., PÜRÇEK G., Demirtas M., Ayar H. H.

TRIBOLOGY INTERNATIONAL , cilt.165, 2022 (SCI-Expanded)

15. The mechanical compression performance of ultra-fine grained stainless steel pyramidal lattice core

KULEYIN H., GÜMRÜK R., YANAR H., Demirtaş M., PÜRÇEK G.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.28, sa.10, ss.1073-1078, 2021 (SCI-Expanded)

16. Microstructural, mechanical and tribological properties of ultrafine-grained Cu-Cr-Zr alloy processed by high pressure torsion

Purcek G., Yanar H., Demirtas M., Shangina D. V., Bochvar N. R., Dobatkin S. V.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.816, 2020 (SCI-Expanded)

17. Effect of long-term natural aging on microstructure and room temperature superplastic behavior of UFG/FG Zn-Al alloys processed by ECAP

Demirtas M., Yanar H., Purcek G.

Letters on Materials , cilt.8, ss.532-537, 2018 (Scopus)

18. Effect of resin content on tribological behavior of brake pad composite material

YANAR H., Ayar H. H., DEMİRTAŞ M., PÜRÇEK G.

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.72, sa.2, ss.195-202, 2018 (SCI-Expanded)

19. High temperature superplasticity and deformation behavior of naturally aged Zn-Al alloys with different phase compositions

Demirtas M., Kawasaki M., Yanar H., Purcek G.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.730, ss.73-83, 2018 (SCI-Expanded)

20. Effect of grain refinement and phase composition on room temperature superplasticity and damping capacity of dual-phase Zn-Al alloys

DEMİRTAŞ M., ATLI K. C., YANAR H., Purce G.

JOURNAL OF MATERIALS RESEARCH , cilt.33, sa.8, ss.1032-1045, 2018 (SCI-Expanded)

21. Influence of high pressure torsion-induced grain refinement and subsequent aging on tribological properties of Cu-Cr-Zr alloy

PÜRÇEK G., YANAR H., Shangina D., Demirtas M., Bochvar N., Dobatkin S.

Journal of Alloys and Compounds , cilt.742, ss.325-333, 2018 (SCI-Expanded)

22. Enhancing the Damping Behavior of Dilute Zn-0.3Al Alloy by Equal Channel Angular Pressing

Demirtas M., Atli K. C., YANAR H., PÜRÇEK G.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.6, ss.2868-2876, 2017 (SCI-Expanded)

23. Improvement the wear behavior of low carbon steels by friction stir processing

SEKBAN D. M., AKTARER S. M., YANAR H., ALSARAN A., PÜRÇEK G.

IOP Conf. Series: Materials Science and Engineering , sa.174, 2017 (Hakemli Dergi)

24. Effect of friction stir processing on tribological properties of Al-Si alloys

AKTARER S. M., SEKBAN D. M., YANAR H., PÜRÇEK G.

IOP Conf. Series: Materials Science and Engineering , sa.174, 2017 (Hakemli Dergi)

25. Improvement of wear behaviour of titanium by boriding

Kara G., Pürçek G., Yanar H.

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.69, sa.1, ss.65-70, 2017 (SCI-Expanded)

26. Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy

Demirtas M., PÜRÇEK G., YANAR H., ZHANG Z. J., ZHANG Z. F.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.663, ss.775-783, 2016 (SCI-Expanded)

27. Influence of microalloying with zirconium on the structure and properties of Cu-Cr alloy after high pressure torsion

SHANGINA D. V., BOCHVAR N. R., GORSHENKOV M. V., YANAR H., PÜRÇEK G., DOBATKIN S. V.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.650, ss.63-66, 2016 (SCI-Expanded)

28. Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging

PÜRÇEK G., YANAR H., Demirtas M., ALEMDAĞ Y., SHANGINA D. V., DOBATKIN S. V.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.649, ss.114-122, 2016 (SCI-Expanded)

29. Effect of equal-channel angular pressing on room temperature superplasticity of quasi-single phase Zn-0.3Al alloy

Demirtas M., PÜRÇEK G., YANAR H., Zhang Z. J., Zhang Z. F.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.644, ss.17-24, 2015 (SCI-Expanded)

30. Effect of Chemical Composition and Grain Size on RT Superplasticity of Zn-Al alloys processed by ECAP

Demirtaş M., PÜRÇEK G., YANAR H., ZHANG Z. J., ZHANG Z. F.

Letters on materials , cilt.5, sa.3, ss.328-334, 2015 (ESCI)

31. Achieving room temperature superplasticity in Zn-5Al alloy at high strain rates by equal-channel angular extrusion

Demirtas M., PÜRÇEK G., YANAR H., ZHANG Z. J., Zhang Z. F.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.623, ss.213-218, 2015 (SCI-Expanded)

32. Improvement of high strain rate and room temperature superplasticity in Zn-22Al alloy by two-step equal-channel angular pressing

DEMIRTAS M., PÜRÇEK G., YANAR H., ZHANG Z. J., ZHANG Z. F.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.620, ss.233-240, 2015 (SCI-Expanded)

33. Effect of Chemical Composition and Grain Size on RT Superplasticity of Zn-Al alloys processed by ECAP

Demirtaş M., PÜRÇEK G., YANAR H., Zhang Z., Zhang Z.

Letters on Materials , cilt.1, ss.3, 2015 (ESCI)

34. Effect of precipitation on mechanical and wear properties of ultrafine-grained Cu-Cr-Zr alloy

PÜRÇEK G., YANAR H., Saray O., Kraman I., Maier H. J.

WEAR , cilt.311, ss.149-158, 2014 (SCI-Expanded)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 35

1. ÖN ISIL İŞLEM KOŞULLARININ Al6061 ALAŞIMININ SÜRTÜNME KARIŞTIRMA KAYNAK KABİLİYETİNE OLAN ETKİSİ

COŞKUN A., YANAR H., SEKBAN D. M.

3rd International Congress on Ship and Marine Technology, Trabzon, Türkiye, 10 - 12 Aralık 2024, cilt.1, ss.379-383, (Tam Metin Bildiri)

2. Effect of Cold-Spraying as Post-Processing Surface Treatment on Ti6Al4V Additive Manufactured Parts

Kolcu D., Meriç D., Aksa H. C., Yanar H., Varol T., Gedikli H., et al.

5th International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.986-993, (Tam Metin Bildiri)

3. Strengthening Al 2024 Alloy via Equal Channel Angular Pressing and Subsequent Aging

Demirtaş M., Yanar H., Uzun M., Ustalar M., Pürçek G.

The 5th International Conference of Materials and Engineering Technology (TICMET'23), Trabzon, Türkiye, 13 - 16 Kasım 2023, ss.419, (Özet Bildiri)

4. Effect of steel fiber addition on the mechanical and tribological behavior of the composite brake pad materials

Yanar H., Pürçek G., Ayar H.

14th International Conference on Tribology, ROTRIB 2019, Cluj-Napoca, Romanya, 19 - 21 Eylül 2019, cilt.724, (Tam Metin Bildiri)

5. Development Of A Multıfunctıonal Trıbometer: Desıgn Concept

PÜRÇEK G., YANAR H.

16th International Conference on Tribology (SERBIATRIB19), Kragujevac, Sırbistan Ve Karadağ, 15 - 17 Mayıs 2019, ss.1, (Tam Metin Bildiri)

6. Effect Of Cashew Nut Shell Lıquıd (CNSL) On Trıbologıcal Behavıor Of Brake Pad Composıte

YANAR H., AYAR H. H., PÜRÇEK G.

16th International Conference on Tribology (SERBIATRIB19), Kragujevac, Sırbistan Ve Karadağ, 15 - 17 Mayıs 2019, ss.1, (Tam Metin Bildiri)

7. Mechanical Properties of Multi-Directional Forged Al-7Si-4Zn-3Cu Alloy

ALEMDAĞ Y., KARABIYIK S., YANAR H., PÜRÇEK G.

13th International Conference on Superplasticity in Advanced Materials, (ICSAM 2018), St. Petersburg, Rusya, 19 Eylül - 22 Ağustos 2018, cilt.385, ss.250-255, (Tam Metin Bildiri)

8. Effect of Multi-Directional Forging on Tribological Properties of Al-7Si-4Zn-3Cu alloy

ALEMDAĞ Y., KARABIYIK S., YANAR H., PÜRÇEK G.

13th International Conference on Superplasticity in Advanced Materials, (ICSAM 2018), St. Petersburg, Rusya, 19 - 22 Ağustos 2018, ss.12, (Özet Bildiri)

9. Effect of Resin Content on Friction and Wear Behaviour of Non-Asbestos Composite Friction Material Used in Brake Pad

YANAR H., AYAR H. H., Demirtaş M., PÜRÇEK G.

2th International Conference On Tribology (Balkantrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.1, (Tam Metin Bildiri)

10. A New Multi-Functional Tribometer: Application of Block-on-Ring Test Module

YANAR H., Demirtaş M., PÜRÇEK G.

2th International Conference On Tribology (Turkeytrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.1, (Özet Bildiri)

11. Room temperature superplasticity in fine/ultrafine-grained Zn-Al alloys with different phase compositions

Demirtas M., YANAR H., Saray O., PÜRÇEK G.

13th International Conference on Superplasticity in Advanced Materials, ICSAM 2018, Petersburg, Rusya, 19 - 22 Ağustos 2018, ss.72-77, (Tam Metin Bildiri)

12. Superplastic-Like Behavior at Room Temperature inTwo-Step Rolled Zn-Al Alloys

DEMİRTAŞ M., YANAR H., PÜRÇEK G.

International Conference on Advanced EngineeringTechnologies (ICADET’17), 21 - 23 Eylül 2017, (Özet Bildiri)

13. Severe Plastic Deformation Induced Dynamic Precipitation in Cu-Cr-Zr Alloy

YANAR H., PÜRÇEK G., DEMİRTAŞ M., SHANGINA D., DOBATKIN S.

EUROMAT 2017,European Congress and Exhibition on Advanced Materials and Processes, 17 - 22 Eylül 2017, (Özet Bildiri)

14. Relationship between superplasticity and damping capacity in naturally aged Zn-Al alloys

DEMİRTAŞ M., ATLI K. C., YANAR H., PÜRÇEK G.

European Congress and Exhibitaion onAdvanced Materials and Processes (EUROMAT 2017), 17 - 22 Eylül 2017, (Özet Bildiri)

15. İki aşamalı hadde işlemine tabi tutulan Zn-Al alaşımlarında oda sıcaklığında süperplastisite-benzeri davranış

Demirtaş M., YANAR H., PÜRÇEK G.

International Conferance on Advances Engineering Technogies (ICADET), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1, (Tam Metin Bildiri)

16. Effect of Ultrafine-Grained Formation and Subsequent Aging on Structural, Mechanical and Tribological Properties of Cu-Cr-Zr Alloy

SHANGINA D. V., BOCHVAR N. R., PÜRÇEK G., YANAR H., DOBATKIN S. V.

European Congress and Exhibitaion on Advanced Materials and Processes (EUROMAT 2017), Thessaloniki, Yunanistan, 17 - 22 Eylül 2017, ss.1, (Tam Metin Bildiri)

17. Plastic Deformation Induced Dynamic Precipitation in Cu-Cr-Zr Alloy

YANAR H., PÜRÇEK G., DEMIRTAS M., SHANGINA D. V., DOBATKIN S. V.

European Congress and Exhibitaion on Advanced Materials and Processes (EUROMAT 2017), Thessaloniki, Yunanistan, 17 - 22 Eylül 2017, ss.1, (Tam Metin Bildiri)

18. Effect of Fiber Content on the Friction and Wear Performance of Non-asbestos Composites Used in Brake Pads

YANAR H., Demirtaş M., AYAR H. H., PÜRÇEK G.

9th International conference on tribology (Balkantrib17), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.59, (Özet Bildiri)

19. Effect of testing temperature on tribological properties of a Cu-Cr-Zr alloy in different microstructural conditions

YANAR H., SHANGINA D. V., Demirtaş M., PÜRÇEK G., DOBATKIN S. V.

9th International conference on tribology (Balkantrib17), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.40, (Özet Bildiri)

20. A new multifunctional tribometer with high temperature module

YANAR H., PÜRÇEK G., Demirtaş M.

9. International conference on tribology (BalkanTRib'17), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.65, (Özet Bildiri)

21. Superplastic behaviors of severely deformed and naturally aged Zn-Al alloys at room and elevated temperatures

Demirtaş M., Kawasaki M., YANAR H., PÜRÇEK G.

European Congress and Exhibitaion on Advanced Materials and Processes (EUROMAT 2017), Thessaloniki, Yunanistan, 12 - 17 Eylül 2017, ss.1, (Tam Metin Bildiri)