Arş. Gör. Dr. MÜSLİM ÇELEBİ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effect of mechanical milling time on powder characteristic, microstructure, and mechanical properties of AA2024/B4C/GNPs hybrid nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

POWDER TECHNOLOGY , cilt.449, 2025 (SCI-Expanded)

Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation

ÇELEBİ M., GÜLER O., KARABACAK A. H., ÇANAKÇI A., AKÇAY S. B., KOCAMAN M., et al.

Tribology International , cilt.201, 2025 (SCI-Expanded)

Effect of AlCrCuFeNi high entropy alloy reinforcements with and without B4C on powder characteristic, mechanical and wear properties of AA5083 metal-metal composites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., TUNÇ S. A., GÜLER O., ÇELEBİ M.

Journal of Alloys and Compounds , cilt.1008, 2024 (SCI-Expanded)

A Study on the Optimization of Nano-B4C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites

ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÖZKAYA S., Arpacı K. A.

Arabian Journal for Science and Engineering , cilt.49, sa.11, ss.14625-14641, 2024 (SCI-Expanded)

Determination of nano-graphene content for improved mechanical and tribological performance of Zn-based alloy matrix hybrid nanocomposites

ÇANAKÇI A., ÇELEBİ M.

Journal of Alloys and Compounds , cilt.1001, 2024 (SCI-Expanded)

Comparative analysis of wear properties between electroless Ni-B coating and commercial ZnAl coating on 38Si7 steel used in railway system

DURSUNLAR M., TAŞ Z., Akgül B., GÜLER O., ÇELEBİ M.

Engineering Science and Technology, an International Journal , cilt.58, 2024 (SCI-Expanded)

Pre-hardening water quenching effect on the wear resistance of TiCN coated 4140 steels

YALÇIN E. D., GÜLER O., KARABACAK A. H., ÇANAKÇI A., VAROL T., KOCAMAN M., et al.

SURFACE & COATINGS TECHNOLOGY , cilt.480, 2024 (SCI-Expanded)

Synthesis of hydroxyapatite matrix Ag and CNT particle reinforced hybrid biocomposites with improved mechanical and antibacterial properties

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., ÇANAKÇI S., CEYLAN E.

International Journal of Materials Research , cilt.115, sa.3, ss.190-201, 2024 (SCI-Expanded)

Surface modification for improving interfacial, mechanical and thermal performance characteristics in epoxy composites: Electroless nickel enhancement of dendritic copper particle-reinforced epoxy

Akçay S. B., Kocaman M., Çelebi M., Güler O., Varol T.

Surface and Coatings Technology , cilt.478, 2024 (SCI-Expanded)

Effect of different PCA types on morphology, physical, thermal and mechanical properties of AA2024-B4C composites

TUNÇ S. A., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M., Turkmen M.

POWDER TECHNOLOGY , cilt.434, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

A study on the improvement of wear and corrosion properties of ZA40/Graphene/B4C hybrid nanocomposites

Çelebi M., Çanakçı A., Güler O., Karabacak H., Akgül B., Özkaya S.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.966, 2023 (SCI-Expanded)

The effect of advanced electrodeposited Ni-P-Cu coatings obtained with scrap cu plates on the tribological performance of Al powder metallurgy products

Güler O., Çelebi M., Karabacak A. H., Çanakçı A.

SURFACE & COATINGS TECHNOLOGY , cilt.468, 2023 (SCI-Expanded)

Study on Effect of Milling Time on the Mechanical and Wear Properties of the ZA40-B4C-Graphene Hybrid Nanocomposites Fabricated by Vacuum Hot-Pressing

Çelebi M., Çanakçı A., Güler O., Akgül B., Karabacak A. H.

JOM , cilt.75, sa.9, ss.3935-3950, 2023 (SCI-Expanded)

Production of Al2024/h-BN nanocomposites with improved corrosion, wear and mechanical properties

Karabacak A. H., Çanakçı A., Çelebi M., Güler O., Tunç S. A., Arpacı K. A.

Materials Chemistry and Physics , cilt.300, 2023 (SCI-Expanded)

Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing

ÇELEBİ M., ÇANAKÇI A., GÜLER O., ÖZKAYA S., KARABACAK A. H., Arpaci K. A.

JOM , cilt.74, sa.11, ss.4449-4461, 2022 (SCI-Expanded)

Corrosion and Mechanical Properties of Novel AA2024 Matrix Hybrid Nanocomposites Reinforced with B4C and SiC Particles

KARABACAK A. H., ÇANAKÇI A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.

SILICON , cilt.14, sa.14, ss.8567-8579, 2022 (SCI-Expanded)

The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al2O3-Gr hybrid nanocomposites produced by powder metallurgy

ÇELEBİ M., GÜLER O., ÇANAKÇI A., ÇUVALCI H.

JOURNAL OF COMPOSITE MATERIALS , cilt.55, sa.24, ss.3395-3408, 2021 (SCI-Expanded)

Effects of Fe-Al intermetallic compounds on the wear and corrosion performances of AA2024/316L SS metal/metal composites

ÇANAKÇI A., ÖZKAYA S., ERDEMİR F., KARABACAK A. H., ÇELEBİ M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.845, 2020 (SCI-Expanded)

Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance

GÜLER O., ÇELEBİ M., Dalmış R., ÇANAKÇI A., ÇUVALCI H.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , cilt.51, sa.9, ss.4632-4646, 2020 (SCI-Expanded)

Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites

KARABACAK A. H., Çanakçı A., ERDEMİR F., ÖZKAYA S., ÇELEBİ M.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.5, ss.416-423, 2020 (SCI-Expanded)

Effect of nano alumina content on corrosion behavior and microstructure of Za27/graphite/alumina hybrid nanocomposites

GÜLER O., ERDEMİR F., ÇELEBİ M., Cuvalc H., Canak A.

RESULTS IN PHYSICS , cilt.15, 2019 (SCI-Expanded)

Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites

GÜLER O., ÇUVALCI H., GÖKDAĞ M., ÇANAKÇI A., ÇELEBİ M.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.36, sa.7, ss.899-907, 2018 (SCI-Expanded)

THE EFFECT OF NANO GRAPHITE PARTICLE CONTENT ON THE WEAR BEHAVIOUR OF ZA27 BASED HYBRID COMPOSITES

Guler O., Cuvalci H., Canakci A., Celebi M.

ADVANCED COMPOSITES LETTERS , cilt.26, sa.2, ss.30-36, 2017 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

UNIVERSAL JOURNAL OF MATERIALS SCIENCE , cilt.6, sa.5, ss.163-169, 2018 (Hakemli Dergi)

PRODUCTION AND PROPERTIES OF AL2024-2 WT. (SiC-B4C) HYBRID NANOCOMPOSITE

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

Technological Applied Sciences , cilt.13, sa.1, ss.29-33, 2018 (Hakemli Dergi)

The Characterization of Graphite Nanoparticle Reinforced ZA27 based Nanocomposites Fabricated by Powder Metallurgy

ÇELEBİ M., GÜLER O., ÇUVALCI H., ÇANAKÇI A.

Progress in Materials Science and Engineering , cilt.1, sa.1, ss.1-12, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Investigation of the Production AA2024 Alloy by Thixoforging and its Mechanical Properties

Tamer F. B., Çanakçı A., Çelebi M.

9th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences, Baku, Azerbaycan, 20 - 22 Aralık 2024, ss.1-2

Analysis of NiTinol Alloy Applications in Automotive Industry and Their Fabrication Through Powder Metallurgy Processes: A Review

Tamer F. B., Çanakçı A., Çelebi M.

9th International Azerbaijan Congress on Life, Engineering, Mathematical, and Applied Sciences, Baku, Azerbaycan, 20 - 22 Aralık 2024, ss.1-2

Influence of Carbon Nanotube Reinforcement on the Powder Characteristics of Al2024 Matrix via Mechanical Alloying

Çelebi M., Karabacak A. H., Tamer F. B.

3rd International Conference on Recent Academic Studies, Konya, Türkiye, 3 - 04 Aralık 2024, ss.247-252

Investigation of the Impact of High CNT Reinforcement on the Properties of Al2024/CNT Nanocomposites

Çelebi M., Çanakçı A., Tamer F. B.

3rd International Conference on Recent Academic Studies, Konya, Türkiye, 3 - 04 Aralık 2024, ss.253-259

Investigation Of The Effect Of Increasing B4C Reinforcement Amount On Powder Morphology And Physical Properties In Mechanical Alloying In Aa2024 Matrix Composites

Tunç S. A., Çanakçı A., Çelebi M.

2. International Üsküdar Scientific Research and Innovation Congress, İstanbul, Türkiye, 29 - 30 Kasım 2024, ss.955-963

The Investigation of the Effect of Increasing B4C Amount on Mechanical Properties and Microstructures of Composites in AA2024 Matrix Composites Produced By Powder Metallurgy

Tunç S. A., Karabacak A. H., Çelebi M.

10th International Artemis Scientific Research Congress, Bucuresti, Romanya, 29 - 30 Kasım 2024, ss.32-39

EFFECT OF NANO-B4C REINFORCEMENT ON THE PHYSICAL, MECHANICAL, AND WEAR PROPERTIES OF AL2024/GRAPHITE/B4C HYBRID NANOCOMPOSITES

Çelebi M., Çanakçı A., Karabacak A. H.

1. INTERNATIONAL AVRASYA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Baku, Azerbaycan, 22 - 24 Kasım 2024, ss.795-805

DEVELOPMENT AND CHARACTERIZATION OF A FUNCTIONALLY GRADED Al2024-B4C COMPOSITE VIA PLANETARY BALL MILLING AND HOT-PRESSING TECHNIQUES

Karabacak A. H., Çanakçı A., Çelebi M.

1. INTERNATIONAL AVRASYA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Baku, Azerbaycan, 22 - 24 Kasım 2024, ss.824-831

PRODUCTION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024-B4C COMPOSITES: DENSITY, TENSILE TESTING, AND RADIATION ABSORPTION PROPERTIES

Karabacak A. H., Çelebi M., Tunç S. A.

1. INTERNATIONAL AVRASYA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Baku, Azerbaycan, 22 - 24 Kasım 2024, ss.817-823

EFFECT OF NANO-B4C REINFORCEMENT ON THE POWDER SIZE, POWDER HARDNESS, AND POWDER MORPHOLOGY OF AL2024/GRAPHITE/B4C HYBRID NANOCOMPOSITES

Çelebi M., Karabacak A. H., Tunç S. A.

1. INTERNATIONAL AVRASYA SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Baku, Azerbaycan, 22 - 24 Kasım 2024, ss.806-816

AA5083-Cr Composite Example in terms of Production and Investigation of Metal-Metal Composites

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.

AKDENIZ 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.25-29

Fabrication and Characterization of AA5083-Ni Metal-Metal Composites

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.

AKDENIZ 10th INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Girne, Kıbrıs (Kktc), 2 - 05 Kasım 2023, ss.15-20

EFFECT OF H-BN CONTENT ON MORPHOLOGY, PARTICLE SIZE, AND MICROHARDNESS OF Al2024/B4C/h-BN HYBRID NANOCOMPOSITE POWDERS

Çelebi M., Karabacak A. H., Özkaya S., Tunç S. A.

5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS, Rize, Türkiye, 8 - 10 Kasım 2023, ss.1357-1364

MICROSTRUCTURAL AND MECHANICAL RESPONSE OF Al2024/H-BN/B4C HYBRID NANOCOMPOSITES TO VARYING H-BN CONTENT VIA POWDER METALLURGY

Çelebi M., Çanakçı A., Karabacak A. H., Özkaya S.

5TH INTERNATIONAL BLACK SEA MODERN SCIENTIFIC RESEARCH CONGRESS , Rize, Türkiye, 8 - 10 Kasım 2023, ss.1351-1356

Effect Of Sınterıng Temperature On Some Mechanıcal Propertıes Of Hydroxyapatıte Matrıx Ag-Reınforced Bıomaterıals

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.

KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.27-35

Effect Of Secondary Phases On The Mehcanıcal And Antıbacterıal Propertıes Of Hydroxyapatıte Matrıx Cnt Reınforced Bıocomposıtes

Özkaya S., Çanakçı A., Çelebi M., Karabacak A. H.

KARADENİZ 14TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCES, Batumi, Gürcistan, 13 - 15 Ekim 2023, ss.36-43

FABRICATION OF Ti-HAP-CNT HYBRID COMPOSITE BIOMATERIALS AND INVESTIGATION OF PROPERTIES

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.86-96

FABRICATION and PROPERTIES INVESTIGATION of FeNiCuCrAl-1% B4C HIGH ENTROPY ALLOY

Karabacak A. H., Çanakçı A., Çelebi M., Özkaya S.

UMTEB – XIV International Scientific Research Congress, Naples, İtalya, 14 - 15 Eylül 2023, ss.97-108

FABRICATION AND PROPERTIES OF FENICUCRAL HIGH ENTROPY ALLOYS BY POWDER METALLURGY

Karabacak A. H., Çelebi M., Özkaya S., Tunç S. A.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.335-345

PRODUCTION AND PROPERTİES OF TI-HAP-CNT HYBRID BIOMATERIAL POWDERS BY POWDER

Karabacak A. H., Çanakçı A., Özkaya S., Çelebi M.

2. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.320-334

The Effect of Different PCA Types on the Properties of AA2024-B4C Composites

Tunç S. A., Çanakçı A., Karabacak A. H., Çelebi M.

2. BİLSEL International World Science and Research Congress, İstanbul, Türkiye, 16 - 17 Eylül 2023, ss.417-425

Effect of multi-walled CNT dispersion on the Mechanical Properties of Novolac hybrid nanocomposites

Kocaman M., Çuvalcı H., Çelebi M.

2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 15 - 18 Ekim 2022, ss.126-130

The Effect of Aging Time and Temperature on The Hardness and Tensile Strength of Al2024 Alloy and Al2024/Graphene/B4C Hybrid Nanocomposite

Çelebi M., Çanakçı A., Kocaman M.

2nd International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 15 - 18 Ekim 2022, ss.1104-1107

CNC Machining of B4C Reinforcement Metal Matrix Nanocomposites

Karabacak A. H., Çelebi M.

3rd International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 20 - 23 Temmuz 2022, ss.1286-1289

The Microstructures and Mechanical Properties of Al2024/ h-bN/B4C Hybrid Nanocomposites Fabricated by Powder Metallurgy

Çelebi M., Çanakçı A.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.482-485

Machining of Metal Matrix Hybrid Nanocomposites with CNC milling method

Karabacak A. H., Çelebi M.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.457-461

The Effect of Graphene nano-Particle Content on the Wear Behavior of Zn-Al Alloy Based and B4C Reinforced Hybrid Nanocomposites

Çelebi M., Karabacak A. H.

1st International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 10 - 13 Mayıs 2022, ss.478-481

Wear Behavior of AA2024-316L SS Metal Metal Composites

Karabacak A. H., Çanakçı A., Özkaya S., Erdemir F., Çelebi M.

IES’20 International Engineering Symposium Engineering Applications in Industry, İzmir, Türkiye, 10 - 13 Aralık 2020, ss.1-2

The Effect of Hex-Boron Nitride Content on the Mechanical and Tribological Properties of Al-Based Alloy Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.1157-1161

Mechanical and Physical Properties of Al2024-B4C/SiC Hybrid Nanocomposite by Fabrication Powder Metallurgy

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.710-715

Production and Comparison of Properties of B4C and SiC Reinforced Nanocomposites

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 - 21 Eylül 2019, ss.716-720

Fabrication and Investigation of Properties of Hydroxyapatite CNT Bioceramics

ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H., ÇELEBİ M.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.645-650

The Effect of Mechanical milling on the Microstructure and Particle Morphology of ZnAl40Cu2/B4C/GrapheneHybridNanocomposites

ÇELEBİ M., ÖZKAYA S., ÇANAKÇI A., KARABACAK A. H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 19 Eylül - 21 Kasım 2019, ss.1162-1165

Consodilation and Investigation of Properties of Hydroxyapatite-316L Stainless Steel Composites

Karabacak A. H., Özkaya S., Çanakçı A., Varol T., Çelebi M., Erdemir F.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 29 Haziran 2018, ss.828-834

PRODUCTION OF Al2024 FOAMS BY POWDER SPACE HOLDER TECHNIQUE

VAROL T., ÇELEBİ M., ÇANAKÇI A., ÖZKAYA S.

19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.5-7

The Production and Characterization of B4C and Graphene Nanoparticle Reinforced Fe Based Brake Materials

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., VAROL T.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazig, TURKEY, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.1752-1756

The Investigation of Wear Performance of Fe/B4C/Graphene Hybrid Nanocomposites

ÇANAKÇI A., ARPACI K. A., ÇELEBİ M., ÖZKAYA S., ÇALIGÜLÜ U., ERDEMİR F.

8th International Advanced Technologies Symposium (IATS’17), October 19-22, 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.23

Production and Properties of Al2024- 2 wt. (SiC-B4C) HybridNanocomposite

KARABACAK A. H., ÇANAKÇI A., ÖZKAYA S., ÇELEBİ M., YALÇIN E. D.

International Conference on Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1322-1327

Metal Foams Produced by Powder Metallurgy Methods and Applications

ÇANAKÇI A., KESKİN Ö. Y., ÖZKAYA S., ÇELEBİ M.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.27-30

Production of Biomaterials by Powder Metallurgy Methods and Applications

ÖZKAYA S., ÇANAKÇI A., ÇELEBİ M., KESKİN Ö. Y.

8th International Advanced Technologies Symposium, Elazığ, Türkiye, 18 - 22 Ekim 2017, ss.26-29

A Review on The Powder Coating with Mechanical Milling

ERDEMİR F., ÇANAKÇI A., VAROL T., ÇELEBİ M., ÖZKAYA S.

3rd International Porous and Powder Materials Symposium and Exhibition PPM 2017, İzmir, Türkiye, 12 - 15 Eylül 2017, ss.228-232

The Effect of Milling Time on the Physical and Mechanical Properties of the ZA27-Graphite Nano-Composites

GÜLER O., ÇUVALCI H., ÇELEBİ M., ÇANAKÇI A.

2.Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.683-686

The Effect of Milling Time on the Morphology and Size of ZA27 Based Composite Powders

GÜLER O., ÇUVALCI H., ÇELEBİ M., ÇANAKÇI A.

2. Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.687-689

Mechanical Properties of ZA27/Graphene Nanocomposites Produced by Powder Metallurgy Method

YALÇIN E. D., ÇANAKÇI A., ERDEMİR F., VAROL T., ÇELEBİ M.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.371-374

The Effect of Milling Time on the Mechanical Properties of ZA27/Al2O3 Nanocomposites

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H., GÜLER O., ERDEMİR F.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.364-370

Resistance of ZA27 Matrix Reinforced with Nanographene Particle

YALÇIN E. D., ÇANAKÇI A., ÇUVALCI H., ERDEMİR F., ÇELEBİ M.

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), 28 - 30 Haziran 2017, ss.352-357

Effects Of Alumina Nanoparticle Content On The Microstructure And Mechanical Properties Of ZA27/Al2O3 Nanocomposites Fabricated By Powder Metallurgy

ÇELEBİ M., ÇUVALCI H., ÇANAKÇI A., GÜLER O., VAROL T.

4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.353-358

THE EFFECT OF NANO PARTICLE REINFORCEMENT ONMICROSTRUCTURE AND MECHANICAL PROPERTIES OF ZA27/GRAPHITEAND ZA27/Al2O3 COMPOSITES FABRICATED BY HOT PRESSING METHOD

Çelebi M., Çuvalcı H., Çanakçı A., Güler O., Erdemir F.

3rd Aegean Composite Materials Symposium with International Participation, İzmir, Türkiye, 5 - 07 Kasım 2015, ss.580-584

Nano-Parçacık Takviyesinin Mekanik Alaşımlama Yöntemiyle Üretilen Za-27/Al2o3 Kompozitlerinin Mekanik Özelliklerine Etkisi

Çelebi M., Çuvalcı H., Çanakçı A., Güler O.

Symposium of New Technologies in Engineering , Bayburt, Türkiye, 22 - 24 Ekim 2015, ss.204-210

FABRICATION OF NANOGRAPHITE REINFORCED ZA-BASED 27 ALLOY MATRIX COMPOSITES BY MECHANICAL ALLOYING METHOD

ÇELEBİ M., ÇANAKÇI A., ÇUVALCI H.

International Porous and Powder Materials, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.101-105

Metrikler

Yayın

Atıf (WoS)

233

H-İndeks (WoS)

Atıf (Scopus)

254

H-İndeks (Scopus)

Atıf (Scholar)

312

H-İndeks (Scholar)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Açık Erişim