Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effect of Y2O3 addition and milling time on the synthesis of nanocrystalline Ag-ZnO composite powder via mechanical alloying

BIYIK S.
JOURNAL OF RADIATION RESEARCH AND APPLIED SCIENCES , sa.2, 2024 (SCI-Expanded) identifier

The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating

GÜLER O., VAROL T., ALVER Ü., BIYIK S.
Advanced Powder Technology , cilt.32, ss.2873-2890, 2021 (SCI-Expanded) identifier identifier

Effect of Cubic and Hexagonal Boron Nitride Additions on the Synthesis of Ag-SnO2 Electrical Contact Material

BIYIK S.
JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS , cilt.14, sa.7, ss.1010-1015, 2019 (SCI-Expanded) identifier

Influence of Type of Process Control Agent on the Synthesis of Ag8ZnO Composite Powder

Biyik S.
ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.778-781, 2019 (SCI-Expanded) identifier identifier

Effect of Polyethylene Glycol on the Mechanical Alloying Behavior of Cu-W Electrical Contact Material

Biyik S.
ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.208-212, 2018 (SCI-Expanded) identifier identifier

Optimization of Mechanical Alloying Parameters of Cu25W Electrical Contact Material

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.909-912, 2017 (SCI-Expanded) identifier identifier

Characterization of Nanocrystalline Cu25Mo Electrical Contact Material Synthesized via Ball Milling

Biyik S.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.886-888, 2017 (SCI-Expanded) identifier identifier

Fabrication and Arc-Erosion Behavior of Ag8SnO(2) Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.339-342, 2017 (SCI-Expanded) identifier identifier

Investigation of the Effect of Different Current Loads on the Arc-Erosion Performance of Electrical Contacts

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.656-660, 2016 (SCI-Expanded) identifier identifier

The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

Biyik S., Aydin M.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1255-1260, 2015 (SCI-Expanded) identifier identifier

Arc-Erosion Behavior of Boric Oxide-Reinforced Silver-Based Electrical Contact Materials Produced by Mechanical Alloying

BIYIK S., Arslan F., AYDIN M.
JOURNAL OF ELECTRONIC MATERIALS , cilt.44, sa.1, ss.457-466, 2015 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

Influence of Polyethylene Glycol and Methanol Additions on the Properties of Ball-Milled Cu4B4C Composite Powders

BIYIK S.
International Journal of Computational and Experimental Science and Engineering (IJCESEN) , cilt.10, sa.3, 2024 (Hakemli Dergi)

Cu25W Kompozit Tozunun Bilyeli Öğütme Yöntemiyle Üretimine Farklı İşlem Kontrol Katkılarının Etkisinin İncelenmesi

BIYIK S.
Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.9, sa.2, ss.222-228, 2019 (Hakemli Dergi)

Effect of Reinforcement Ratio on Physical and Mechanical Properties of Cu-W Composites Synthesized by Ball Milling

BIYIK S.
MATERIALS FOCUS , cilt.7, sa.4, ss.535-541, 2018 (Hakemli Dergi) identifier
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Effect of Methanol Addition on the Particle Size and Morphology of Al-Cu Composites

BIYIK S., ÇANAKÇI A., TUNÇ S. A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.51-57

Influence of Gradual Process Control Agent Technique on the Ball-Milling Behavior of Cu Powder

BIYIK S., ÇANAKÇI A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.58-64

Influence of Nanographene and Methanol Additions on the Mechanical Alloying Behavior of Al-Cu/SiC/NG Composites

BIYIK S., ÇANAKÇI A., TUNÇ S. A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.42-50

Effect of Nano TiC and Process Control Agent Additions on the Synthesis of Cu-TiC Composite Powder

BIYIK S., ÇANAKÇI A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.34-41

Synthesis and Characterization of Y2O3-doped Nanocrystalline Ag-ZnO Electrical Contact Material via Ball Milling

BIYIK S.
10th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 27 - 30 Ekim 2023, ss.158

Effect of Matrix Particle Size on the Mechanical Alloying Behavior of Tungsten Carbide Reinforced Copper Based Composite Powder

BIYIK S.
10th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 27 - 30 Ekim 2023, ss.35-40

Influence of Type of Process Control Agent on the Synthesis of Ag8ZnO Composite Powder

BIYIK S.
8th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 24 - 30 Nisan 2018, ss.105

Influence of Refractory Metal Additions on the Synthesis of Cu-Based Composite Powders

Bıyık S.
Chemistry Conference for Young Scientists (ChemCYS), Bruges, Belçika, 21 - 23 Şubat 2018, ss.221

Effect of Cubic and Hexagonal Boron Nitride Additions on the Synthesis of Ag-SnO2 Electrical Contact Material

BIYIK S.
4th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 4 - 08 Ekim 2017, ss.623

Effect of Reinforcement Ratio on Physical and Mechanical Properties of Cu-W Composites Synthesized by Ball Milling

BIYIK S.
4th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 4 - 08 Ekim 2017, ss.624

Effect of Type of Process Control Agent on the Synthesis and Characterization of Cu25W Composite Powder

BIYIK S.
9th International Conference on Porous Media & Annual Meeting, Rotterdam, Hollanda, 8 - 11 Mayıs 2017, ss.48

Investigation of Particle Size Effect on the Synthesis of W-Reinforced Cu-Based Composite Powder

Bıyık S.
9th International Conference on Porous Media & Annual Meeting, Rotterdam, Hollanda, 8 - 11 Mayıs 2017, ss.55

Effect of Polyethylene Glycol on the Synthesis of Cu25W Electrical Contact Material

BIYIK S.
7th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 22 - 26 Nisan 2017, ss.89

Optimization of Mechanical Alloying Parameters in Cu25W Electrical Contact Material

BIYIK S., AYDIN M.
3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.475

Synthesis and Characterization of Nanocrystalline Cu25Mo Electrical Contact Material via Ball Milling

BIYIK S.
3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.474

Effect of TiO2 on Physical and Mechanical Properties of Electrical Contact Materials

Bıyık S., Aydın M.
15th European Mechanics of Materials Conference, Brussels, Belçika, 7 - 09 Eylül 2016, ss.459

Fabrication and Arc-Erosion Behavior of Ag8SnO2 Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
6th The International Advances in Applied Physics and Materials Science Congress & Exhibition, İstanbul, Türkiye, 1 - 03 Haziran 2016, ss.128

Effect of TiO2 Dopant on Particle Size and Morphology of Ag8SnO2 Composite Powder

Bıyık S., Aydın M.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.170-175

Influence of Sintering Temperature on Physical and Mechanical Properties of Ag8SnO2 Electrical Contact Material

Bıyık S., Aydın M.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.164-169

Investigation of the Effect of Different Current Loads on the Arc Erosion Performance of Electrical Contacts Using New Life Test Equipment

Bıyık S., Aydın M.
5th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 16 - 19 Nisan 2015, ss.323

The Effect of Ball to Powder Weight Ratio on Particle Size and Morphology of Cu25W Composite Powder

Bıyık S., Aydın M.
7th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.76-77

The effect of the amount of process control agent on the properties of Cu25W composite powder

Bıyık S., Aydın M.
International Conference on High Performance and Optimum Design of Structures and Materials, HPSM/OPTI 2014, Ostend, Belçika, 9 - 11 Haziran 2014, cilt.137, ss.189-200 identifier

The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

Bıyık S., Aydın M.
4th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 24 - 27 Nisan 2014, ss.981

A new life test equipment designed for medium duty electromagnetic contactors

Bıyık S., Aydın M.
IEEE 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EurosimE), Ghent, Belçika, 7 - 09 Nisan 2014, ss.1-7 identifier

Investigation of the Compaction Behaviour of Ag8ZnO Composite Produced by Mechanical Alloying

Bıyık S., Aydın M.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.145-149

Toz Metalurjisi Yöntemiyle Gümüş-Bor Oksit Esaslı Elektrik Kontak Malzemelerinin Üretimi ve Özelliklerinin İncelenmesi

Bıyık S.
METALİK FİKİRLER 1. Ar-Ge Proje Pazarı, İstanbul, Türkiye, 31 Ekim 2012, ss.150

Investigation of Properties of Silver - Boric Oxide Based Contact Materials Produced by Powder Metallurgy

BIYIK S., ARSLAN F.
6th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.671-678
Metrikler

Yayın

41

Atıf (WoS)

584

H-İndeks (WoS)

12

Proje

1