Yayınlar & Eserler

Yayın Ağı
Makaleler 15
Tümü (15)
SCI-E, SSCI, AHCI (11)
SCI-E, SSCI, AHCI, ESCI (12)
Scopus (10)
TRDizin (3)
Diğer Yayınlar (1)

1. TUNGSTEN KARBÜR TAKVİYELİ BAKIR ESASLI KOMPOZİT TOZUNUN MEKANİK ALAŞIMLAMA YÖNTEMİYLE SENTEZİNE İŞLEM KONTROL KATKILARININ ETKİSİ

BIYIK S.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.29, sa.3, ss.713-724, 2024 (Hakemli Dergi)

2. Influence of Polyethylene Glycol and Methanol Additions on the Properties of Ball-Milled Cu4B4C Composite Powders

BIYIK S.
International Journal of Computational and Experimental Science and Engineering (IJCESEN) , cilt.10, sa.3, 2024 (Scopus) identifier

3. Effect of Y2O3 addition and milling time on the synthesis of nanocrystalline Ag-ZnO composite powder via mechanical alloying

BIYIK S.
JOURNAL OF RADIATION RESEARCH AND APPLIED SCIENCES , sa.2, 2024 (SCI-Expanded) identifier

4. The wear and arc erosion behavior of novel copper based functionally graded electrical contact materials fabricated by hot pressing assisted electroless plating

GÜLER O., VAROL T., ALVER Ü., BIYIK S.
Advanced Powder Technology , cilt.32, ss.2873-2890, 2021 (SCI-Expanded) identifier identifier

5. Effect of Cubic and Hexagonal Boron Nitride Additions on the Synthesis of Ag-SnO2 Electrical Contact Material

BIYIK S.
JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS , cilt.14, sa.7, ss.1010-1015, 2019 (SCI-Expanded) identifier

6. Cu25W Kompozit Tozunun Bilyeli Öğütme Yöntemiyle Üretimine Farklı İşlem Kontrol Katkılarının Etkisinin İncelenmesi

BIYIK S.
Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.9, sa.2, ss.222-228, 2019 (Hakemli Dergi)

7. Influence of Type of Process Control Agent on the Synthesis of Ag8ZnO Composite Powder

Biyik S.
ACTA PHYSICA POLONICA A , cilt.135, sa.4, ss.778-781, 2019 (SCI-Expanded) identifier identifier

8. Effect of Reinforcement Ratio on Physical and Mechanical Properties of Cu-W Composites Synthesized by Ball Milling

BIYIK S.
MATERIALS FOCUS , cilt.7, sa.4, ss.535-541, 2018 (Hakemli Dergi) identifier

9. Effect of Polyethylene Glycol on the Mechanical Alloying Behavior of Cu-W Electrical Contact Material

Biyik S.
ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.208-212, 2018 (SCI-Expanded) identifier identifier

10. Characterization of Nanocrystalline Cu25Mo Electrical Contact Material Synthesized via Ball Milling

Biyik S.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.886-888, 2017 (SCI-Expanded) identifier identifier

11. Optimization of Mechanical Alloying Parameters of Cu25W Electrical Contact Material

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.909-912, 2017 (SCI-Expanded) identifier identifier

12. Fabrication and Arc-Erosion Behavior of Ag8SnO(2) Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.131, sa.3, ss.339-342, 2017 (SCI-Expanded) identifier identifier

13. Investigation of the Effect of Different Current Loads on the Arc-Erosion Performance of Electrical Contacts

BIYIK S., AYDIN M.
ACTA PHYSICA POLONICA A , cilt.129, sa.4, ss.656-660, 2016 (SCI-Expanded) identifier identifier

14. The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

Biyik S., Aydin M.
ACTA PHYSICA POLONICA A , cilt.127, sa.4, ss.1255-1260, 2015 (SCI-Expanded) identifier identifier

15. Arc-Erosion Behavior of Boric Oxide-Reinforced Silver-Based Electrical Contact Materials Produced by Mechanical Alloying

BIYIK S., Arslan F., AYDIN M.
JOURNAL OF ELECTRONIC MATERIALS , cilt.44, sa.1, ss.457-466, 2015 (SCI-Expanded) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 31

1. Effect of Grinding Time and Methanol Content on the Synthesis of NiTi Composite Powders

BIYIK S., ÇANAKÇI A., TAMER F. B.
2nd International Conference on Engineering, Natural Sciences, and Technological Developments, Bayburt, Türkiye, 20 - 23 Haziran 2025, ss.627-633, (Tam Metin Bildiri)

2. Effect of Zinc Stearate and Ball-to-Powder Weight Ratio on the Ball Milling Behavior of Cu-B4C Composite Powder

BIYIK S.
International Conference on Nanochemistry, Hybrid Materials & Molecular Chemistry, GFSM 2025, Louvain-la-Neuve, Belçika, 22 - 25 Nisan 2025, ss.58, (Özet Bildiri)

3. Influence of Gradual Process Control Agent Technique on the Ball-Milling Behavior of Cu Powder

BIYIK S., ÇANAKÇI A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.58-64, (Tam Metin Bildiri)

4. Influence of Nanographene and Methanol Additions on the Mechanical Alloying Behavior of Al-Cu/SiC/NG Composites

BIYIK S., ÇANAKÇI A., TUNÇ S. A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.42-50, (Tam Metin Bildiri)

5. Effect of Nano TiC and Process Control Agent Additions on the Synthesis of Cu-TiC Composite Powder

BIYIK S., ÇANAKÇI A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.34-41, (Tam Metin Bildiri)

6. Effect of Methanol Addition on the Particle Size and Morphology of Al-Cu Composites

BIYIK S., ÇANAKÇI A., TUNÇ S. A.
7th International Conference on Sustainable Sciences and Technology, İstanbul, Türkiye, 12 - 14 Temmuz 2024, ss.51-57, (Tam Metin Bildiri)

7. Effect of Stannous Oxide and Stannic Oxide Additions on the Ball Milling Behavior of Copper Based Composite Powders

BIYIK S.
11th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 25 - 28 Ekim 2024, ss.48-54, (Tam Metin Bildiri)

8. Influence of Stearic Acid and Milling Speed on the Synthesis of Cu-B4C Composite Powder

BIYIK S.
11th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 25 - 28 Ekim 2024, ss.77-82, (Tam Metin Bildiri)

9. Synthesis and Characterization of Y2O3-doped Nanocrystalline Ag-ZnO Electrical Contact Material via Ball Milling

BIYIK S.
10th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 27 - 30 Ekim 2023, ss.158, (Özet Bildiri)

10. Effect of Matrix Particle Size on the Mechanical Alloying Behavior of Tungsten Carbide Reinforced Copper Based Composite Powder

BIYIK S.
10th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 27 - 30 Ekim 2023, ss.35-40, (Tam Metin Bildiri)

11. Influence of Type of Process Control Agent on the Synthesis of Ag8ZnO Composite Powder

BIYIK S.
8th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 24 - 30 Nisan 2018, ss.105, (Özet Bildiri)

12. Influence of Refractory Metal Additions on the Synthesis of Cu-Based Composite Powders

Bıyık S.
Chemistry Conference for Young Scientists (ChemCYS), Bruges, Belçika, 21 - 23 Şubat 2018, ss.221, (Özet Bildiri)

13. Effect of Cubic and Hexagonal Boron Nitride Additions on the Synthesis of Ag-SnO2 Electrical Contact Material

BIYIK S.
4th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 4 - 08 Ekim 2017, ss.623, (Özet Bildiri)

14. Effect of Reinforcement Ratio on Physical and Mechanical Properties of Cu-W Composites Synthesized by Ball Milling

BIYIK S.
4th International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 4 - 08 Ekim 2017, ss.624, (Özet Bildiri)

15. Investigation of Particle Size Effect on the Synthesis of W-Reinforced Cu-Based Composite Powder

Bıyık S.
9th International Conference on Porous Media & Annual Meeting, Rotterdam, Hollanda, 8 - 11 Mayıs 2017, ss.55, (Özet Bildiri)

16. Effect of Type of Process Control Agent on the Synthesis and Characterization of Cu25W Composite Powder

BIYIK S.
9th International Conference on Porous Media & Annual Meeting, Rotterdam, Hollanda, 8 - 11 Mayıs 2017, ss.48, (Özet Bildiri)

17. Effect of Polyethylene Glycol on the Synthesis of Cu25W Electrical Contact Material

BIYIK S.
7th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 22 - 26 Nisan 2017, ss.89, (Özet Bildiri)

18. Optimization of Mechanical Alloying Parameters in Cu25W Electrical Contact Material

BIYIK S., AYDIN M.
3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.475, (Özet Bildiri)

19. Synthesis and Characterization of Nanocrystalline Cu25Mo Electrical Contact Material via Ball Milling

BIYIK S.
3rd International Conference on Computational and Experimental Science and Engineering, Antalya, Türkiye, 19 - 24 Ekim 2016, ss.474, (Özet Bildiri)

20. Effect of TiO2 on Physical and Mechanical Properties of Electrical Contact Materials

Bıyık S., Aydın M.
15th European Mechanics of Materials Conference, Brussels, Belçika, 7 - 09 Eylül 2016, ss.459, (Özet Bildiri)

21. Fabrication and Arc-Erosion Behavior of Ag8SnO2 Electrical Contact Materials under Inductive Loads

BIYIK S., AYDIN M.
6th The International Advances in Applied Physics and Materials Science Congress & Exhibition, İstanbul, Türkiye, 1 - 03 Haziran 2016, ss.128, (Özet Bildiri)

22. Influence of Sintering Temperature on Physical and Mechanical Properties of Ag8SnO2 Electrical Contact Material

Bıyık S., Aydın M.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.164-169, (Tam Metin Bildiri)

23. Effect of TiO2 Dopant on Particle Size and Morphology of Ag8SnO2 Composite Powder

Bıyık S., Aydın M.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 15 - 18 Eylül 2015, ss.170-175, (Tam Metin Bildiri)

24. Investigation of the Effect of Different Current Loads on the Arc Erosion Performance of Electrical Contacts Using New Life Test Equipment

Bıyık S., Aydın M.
5th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 16 - 19 Nisan 2015, ss.323, (Özet Bildiri)

25. The Effect of Ball to Powder Weight Ratio on Particle Size and Morphology of Cu25W Composite Powder

Bıyık S., Aydın M.
7th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.76-77, (Tam Metin Bildiri)

26. The effect of the amount of process control agent on the properties of Cu25W composite powder

Bıyık S., Aydın M.
International Conference on High Performance and Optimum Design of Structures and Materials, HPSM/OPTI 2014, Ostend, Belçika, 9 - 11 Haziran 2014, cilt.137, ss.189-200, (Tam Metin Bildiri) identifier

27. The Effect of Milling Speed on Particle Size and Morphology of Cu25W Composite Powder

Bıyık S., Aydın M.
4th The International Advances in Applied Physics and Materials Science Congress & Exhibition, Muğla, Türkiye, 24 - 27 Nisan 2014, ss.981, (Özet Bildiri)

28. A new life test equipment designed for medium duty electromagnetic contactors

Bıyık S., Aydın M.
IEEE 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EurosimE), Ghent, Belçika, 7 - 09 Nisan 2014, ss.1-7, (Tam Metin Bildiri) identifier

29. Investigation of the Compaction Behaviour of Ag8ZnO Composite Produced by Mechanical Alloying

Bıyık S., Aydın M.
International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 3 - 06 Eylül 2013, ss.145-149, (Tam Metin Bildiri)

30. Toz Metalurjisi Yöntemiyle Gümüş-Bor Oksit Esaslı Elektrik Kontak Malzemelerinin Üretimi ve Özelliklerinin İncelenmesi

Bıyık S.
METALİK FİKİRLER 1. Ar-Ge Proje Pazarı, İstanbul, Türkiye, 31 Ekim 2012, ss.150, (Özet Bildiri)

31. Investigation of Properties of Silver - Boric Oxide Based Contact Materials Produced by Powder Metallurgy

BIYIK S., ARSLAN F.
6th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 5 - 09 Ekim 2011, ss.671-678, (Tam Metin Bildiri)
Metrikler

Yayın

46

Yayın (WoS)

12

Yayın (Scopus)

12

Atıf (WoS)

666

H-İndeks (WoS)

13

Proje

1