Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Fabrication of NanoSiC-Reinforced Al2024 Matrix Composites by a Novel Production Method

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, no.10, pp.1-10, 2016 (Journal Indexed in SCI Expanded)

Development and characterization of bronze-Cr-Ni composites produced by powder metallurgy

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.22, no.4, pp.425-432, 2015 (Journal Indexed in SCI) identifier identifier

Synthesis and characterization of hybrid nanocomposite powders via mechanical alloying

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, vol.45, no.1, pp.67-72, 2015 (Journal Indexed in SCI Expanded)

New Coating Technique for Al-B4C Composite Coatings by Mechanical Milling and Composite Coating

POWDER METALLURGY AND METAL CERAMICS, vol.53, no.11-12, pp.672-679, 2015 (Journal Indexed in SCI) identifier identifier

NEW COATING TECHNIQUE FOR Al–B4C COMPOSITE COATINGS BY MECHANICAL MILLING AND COMPOSITE COATING

POWDER METALLURGY AND METAL CERAMICS, pp.672-678, 2015 (Journal Indexed in SCI Expanded)

Synthesis and Characterization of Hybrid Nanocomposite powders via Mechanical Alloying

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, no.45, pp.67-72, 2015 (Journal Indexed in SCI Expanded)

SYNTHESIS AND CHARACTERIZATION OF HYBRID NANOCOMPOSITE POWDERS VIA MECHANICAL ALLOYING

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, vol.45, no.1, pp.67-72, 2015 (Journal Indexed in SCI) identifier identifier

Effect of process parameters on the formation of Fe-Al intermetallic coating fabricated by mechanical alloying

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, vol.21, no.6, pp.595-600, 2014 (Journal Indexed in SCI) identifier identifier

Physical and mechanical properties of stir-casting processed AA2024/B4Cp composites

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.21, no.4, pp.505-515, 2014 (Journal Indexed in SCI) identifier identifier

Prediction of the influence of processing parameters on synthesis of composite powders in planetary mill using artificial neural network

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.21, no.3, pp.411-420, 2014 (Journal Indexed in SCI Expanded)

Synthesis and characterization of nanocrystalline Al 2024-B4C composite powders by mechanical alloying

PHILOSOPHICAL MAGAZINE LETTERS, vol.93, no.6, pp.339-345, 2013 (Journal Indexed in SCI) identifier identifier

STRUCTURAL EVOLUTION AND CHARACTERIZATION OF NANOSTRUCTURED Al-Al2O3 COMPOSITE FABRICATED BY MECHANICAL ALLOYING METHOD

REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, vol.43, no.3, pp.312-319, 2013 (Journal Indexed in SCI) identifier identifier

The effect of mechanical alloying on Al2O3 distribution and properties of Al2O3 particle reinforced Al-MMCs

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, vol.19, no.3, pp.227-235, 2012 (Journal Indexed in SCI) identifier identifier

Articles Published in Other Journals

Al2024/SiC Kompozitlerin Yüksek SiC Takviyesi ile Üretimi ve Karakterizasyonu

Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, vol.22, no.2, pp.353-365, 2022 (Other Refereed National Journals)

Akımsız kaplama yöntemi ile Cu-Ag bimetal parçacıkların üretimi ve karakterizasyonu

Gümüşhane Üniversitesi Fen Bilimleri Dergisi, 2021 (Other Refereed National Journals)

Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology

International Journal of Lightweight Materials and Manufacture, vol.3, no.2, pp.127-135, 2020 (Refereed Journals of Other Institutions) identifier

Artificial Neural Network Approach to Predict the Abrasive Wear of AA2024-B4C Composites

Universal Journal of Materials Science, no.6, pp.111-118, 2014 (Other Refereed National Journals)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

Universal Journal of Materials Science, vol.2, pp.90-95, 2014 (Refereed Journals of Other Institutions)

Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying

Usak University Journal of Material Sciences, no.1, pp.47-53, 2014 (National Refreed University Journal)

Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method

Usak University Journal of Material Sciences, no.1, pp.15-22, 2014 (National Refreed University Journal)

Microstructure and Properties of Al-B4C Functionally Graded Materials Produced by Powder Metallurgy Method

Universal Journal of Materials Science, no.5, pp.90-95, 2014 (Refereed Journals of Other Institutions)

Production and microstructure of AA2024 – B4C metal matrix composites by mechanical alloying method

Usak University Journal of Material Sciences, no.1, pp.15-22, 2012 (National Refreed University Journal)

Refereed Congress / Symposium Publications in Proceedings

Effect of Ni-P Coating on The Microstructure of Copper-Based Materials Produced by Hot-Pressing

3rd International Conference on Applied Engineering and Natural Sciences, Turkey, 20 - 23 July 2022, pp.1351-1354

EFFECT OF THE ELECTROLESS NI-P COATING ON THE PROPERTIES OF CU PARTICLES

3rd International Conference on Applied Engineering and Natural Sciences, Turkey, 20 - 23 July 2022, pp.1447-1451

THE EFFECT OF GRAPHITE AMOUNT ON THE HARDNESS AND ELECTRICAL CONDUCTIVITY PROPERTIES OF COPPER-GRAPHITE COMPOSITES

International Scientific Research Congress Dedicated to the 30th Anniversary of Bakur Eurasia University, Azerbaijan, 27 April 2022, pp.1558-1565

EFFECT OF MECHANICAL MILLING TIME ON THE PROPERTIES OF COPPER-BASED MATERIALS

International Scientific Research Congress Dedicated to the 30th Anniversary of Bakur Eurasia University, Azerbaijan, 27 April 2022, pp.1549-1557

Effect of Mechanical Milling and Electroless Silver Coating on the Oxidation Resistance of Copper Powder Produced by Electrolysis

1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 May 2022, pp.2356-2360

The Effect of Electroless Coating and Ball Milling on the Properties of Cu/Ag Compact Materials

1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 May 2022, pp.2366-2370

The Effect of the Ball Milling Time on the Particle Size and Morphology of Dendritic Copper Particles

1st International Conference on Engineering and Applied Natural Sciences, Konya, Turkey, 10 May 2022, pp.2361-2365

Wear Properties of Cu-Ag-Ni Composites Produced by Electroless Coaitng and Hot-Pressing

2. Uluslararası 19 Mayıs Yenilikçi Bilimsel Yaklaşımlar Kongresi Uygulamalı Bilimler, Turkey, 27 December 2019, pp.198-207

metal köpükler

IDEF 2017 13’xxüncü Uluslararası Savunma Sanayii Fuarı, 9 - 12 May 2017

Fonksiyonel Derecelendirilmiş Al2024/ B4C Nanokompozitlerinin Balistik Performansları

2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU (IDEFIS 2017), Kırıkkale, Turkey, 6 - 08 April 2017, vol.2, pp.16-20

The ballistic performance of Functionally Graded Al2024/B4C Nanocomposites

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.650-656

Effect of Processing Parameters on Functionally Graded AlCuMg Metallic Foams

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.636-640

Effect of procecessing parameters on AlCuMg Metallic Foams

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.636-640

Metal Foams

2nd International Defense Industry Symposium, Kırıkkale, Turkey, 6 - 08 April 2017, pp.641-649

Effect of CNT Content on the Synthesis and Characterization of Copper CNT Composites Fabricated By Ball Milling

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, pp.583-588

Metallic Biomaterials Biocompatibity and Mechanical Properties

16th International Materials Symposium IMSP’2016, Denizli, Turkey, 12 - 14 October 2016, pp.1102-1109

Metallic Biomaterials Biocompability and Mechanical Properties

16th International Materials Symposium, 12 - 16 October 2016, pp.1102-1109

Development of response surface methodology for optimization of process parameters on the formation of Fe-Al intermetallic coating

1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016, vol.1, no.591, pp.53-59

Metallic Biomaterials : Biocompatibility and Mechanical properties

16 th International Materials Symposium IMSP' 2016, Denizli, Turkey, 12 - 14 October 2016, pp.1102-1109

Properties of Silicon Carbide Matrix Nanocomposites Prepared by Flake Powder Metallurgy Processing

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1346-1352

PROPERTIES OF SILICONE CARBIDE REINFORCED NANOCOMPOSITES PREPARED BY FLAKE POWDER METALLURGY

16. Uluslararası Malzeme Sempozyumu (IMSP'2016), Denizli, Turkey, 12 - 14 October 2016, vol.1, pp.1346-1352

Metallic Biomaterials: Biocompatibility and Mechanical Properties

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1102-1109

Arc erosion behavior of Cu-nanographite electrical contact materials

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.271-277

TRIBOLOGICAL PERFORMANCE UNDER DRY SLIDING CONDITIONS OF COPPER-GRAPHENE NANOCOMPOSITES

16th International Materials Symposium IMSP'2016, Denizli, Turkey, 12 - 14 October 2016, pp.1761-1766

Electrochemical Corrosion Study of Al2024/SiC Composites

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Turkey, 5 - 07 October 2016, pp.26-32

Mekanik Alaşımlamanın AlCuMg/B4C Nanokompozitlerinin Korozyon Davranışı Üzerine Etkisi

XIV. Uluslararası Korozyon Sempozyumu, Bayburt, Turkey, 5 - 07 October 2016, pp.526-530

Study on Microstructure and Wear Properties of B4C Nanoparticles reinforced ZA27 nanocomposites

International Conference of Engineering and Natural Sciences, 24 - 28 May 2016, pp.2850-2853

Development of response surface methodology for optimization of process parameters on the formation of Fe-AL intermetallic coating

1st International Mediterranean Science and Engineering Congress (IMSEC2016), Adana, Turkey, 26 - 28 September 2016, pp.2025-2030

Tribological Behaviours of ZA27/Graphene nanocomposites

3rd INTERNATIONAL CONFERENCE ON THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS, İzmir, Turkey, 1 - 03 September 2016, pp.48-49

Wear İnvestigation of Al2024/SiC Composites by response surface Methodology

3rd INTERNATIONAL CONFERENCE ON THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS, İzmir, Turkey, 1 - 03 September 2016, pp.49-50

WEAR INVESTIGATION OF Al2024/SiC COMPOSITES BY RESPONSE SURFACE METHODOLOGY

International Conference on Thermophysical and Mechanical Properties of Advanced Materials, İzmir, Turkey, 1 - 03 September 2016, pp.235-241

Corrosion Behavior of AlCuMg/B4C Nanocomposites Produced by Powder Metallurgy Method

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2846-2849

Functionally Graded Materials

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.1643-1649

Study on Microstructure and Wear Properties of B4C Nanoparticle Reinforced ZA27 Nanocomposites

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.2850-2853

Investigation of Properties of CNT Reinforced HA Biocomposites Produced by Mechanical Alloying Technique

International Conference on Engineering and Natural Sciences, Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.361

Study on Microstructure and Wear Properties of B4C nanoparticle reinforced ZA27 nanocomposites

International Conference on Engineering and Natural Sciences (ICENS 2016), Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, pp.1

WEAR PROPERTIES OF ZA 27 ALLOY AND ITS COMPOSITES REINFORCED WITH B4C AND GRAPHENE NANOPARTICLES

1st International Conference on Engeneering Technology and Applied Sciences, Afyon, Turkey, 21 - 22 April 2016, pp.1-3

THE EFFECT OF MILLING TIME ON MECHANICAL PROPERTIES OF ALCUMG-B4C NANOCOMPOSITES PRODUCED BY HIGH ENERGY MILLING

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 December 2015, pp.26-30

International Porous Powder Materials Symposium and Exhibition PPM2015

nternational Porous Powder Materials Symposium and Exhibition PPM2015 , 15 - 18 September 2015

THE MICROSTRUCTURE OF NANO B4C PARTICLE REINFORCED Al-Cu-Mg ALLOY MATRIX NANOMPOSITES PRODUCED BY FLAKE POWDER METALLURGY METHOD

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.585-590

EFFECT OF B4C CONTENT AND MILLING TIME ON WEAR BEHAVIOUR OF MECHANICALLY ALLOYED AlCuMg NANOCOMPOSITES

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.173-179

EFFECT OF MECHANICAL ALLOYING ON MECHANICAL PROPERTIES OF AlCuMg-B4C NANOCOMPOSITES

Uluslar Arası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 5 - 07 November 2015, pp.186-192

Prediction Model For Densification Behaviour of Powder Metallurgy Al Cu Mg B4C composites

International Porous and Powder Materials Symposium and Exhibition, 15 - 18 September 2015

Application of Back-Propagation Neural Network Technique to Prediction of the Abrasive Wear Behavior of Al2014/B4C Composite

TURKEYTRIB'15, 1rst International Conference on Tribology,, İstanbul, Turkey, 7 - 09 October 2015, pp.1

EFFECT OF B4C ADDITION ON WEAR BEHAVIOUR OF AlCuMg NANOCOMPOSITES

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.16-19

WEAR BEHAVIOR OF AL2024/SIC COMPOSITES PRODUCED BY POWDER METALLURGY METHODS

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.11-15

AN INVESTIGATION ON WEAR BEHAVIOR OF CU–GRAPHITE NANOCOMPOSITES PREPARED BY FLAKE POWDER METALLURGY

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.6-10

APPLICATION OF BACK-PROPAGATION NEURAL NETWORK TECHNIQUE TO PREDICTION OF THE ABRASIVE WEAR BEHAVIOR OF AL2014/B4C COMPOSİTE

TURKEYTRIB'15, 1rst International Conference on Tribology, İstanbul, Turkey, 7 - 09 October 2015, pp.1-5

PRODUCTION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/SiC-B4C HYBRID COMPOSITES BY HOT PRESSING PROCESS

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.36-39

PREDICTION MODEL FOR DENSIFICATION BEHAVIOR OF POWDER METALLURGY Al-Cu-Mg/B4C COMPOSITES

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.397-402

Prediction Model for Densification Behavior of Powder Metallurgy Al-Cu-Mg/B4C Composites

International Porous and Powder Materials Symposium and Exhibition PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.384-389

MICROSTRUCTURAL CHARACTERIZATION OF FUNCTIONALLY GRADED Al2024/Sic COMPOSITES PRODUCED BY HOT PRESSING AND CONSOLIDATION

International Porous and Powder Materials Symposium and Exhibition-PPM 2015, İzmir, Turkey, 15 - 18 September 2015, pp.31-35

Fabrication of Functionally Graded Al 2024/B4C Composites By Powder Metallurgy

15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.97-103

Production and characterization of bronze-Cr-Ni composites produced by powder metallurgy

17th International Metallurgy and Materials Congress, İstanbul, Turkey, 11 - 13 September 2014, pp.207-213

Production and characterization of Bronze-Cr-Ni composites produced by powder metallurgy

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.207-213 Creative Commons License

The effect of the contact cycles on the microstructure and performance of electrical contact materials

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.406-410

The prediction of properties of B4C particle reinforced metal matrix composites using artificial neural networks

17th International Metallurgy and MaterialsCongress, İstanbul, Turkey, 11 - 13 September 2014, pp.451-458

The Prediction of Properties of B4C Particle Reinforced Metal Matrix Composites Using Artificial Neural Networks

17th International Metallurgy and Materials Congress, İstanbul, Turkey, 11 - 13 September 2014, pp.451-458

Synthesis and characterizion of nanographite reinforced Cu matrix composite powders by high energy ball milling

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.26-27

Effect of mechanical milling on the physical and mechanical properties of powder metallurgy Al2024-B4C composites

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.22-23

Processing of AA7075 powders from recycling chips by mechanical milling

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.18-19

Analysis of the prediction of compressibility of powder metallurgy Al2024-B4C composites using artificial neural networks

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.24-25

The study on the production of Al7075-Al-SiC composites by the recycling chips

7th International Powder Metallurgy Conference and Exhibition, Ankara, Turkey, 24 - 28 June 2014, pp.20-21

Biyomalzemeler

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.649-660 Creative Commons License

Mekanik alaşımlama yöntemi ile Al2024-B4C kompozit tozlarının üretimi ve karakterizasyonu

II. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 7 - 09 November 2013, pp.781-788

Effects of different process control agent on characteristics of mechanically milled Al2024 powders

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.804-808

Fabrication Of Fe-Al Intermetallic Coatings Using Mechanical Milling Technique

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.809-813 Creative Commons License

Effects Of Different Process Control Agent On Characteristics Of Mechanically Milled Al2024 Powders

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.804-808 Creative Commons License

Microstructure and characterization of B4C reinforced Al2024 alloy matrix composites produced by mechanical alloying technique

International Porous Powder Materials Symposium & Exhibition, İzmir, Turkey, 3 - 06 September 2013, pp.150-154

Abrasive wear Behaviour of powder Metallurgy CuSn10-Graphite Metal Matrix Composites Produced by Powder Metallurgy

The proceedings of the 1st International Porous and powder Materials Symposium and Exhibition PPM 2013, İzmir, Turkey, 3 - 06 September 2013, pp.58-62

Artificial Neural Network Approach to Predict of Effect of Process Control Agent on the Microhardness of Al-Al2O3 Composite Powders Produced by Mechanical Alloying

The 1st International Porous and Powder Materials Symposium and Exhibition PPM 2013, İzmir, Turkey, 3 - 06 September 2013, pp.722-726

Abresive wear behavior of powder metalurgy CuSn10 Graphite metal matrix composites produced by powder metallurgy

International Porous Powder Materials Symposium and Exhibition PPM2013, İzmir, Turkey, 3 - 06 September 2013, pp.4

Fabrication and characterization of Al2024-B4C composite powders by mechanical alloying method

16th International Metallurgy & Materials Congress, İstanbul, Turkey, 13 - 15 September 2012, pp.146-153

Optimization of process parameters of Al2024 powder produced by mechanical alloying

16th International Metallurgy & Materials Congress, İstanbul, Turkey, 13 - 15 September 2012, pp.154-163

Yüksek enerjili öğütmeyle üretilen AA2024-B4C kompozit tozların karakterizasyonu

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 17 - 19 November 2011, pp.667-675

AA2024-B4C metal matrisli kompozitlerin mekanik alaşımlama yöntemi ile üretimi ve mikroyapısı

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 17 - 19 November 2011, pp.204-215

Toz metalurjisi yöntemi ile üretilen Al-Al2O3 kompozitlerinin özellikleri üzerine takviye oranının etkisi

1. Ulusal Ege Kompozit Malzemeler Sempozyumu, İzmir, Turkey, 17 - 19 November 2011, pp.144-154

Production Of Al-B4c Functionally Graded Material By Powder Metallurgy Method

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.49-56 Creative Commons License

Production of Al-B4C functionally graded material by powder metallurgy method

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.49-56

The effect of reinforcement ratio on hardness of Al-Al2O3 composites fabricated by mechanical alloying technique

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.232-240

The effect of milling speed on particle morphology and particle size of Al2024 powders prepared by using high energy ball milling

6th International Powder Metallurgy Conferance & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.628-633

The effect of amount of methanol on the properties of Al-Al2O3 composite powders

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.122-129

The effect of gradual process control agent technique on the morphology of Al powders fabricated by high energy ball milling

6th International Powder Metallurgy Conference & Exhibition, Ankara, Turkey, 5 - 09 October 2011, pp.701-710

Aşamalı proses kontrol katkısı tekniğinin yüksek enerjili öğütme prosesi üzerine etkisi

I. Ulusal Nanoteknmoloji Kongresi, İstanbul, Turkey, 17 - 18 June 2011, pp.8-16

Books & Book Chapters

Fabrication of Functionally Graded Metal and Ceramic Powders Synthesized by Electroless Deposition

in: Advanced Surface Coating Techniques for Modern Industrial Applications, , Editor, IGI-Global, pp.150-187, 2020