Yayınlar & Eserler

Yayın Ağı
Makaleler 61
Tümü (61)
SCI-E, SSCI, AHCI (37)
SCI-E, SSCI, AHCI, ESCI (37)
Scopus (38)
TRDizin (1)
Diğer Yayınlar (21)

1. Influence of Workpiece and Abrasive Characteristics on Material Removal Rate in Abrasive Waterjet Cutting of Rock

Kaya S., Aydin G., Karakurt İ.
MINING METALLURGY & EXPLORATION , cilt.43, sa.3, ss.2141-2155, 2026 (SCI-Expanded) Sürdürülebilir Kalkınma

2. Experimental and machine learning associated study into the spontaneous combustion susceptibility of the steam coals

Yilmaz S., EROL İ., KARAKURT İ., AYDIN G., KARABACAK Y. E., Bilen M.
INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION , 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

3. Indirect grinding-based approach for brittleness comparison of various abrasives

Aydin G., Sahinoglu E., Rogai I., Karakurt I., Kaya S.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART E: JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.0, sa.0, ss.1-8, 2026 (SCI-Expanded, Scopus)

4. Macroeconomic-driven Modelling of Turkish Natural Stone Exports through Multiple Nonlinear Regression

KARAKURT İ., Cepowska Z., Cepowski T., AYDIN G.
Mining, Metallurgy and Exploration , cilt.43, sa.2, ss.1007-1020, 2026 (SCI-Expanded, Scopus) Creative Commons License

5. Estimation of primary energy consumption for a panel of five ASEAN countries by models derived from trend analysis

Demir Avcı B., Karakurt İ., Aydın G.
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.19, sa.1, ss.158-178, 2026 (Hakemli Dergi)

6. BRICS Ekonomilerinin Birincil Enerji Tüketimi için Trend Analiziyle Türetilen Tahmin Modelleri

ROGAI I., Karakurt I., Aydin G.
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.9, sa.1, ss.86-104, 2026 (TRDizin) Creative Commons License

7. An Investigation into the Abrasive Waterjet Cutting of Rocks: Improving the Cutting Performance and Leveraging the Machine Learning Algorithms for Modelling

Rogai I., KARAKURT İ., AYDIN G., KARABACAK Y. E., Avci B. D., KAYA S.
Mining, Metallurgy and Exploration , cilt.42, sa.5, ss.2943-2962, 2025 (SCI-Expanded, Scopus)

8. Utilisation of glass waste as an abrasive in abrasive waterjet machining

Aydin G., Amiri M. R., Kaya S., Karakurt I.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.239, sa.22, ss.9332-9346, 2025 (SCI-Expanded, Scopus)

9. Development trend analysis – based forecast models for Türkiye’s fossil fuel consumption

Bektaş N. N., Karakurt İ., Aydın G.
Karadeniz Fen Bilimleri Dergisi , cilt.15, sa.3, ss.1325-1340, 2025 (Hakemli Dergi)

10. Forecasting Models Based on Total Population for Primary Energy Consumption of the N – 11 Countries

Demir Avcı B., Karakurt İ., Aydın G.
Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.30, sa.2, ss.719-736, 2025 (Hakemli Dergi)

11. Modeling and optimization of the declineation angle generated by abrasive waterjet multi-pass and forward angling cuttings using machine learning

Rogai I., KARAKURT İ., AYDIN G., KARABACAK Y. E., Roudini A., Demir Avci B.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2025 (SCI-Expanded, Scopus)

12. Leveraging the trend analysis for modeling of the greenhouse gas emissions associated with coal combustion

KARAKURT İ., Avci B. D., AYDIN G.
Environmental Science and Pollution Research , cilt.31, sa.39, ss.52448-52472, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

13. An experimental study on the cutting depth produced by abrasive waterjet: how do abrasive and rock properties affect the cutting process?

Kaya S., Aydın G., Karakurt İ.
International Journal of Advanced Manufacturing Technology , cilt.125, sa.9-10, ss.4811-4823, 2023 (SCI-Expanded, Scopus)

14. Development of regression models to forecast the CO2 emissions from fossil fuels in the BRICS and MINT countries

KARAKURT İ., AYDIN G.
ENERGY , cilt.263, 2023 (SCI-Expanded, Scopus)

15. Improvement of Rock Cutting Performance through Two-Pass Abrasive Waterjet Cutting

AYDIN G., KARAKURT İ., Amiri M. R., KAYA S.
SUSTAINABILITY , cilt.14, sa.19, 2022 (SCI-Expanded, SSCI, Scopus)

16. Modelling and forecasting the oil consumptions of the BRICS-T countries

Karakurt İ.
Energy , ss.119720, 2021 (SCI-Expanded, Scopus)

17. Yeraltı maden işletmeciliğinde sağlık ve güvenlik sorunları

Aydın G., Karakurt İ.
Teknik Bilimler Dergisi , cilt.11, sa.1, ss.1-12, 2021 (Hakemli Dergi)

18. Energy consumption modelling using socio-economic indicators: Evidence from the BRICS-T countries

Karakurt İ.
Journal of the Southern African Institute of Mining and Metallurgy , cilt.120, sa.7, ss.425-431, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

19. Doğaltaş Üretim ve İşleme Tesisi Atıklarının Değerlendirilmesi

Aydın G., Karakurt İ.
ALKÜ Fen Bilimleri Dergisi , cilt.2, sa.2, ss.62-77, 2020 (Hakemli Dergi)

20. Kömür kaynaklı CO2 emisyonlarının tahminine yönelik model geliştirilmesi: BRICS-T ülkeleri örneği

Karakurt İ., Aydın G.
Karadeniz Fen Bilimleri Dergisi , cilt.10, sa.1, ss.214-229, 2020 (Hakemli Dergi)

21. BRICS-T ülkelerinin kömür tüketimlerinin çoklu regresyon analizi ile tahmini

Karakurt İ., Aydın G., Amırı M. R.
Harran Üniversitesi Mühendislik Dergisi , cilt.5, sa.1, ss.32-45, 2020 (Hakemli Dergi)

22. Aşındırıcı sujetiyle doğaltaş kesmede granit atıklarının aşındırıcı olarak değerlendirilmesi

Aydın G., Kaya S., Karakurt İ., Yıldırım F.
Bilimsel Madencilik Dergisi , cilt.58, sa.3, ss.211-218, 2019 (Hakemli Dergi)

23. Effect of abrasive type on marble cutting performance of abrasive waterjet

Aydın G., Kaya S., Karakurt İ.
ARABIAN JOURNAL OF GEOSCIENCES , cilt.12, sa.11, 2019 (SCI-Expanded, Scopus)

24. Utilization of solid-cutting waste of granite as an alternative abrasive in abrasive waterjet cutting of marble

Aydın G., Kaya S., Karakurt İ.
JOURNAL OF CLEANER PRODUCTION , cilt.159, ss.241-247, 2017 (SCI-Expanded, Scopus)

25. Performance Prediction of Diamond Sawblades Using Artificial Neural Network and Regression Analysis

AYDIN G., KARAKURT İ., Hamzacebi C.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.40, sa.7, ss.2003-2012, 2015 (SCI-Expanded, Scopus)

26. Forecasting the Energy-related CO2 Emissions of Turkey Using a Grey Prediction Model

Hamzacebi C., Karakurt İ.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.37, sa.9, ss.1023-1031, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

27. Artificial neural network and regression models for performance prediction of abrasive waterjet in rock cutting

AYDIN G., KARAKURT İ., Hamzacebi C.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.75, ss.1321-1330, 2014 (SCI-Expanded, Scopus)

28. Application of Taguchi method for cutting force optimization in rock sawing by circular diamond sawblades

Karakurt İ.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.39, sa.5, ss.1055-1070, 2014 (SCI-Expanded, Scopus)

29. An investigation on the kerf width in abrasive waterjet cutting of granitic rocks

KARAKURT İ., AYDIN G., AYDINER K.
ARABIAN JOURNAL OF GEOSCIENCES , cilt.7, sa.7, ss.2923-2932, 2014 (SCI-Expanded, Scopus)

30. Specific energy optimization in sawing of rocks using Taguchi approach

Karakurt İ.
JOURNAL OF CENTRAL SOUTH UNIVERSITY , cilt.21, sa.1, ss.365-372, 2014 (SCI-Expanded, Scopus)

31. Wear Performance of Saw Blades in Processing of Granitic Rocks and Development of Models for Wear Estimation

AYDIN G., KARAKURT İ., AYDINER K.
ROCK MECHANICS AND ROCK ENGINEERING , cilt.46, sa.6, ss.1559-1575, 2013 (SCI-Expanded, Scopus)

32. Prediction of the Cut Depth of Granitic Rocks Machined by Abrasive Waterjet (AWJ)

AYDIN G., KARAKURT İ., AYDINER K.
ROCK MECHANICS AND ROCK ENGINEERING , cilt.46, sa.5, ss.1223-1235, 2013 (SCI-Expanded, Scopus)

33. Development of Predictive Models for the Specific Energy of Circular Diamond Sawblades in the Sawing of Granitic Rocks

AYDIN G., KARAKURT İ., AYDINER K.
ROCK MECHANICS AND ROCK ENGINEERING , cilt.46, sa.4, ss.767-783, 2013 (SCI-Expanded, Scopus)

34. Investigation of the surface roughness of rocks sawn by diamond sawblades

AYDIN G., KARAKURT İ., AYDINER K.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES , cilt.61, ss.171-182, 2013 (SCI-Expanded, Scopus)

35. Diamond recovery from waste sawblades: A preliminary investigation

CELEP O., AYDIN G., KARAKURT İ.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.227, sa.6, ss.917-921, 2013 (SCI-Expanded, Scopus)

36. Predictive modelling of noise level generated during sawing of rocks by circular diamond sawblades

KARAKURT İ., AYDIN G., AYDINER K.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.38, sa.3, ss.491-511, 2013 (SCI-Expanded, Scopus) Creative Commons License

37. Experimental and statistical analysis of cutting force acting on diamond sawblade in sawing of granitic rocks

KARAKURT İ., AYDIN G., AYDINER K.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.227, ss.286-300, 2013 (SCI-Expanded, Scopus)

38. Effect of operating variables on specific wear rate of diamond sawblades in sawing of granites

Karakurt İ., Aydın G., Aydıner K.
Engineering Science and Technology, An International Journal , cilt.16, sa.1, ss.11-16, 2013 (Hakemli Dergi)

39. A study on the prediction of kerf angle in abrasive waterjet machining of rocks

KARAKURT İ., AYDIN G., AYDINER K.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.226, ss.1489-1499, 2012 (SCI-Expanded, Scopus)

40. Performance of Abrasive Waterjet in Granite Cutting: Influence of the Textural Properties

AYDIN G., KARAKURT İ., AYDINER K.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.24, sa.7, ss.944-949, 2012 (SCI-Expanded, Scopus)

41. Development of predictive models for specific energy of diamond sawblades concerning operating variables

Aydın G., Karakurt İ., Aydıner K.
Engineering Science and Technology, An International Journal , cilt.15, sa.4, ss.155-161, 2012 (Hakemli Dergi)

42. Sources and mitigation of methane emissions by sectors: A critical review

KARAKURT İ., AYDIN G., AYDINER K.
RENEWABLE ENERGY , cilt.39, sa.1, ss.40-48, 2012 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

43. Doğal gaz ve petrol sistemlerinden kaynaklanan metan emisyonlarının analizi: 1990–2010

Karakurt İ., Aydın G., Aydıner K.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.28, sa.3, ss.205-224, 2012 (Hakemli Dergi)

44. Analysis and Mitigation Opportunities of Methane Emissions from the Energy Sector

AYDIN G., Karakurt İ., Aydiner K.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.34, sa.11, ss.967-982, 2012 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

45. An Experimental Study on the Depth of Cut of Granite in Abrasive Waterjet Cutting

KARAKURT İ., AYDIN G., AYDINER K.
MATERIALS AND MANUFACTURING PROCESSES , cilt.27, sa.5, ss.538-544, 2012 (SCI-Expanded, Scopus)

46. Analysis of the kerf angle of the granite machined by abrasive waterjet (AWJ)

KARAKURT İ., AYDIN G., AYDINER K.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.18, sa.6, ss.435-442, 2011 (SCI-Expanded, Scopus)

47. An investigation on surface roughness of granite machined by abrasive waterjet

AYDIN G., KARAKURT İ., AYDINER K.
BULLETIN OF MATERIALS SCIENCE , cilt.34, sa.4, ss.985-992, 2011 (SCI-Expanded, Scopus) Creative Commons License

48. Kayaç tane boyutunun aşındırıcı su jeti (ASJ) kesme performansına etkisi

Karakurt İ., Aydın G., Aydıner K.
Madencilik , cilt.50, sa.1, ss.23-32, 2011 (Hakemli Dergi)

49. Mine ventilation air methane as a sustainable energy source

KARAKURT İ., AYDIN G., AYDINER K.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS , cilt.15, sa.2, ss.1042-1049, 2011 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

50. A machinability study of granite using abrasive waterjet cutting technology

Karakurt İ., Aydın G., Aydıner K.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.24, sa.1, ss.143-151, 2011 (Scopus)

51. Antropojenik metan emisyonlarının sektörel analizi

Aydın G., Karakurt İ., Aydıner K.
TÜBAV Bilim Dergisi , cilt.4, sa.1, ss.42-51, 2011 (Hakemli Dergi)

52. Evaluation of geologic storage options of CO2: Applicability, cost, storage capacity and safety

AYDIN G., KARAKURT İ., AYDINER K.
ENERGY POLICY , cilt.38, sa.9, ss.5072-5080, 2010 (SCI-Expanded, SSCI, Scopus) Sürdürülebilir Kalkınma

53. Aşındırıcı su jeti ile kesmede çalışma parametrelerinin granit kerf açısına etkisinin araştırılması

Aydın G., Karakurt İ., Aydıner K.
Madencilik , cilt.49, sa.2, ss.17-26, 2010 (Hakemli Dergi)

54. Effect of the abrasive grain size on the cutting performance of concrete in abrasive waterjet technology

Karakurt İ., Aydın G., Aydıner K.
Technology , cilt.13, sa.3, ss.145-150, 2010 (Hakemli Dergi)

55. Aşındırıcılı su jeti ile kesmede kesme parametrelerinin granit yüzey pürüzlülüğüne etkisi

Karakurt İ., Aydın G., Aydıner K.
Hacettepe Üniversitesi Yerbilimleri Dergisi , cilt.31, sa.2, ss.99-110, 2010 (Hakemli Dergi)

56. Ocak havasındaki düşük konsantrasyonlu metanın azaltım ve kullanım teknolojileri

Karakurt İ., Aydın G., Aydıner K.
Sigma Mühendislik ve Fen Bilimleri Dergisi , cilt.28, ss.49-65, 2010 (Hakemli Dergi)

57. Su jeti teknolojisinin madencilik sektöründeki uygulamalarının değerlendirilmesi

Karakurt İ., Aydın G., Aydıner K.
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.16, sa.1, ss.113-121, 2010 (Hakemli Dergi)

58. Assessment of the surface quality of the granite cut by abrasive waterjet

Aydın G., Karakurt İ., Aydıner K.
Technology , cilt.13, sa.1, ss.41-48, 2010 (Hakemli Dergi)

59. İşletilemeyen kömür damarlarında karbondioksitin depolanması

Aydın G., Karakurt İ., Aydıner K.
Madencilik , cilt.48, sa.4, ss.31-44, 2009 (Hakemli Dergi)

60. Yeraltı jeolojik rezervuarlarında karbondioksitin depolanması

Karakurt İ., Aydın G., Aydıner K.
TÜBAV Bilim Dergisi , cilt.2, sa.2, ss.175-184, 2009 (Hakemli Dergi)

61. Yeraltı kömür damarlarından üretilen metanın kullanım teknolojileri

Aydın G., Karakurt İ.
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.15, sa.1, ss.129-136, 2009 (Hakemli Dergi)
Kitaplar 4

1. Methane emission from coalbed

AYDIN G., KARAKURT İ.
Advances and Technology Development in Greenhouse Gases: Emission, Capture and Conversion: Greenhouse Gases Emissions and Climate Change, Elsevier, ss.3-30, 2024

2. Introduction to Fossil Fuels

Aydın G., Karakurt İ.
Encyclopedia of Renewable Energy, Sustainability and the Environment, Mohammad Reza Rahimpour, Editör, Elsevier Science, Oxford/Amsterdam , Amsterdam, ss.55-60, 2024

3. Abrasive Water Jet Machining (AWJM)

Aydın G., Karakurt İ.
Advanced Machining Science, Vijay Kumar Jain, Editör, Taylor eBookstore , Florida, ss.1-22, 2022

4. An Analysis of Coal Mine Methane Emissions: Available and Emerging Utilization or Mitigation Technologies

AYDINER K., AYDIN G., KARAKURT İ.
Liquid Fuels: Types, Properties and Production, Domenic A. Carasillo, Editör, NOVA Science Publishers Inc. , New York, ss.47-97, 2012
Metrikler

Yayın

65

Yayın (WoS)

37

Yayın (Scopus)

38

Atıf (WoS)

1771

H-İndeks (WoS)

25

Atıf (Scopus)

1994

H-İndeks (Scopus)

26

Atıf (Scholar)

1596

H-İndeks (Scholar)

16

Atıf (Sobiad)

42

H-İndeks (Sobiad)

5

Tez Danışmanlığı

8

Açık Erişim

4
BM Sürdürülebilir Kalkınma Amaçları
SDG 1: AMAÇ 1: YOKSULLUĞA SON
SDG 3: AMAÇ 3: SAĞLIKLI BİREYLER
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ
SDG 8: AMAÇ 8: İNSANA YAKIŞIR İŞ VE EKONOMİK BÜYÜME
SDG 9: AMAÇ 9: SANAYİ, YENİLİKÇİLİK VE ALTYAPI
SDG 11: AMAÇ 11: SÜRDÜRÜLEBİLİR ŞEHİR VE YAŞAM ALANLARI
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM
SDG 13: AMAÇ 13: İKLİM EYLEMİ
SDG 17: AMAÇ 17: AMAÇLAR İÇİN ORTAKLIKLAR